fltk/documentation/common.dox

/**

 \page	common	3 - Common Widgets and Attributes

<P>This chapter describes many of the widgets that are provided
with FLTK and covers how to query and set the standard
attributes.</P>

<H2>Buttons</H2>

<P>FLTK provides many types of buttons:</P>

<UL>
	<LI>Fl_Button - A standard push button.</LI>

	<LI>Fl_Check_Button - A button with a check box.</LI>

	<LI>Fl_Light_Button - A push button with a light.</LI>

	<LI>Fl_Repeat_Button - A push button that repeats
		when held.</LI>

	<LI>Fl_Return_Button - A push button that is activated
		by the <KBD>Enter</KBD> key.</LI>

	<LI>Fl_Round_Button - A button with a radio circle.</LI>

</UL>

\image html buttons.gif "Figure 3-1: FLTK Button Widgets"

<P>All of these buttons just need the corresponding
<TT><FL/Fl_xyz_Button.H></TT> header file. The constructor
takes the bounding box of the button and optionally a label
string:</P>

\code
Fl_Button *button = new Fl_Button(x, y, width, height, "label");
Fl_Light_Button *lbutton = new Fl_Light_Button(x, y, width, height);
Fl_Round_Button *rbutton = new Fl_Round_Button(x, y, width, height, "label");
\endcode

<P>Each button has an associated <TT>type()</TT> which allows
it to behave as a push button, toggle button, or radio button:</P>

\code
button->type(FL_NORMAL_BUTTON);
lbutton->type(FL_TOGGLE_BUTTON);
rbutton->type(FL_RADIO_BUTTON);
\endcode

<P>For toggle and radio buttons, the value() method returns 
the current button state (0 = off, 1 = on). The set() and
clear() methods can be used on toggle buttons to turn a 
toggle button on or off, respectively. 
Radio buttons can be turned on with the setonly()
method; this will also turn off other radio buttons in the same
group.</P>

<H2>Text</H2>

<P>FLTK provides several text widgets for displaying and receiving text:</P>

<UL>
	<LI>Fl_Input - A one-line text input field.</LI>

	<LI>Fl_Output - A one-line text output field.</LI>

	<LI>Fl_Multiline_Input - A multi-line text input field.</LI>

	<LI>Fl_Multiline_Output	- A multi-line text output field.</LI>

	<LI>Fl_Text_Display - A multi-line text display widget.</LI>

	<LI>Fl_Text_Editor - A multi-line text editing widget.</LI>

	<LI>Fl_Help_View - A HTML text display widget.</LI>
</UL>

<P>The <TT>Fl_Output</TT> and <TT>Fl_Multiline_Output</TT>
widgets allow the user to copy text from the output field but
not change it.</P>

<P>The <TT>value()</TT> method is used to get or set the 
string that is displayed:</P>

\code
Fl_Input *input = new Fl_Input(x, y, width, height, "label");
input->value("Now is the time for all good men...");
\endcode

<P>The string is copied to the widget's own storage when you set
the <tt>value()</tt> of the widget.</P>

<P>The <TT>Fl_Text_Display</TT> and <TT>Fl_Text_Editor</TT>
widgets use an associated <TT>Fl_Text_Buffer</TT> class for the
value, instead of a simple string.</P>

<!-- NEED 4in -->

<H2>Valuators</H2>

<P>Unlike text widgets, valuators keep track of numbers instead of
strings. FLTK provides the following valuators:</P>

<UL>

	<LI>Fl_Counter - A widget with arrow buttons that shows the
		current value.</LI>

	<LI>Fl_Dial - A round knob.</LI>

	<LI>Fl_Roller - An SGI-like dolly widget.</LI>

	<LI>Fl_Scrollbar - A standard scrollbar widget.</LI>

	<LI>Fl_Slider - A scrollbar with a knob.</LI>

	<LI>Fl_Value_Slider - A slider that shows the current value.</LI>

</UL>

\image html valuators.gif "Figure 3-2: FLTK valuator widgets"

<P>The <TT>value()</TT> method gets and sets the current value 
of the widget. The <TT>minimum()</TT> and <TT>maximum()</TT>
methods set the range of values that are reported by the
widget.</P>

<!-- NEED 5in -->

<H2>Groups</H2>

<P>The <TT>Fl_Group</TT> widget class is used as a general
purpose "container" widget. Besides grouping radio
buttons, the groups are used to encapsulate windows, tabs, and
scrolled windows. The following group classes are available
with FLTK:</P>

<UL>

	<LI>Fl_Double_Window - A double-buffered window on the screen.</LI>

	<LI>Fl_Gl_Window - An OpenGL window on the screen.</LI>

	<LI>Fl_Group - The base container class; can be used to group
		any widgets together.</LI>

	<LI>Fl_Pack - A collection of widgets that are packed into the group area.</LI>

	<LI>Fl_Scroll - A scrolled window area.</LI>

	<LI>Fl_Tabs - Displays child widgets as tabs.</LI>

	<LI>Fl_Tile - A tiled window area.</LI>

	<LI>Fl_Window - A window on the screen.</LI>

	<LI>Fl_Wizard - Displays one group of widgets at a time.</LI>

</UL>

<H2>Setting the Size and Position of Widgets</H2>

<P>The size and position of widgets is usually set when you
create them. You can access them with the <tt>x()</tt>,
<tt>y()</tt>, <tt>w()</tt>, and <tt>h()</tt> methods.</P>

<P>You can change the size and position by using the
<TT>position()</TT>, <TT> resize()</TT>, and <TT>size()</TT>
methods:</P>

\code
button->position(x, y);
group->resize(x, y, width, height);
window->size(width, height);
\endcode

<P>If you change a widget's size or position after it is
displayed you will have to call <tt>redraw()</tt> on the
widget's parent.</P>

<H2><A NAME="colors">Colors</A></H2>

<P>FLTK stores the colors of widgets as an 32-bit unsigned
number that is either an index into a color palette of 256
colors or a 24-bit RGB color. The color palette is <i>not</i>
the X or WIN32 colormap, but instead is an internal table with
fixed contents.</P>

<P>There are symbols for naming some of the more common colors:</P>

<UL>
	<LI><TT>FL_BLACK</TT></LI>

	<LI><TT>FL_RED</TT></LI>

	<LI><TT>FL_GREEN</TT></LI>

	<LI><TT>FL_YELLOW</TT></LI>

	<LI><TT>FL_BLUE</TT></LI>

	<LI><TT>FL_MAGENTA</TT></LI>

	<LI><TT>FL_CYAN</TT></LI>

	<LI><TT>FL_WHITE</TT></LI>

	<LI>FL_WHITE</LI>
</UL>

<P>These symbols are the default colors for all FLTK widgets. They are
explained in more detail in the chapter 
<A HREF="enumerations.html#colors">Enumerations</A></P>

<UL>
	<LI><TT>FL_FOREGROUND_COLOR</TT> </LI>

	<LI><TT>FL_BACKGROUND_COLOR</TT> </LI>

	<LI><TT>FL_INACTIVE_COLOR</TT> </LI>

	<LI><TT>FL_SELECTION_COLOR</TT> </LI>
</UL>

<P>RGB colors can be set using the <TT>fl_rgb_color()</TT>
function:</P>

\code
Fl_Color c = fl_rgb_color(85, 170, 255);
\endcode

<P>The widget color is set using the <TT>color()</TT> method:</P>

\code
button->color(FL_RED);
\endcode

<P>Similarly, the label color is set using the <TT>labelcolor()</TT>
method:</P>

\code
button->labelcolor(FL_WHITE);
\endcode

<H2><A NAME="boxtypes">Box Types</A></H2>

<P>The type <TT>Fl_Boxtype</TT> stored and returned in Fl_Widget::box()
is an enumeration defined in Enumerations.H.

Figure 3-3 shows the standard box types included with FLTK.</P>

\image html boxtypes.gif "Figure 3-3: FLTK box types"

<P><TT>FL_NO_BOX</TT> means nothing is drawn at all, so whatever is
already on the screen remains. The <TT>FL_..._FRAME</TT> types only
draw their edges, leaving the interior unchanged. The blue color in
Figure 3-3 is the area that is not drawn by the frame types.</P>

<H3>Making Your Own Boxtypes</H3>

<P>You can define your own boxtypes by making a small function that draws
the box and adding it to the table of boxtypes.</P>

<CENTER><TABLE WIDTH="80%" BORDER="1" CELLPADDING="5" CELLSPACING="0" BGCOLOR="#cccccc">
<TR>
	<TD><B>Note:</B>
	<P>This interface has changed in FLTK 2.0!</P>
	</TD>
</TR>
</TABLE></CENTER>

<H4>The Drawing Function</H4>

<P>The drawing function is passed the bounding box and background color
for the widget:</P>

\code
void xyz_draw(int x, int y, int w, int h, Fl_Color c) {
...
}
\endcode

<!-- NEED 3in -->

<P>A simple drawing function might fill a rectangle with the
given color and then draw a black outline:</P>

\code
void xyz_draw(int x, int y, int w, int h, Fl_Color c) {
  fl_color(c);
  fl_rectf(x, y, w, h);
  fl_color(FL_BLACK);
  fl_rect(x, y, w, h);
}
\endcode

<H4><A name="fl_down">Fl_Boxtype fl_down(Fl_Boxtype)</A></H4>

<P><tt>fl_down</tt> returns the "pressed" or "down" version of a box.
If no "down" version of a given box exists, the behavior of this function
is undefined and some random box or frame is returned.
See also: <A HREF="drawing.html#fl_frame">fl_frame drawing</A>.

<H4><A name="fl_frame">Fl_Boxtype fl_frame(Fl_Boxtype)</A></H4>

<P><tt>fl_frame</tt> returns the unfilled, frame-only version of a box.
If no frame version of a given box exists, the behavior of this function
is undefined and some random box or frame is returned.
See also: <A HREF="drawing.html#fl_frame">fl_frame drawing</A>.

<H4><A name="fl_box">Fl_Boxtype fl_box(Fl_Boxtype)</A></H4>

<P><tt>fl_box</tt> returns the filled version of a frame.
If no filled version of a given frame exists, the behavior of this function
is undefined and some random box or frame is returned.
See also: <TT><A HREF="#fl_frame">fl_frame</A></TT>.

<H4>Adding Your Box Type</H4>

<P>The <TT>Fl::set_boxtype()</TT> method adds or replaces the
specified box type:</P>

\code
#define XYZ_BOX FL_FREE_BOXTYPE

Fl::set_boxtype(XYZ_BOX, xyz_draw, 1, 1, 2, 2);
\endcode

<P>The last 4 arguments to <TT>Fl::set_boxtype()</TT> are the
offsets for the x, y, width, and height values that should be
subtracted when drawing the label inside the box.</P>

<P>A complete box design contains four box types in this order: 
a filled, neutral box (<TT>UP_BOX</TT>), a filled, depressed box 
(<TT>DOWN_BOX</TT>), and the same as outlines only (<TT>UP_FRAME</TT> 
and <TT>DOWN_FRAME</TT>). The function 
<TT><A HREF="#fl_down">fl_down(Fl_Boxtype)</A></TT> 
expects the neutral design on a boxtype with a numerical 
value evenly divideable by two. 
<TT><A HREF="#fl_frame">fl_frame(Fl_Boxtype)</A></TT> 
expects the <TT>UP_BOX</TT> design at a value divideable by four.</P>

<H2><A NAME="labels">Labels and Label Types</A></H2>

<P>The <TT>label()</TT>, <TT>align()</TT>, <TT>labelfont()</TT>,
<TT>labelsize()</TT>, <TT>labeltype()</TT>, <TT>image()</TT>, and
<TT>deimage()</TT> methods control the labeling of widgets.</P>

<H3>label()</H3>

<P>The <TT>label()</TT> method sets the string that is displayed
for the label. Symbols can be included with the label string by
escaping them using the "@" symbol - "@@" displays a single at
sign. Figure 3-4 shows the available symbols.</P>

\image html symbols.gif "Figure 3-4: FLTK label symbols"

<!-- NEED 2in -->

<P>The @ sign may also be followed by the following optional
"formatting" characters, in this order:</P>

<UL>

	<LI>'#' forces square scaling, rather than distortion to
	the widget's shape.</LI>

	<LI>+[1-9] or -[1-9] tweaks the scaling a little bigger
	or smaller.</LI>

	<LI>'$' flips the symbol horizontaly, '%' flips it verticaly.</LI>

	<LI>[0-9] - rotates by a multiple of 45 degrees. '5' and
	'6' do no rotation while the others point in the
	direction of that key on a numeric keypad. '0', followed by four
	more digits rotates the symbol by that amount in degrees.</LI>

</UL>

<P>Thus, to show a very large arrow pointing downward you would use the
label string "@+92->".

<H3>align()</H3>

<P>The <TT>align()</TT> method positions the label. The following
constants are defined and may be OR'd together as needed:</P>

<UL>

	<LI><TT>FL_ALIGN_CENTER</TT> - center the label in the widget.</LI>

	<LI><TT>FL_ALIGN_TOP</TT> - align the label at the top of the widget.</LI>

	<LI><TT>FL_ALIGN_BOTTOM</TT> - align the label at the bottom of the
	widget.</LI>

	<LI><TT>FL_ALIGN_LEFT</TT> - align the label to the left of the widget.</LI>

	<LI><TT>FL_ALIGN_RIGHT</TT> - align the label to the right of the
	widget.</LI>

	<LI><TT>FL_ALIGN_INSIDE</TT> - align the label inside the widget.</LI>

	<LI><TT>FL_ALIGN_CLIP</TT> - clip the label to the widget's bounding
	box.</LI>

	<LI><TT>FL_ALIGN_WRAP</TT> - wrap the label text as needed.</LI>

	<LI><TT>FL_TEXT_OVER_IMAGE</TT> - show the label text over the image.</LI>

	<LI><TT>FL_IMAGE_OVER_TEXT</TT> - show the label image over the text (default).</LI>

</UL>

<H3><A NAME="labeltypes">labeltype()</A></H3>

<P>The <TT>labeltype()</TT> method sets the type of the label.  The
following standard label types are included:</P>

<UL>

	<LI><TT>FL_NORMAL_LABEL</TT> - draws the text.</LI>

	<LI><TT>FL_NO_LABEL</TT> - does nothing.</LI>

	<LI><TT>FL_SHADOW_LABEL</TT> - draws a drop shadow under
	the text.</LI>

	<LI><TT>FL_ENGRAVED_LABEL</TT> - draws edges as though
	the text is engraved.</LI>

	<LI><TT>FL_EMBOSSED_LABEL</TT> - draws edges as thought
	the text is raised.</LI>

	<LI><TT>FL_ICON_LABEL</TT> - draws the icon associated
	with the text.</LI>

</UL>

<H3>image() and deimage()</H3>

<P>The <TT>image()</TT> and <TT>deimage()</TT> methods set an image that
will be displayed with the widget. The <TT>deimage()</TT> method sets the
image that is shown when the widget is inactive, while the <TT>image()</TT>
method sets the image that is shown when the widget is active.</P>

<P>To make an image you use a subclass of
<A HREF="drawing.html#Fl_Image"><TT>Fl_Image</TT></A>.</P>

<H4>Making Your Own Label Types</H4>

<P>Label types are actually indexes into a table of functions
that draw them. The primary purpose of this is to use this to
draw the labels in ways inaccessible through the
<TT>fl_font</TT> mechanisim (e.g. <TT>FL_ENGRAVED_LABEL</TT>) or
with program-generated letters or symbology.</P>

<CENTER><TABLE WIDTH="80%" BORDER="1" CELLPADDING="5" CELLSPACING="0" BGCOLOR="#cccccc">
<TR>
	<TD><B>Note:</B>
	<P>This interface has changed in FLTK 2.0!</P>
	</TD>
</TR>
</TABLE></CENTER>

<H5>Label Type Functions</H5>

<P>To setup your own label type you will need to write two
functions: one to draw and one to measure the label. The draw
function is called with a pointer to a <TT>Fl_Label</TT>
structure containing the label information, the bounding box for
the label, and the label alignment:</P>

\code
void xyz_draw(const Fl_Label *label, int x, int y, int w, int h, Fl_Align align) {
...
}
\endcode

<P>The label should be drawn <I>inside</I> this bounding box,
even if <TT>FL_ALIGN_INSIDE</TT> is not enabled. The function
is not called if the label value is <TT>NULL</TT>.</P>

<P>The measure function is called with a pointer to a
<TT>Fl_Label</TT> structure and references to the width and
height:</P>

\code
void xyz_measure(const Fl_Label *label, int &w, int &h) {
...
}
\endcode

<P>The function should measure the size of the label and set
<TT>w</TT> and <TT>h</TT> to the size it will occupy.</P>

<H5>Adding Your Label Type</H5>

<P>The <TT>Fl::set_labeltype</TT> method creates a label type
using your draw and measure functions:</P>

\code
#define XYZ_LABEL FL_FREE_LABELTYPE

Fl::set_labeltype(XYZ_LABEL, xyz_draw, xyz_measure);
\endcode

<P>The label type number <TT>n</TT> can be any integer value
starting at the constant <TT>FL_FREE_LABELTYPE</TT>. Once you
have added the label type you can use the <TT>labeltype()</TT>
method to select your label type.</P>

<P>The <TT>Fl::set_labeltype</TT> method can also be used to overload
an existing label type such as <TT>FL_NORMAL_LABEL</TT>.</P>

<H4><A NAME="add_symbol">Making your own symbols</A></H4>

<P>It is also possible to define your own drawings and add
them to the symbol list, so they can be rendered as part of
any label.</P>

<P>To create a new symbol, you implement a drawing function 
<tt>void drawit(Fl_Color c)</tt> which typically uses the
<a href="drawing.html#complex">complex drawing functions</a>
to generate a vector shape inside a two-by-two units sized box
around the origin. This function is then linked into the symbols
table using <tt>fl_add_symbol</tt>:</P>

\code
int fl_add_symbol(const char *name, void (*drawit)(Fl_Color), int scalable)
\endcode

<P><i>name</i> is the name of the symbol without the "@"; <i>scalable</I>
must be set to 1 if the symbol is generated using scalable vector drawing
functions.</P>

\code
int fl_draw_symbol(const char *name,int x,int y,int w,int h,Fl_Color col)
\endcode

<P>This function draws a named symbol fitting the given rectangle.

<H2>Callbacks</H2>

<P>Callbacks are functions that are called when the value of a
widget changes. A callback function is sent a <TT>Fl_Widget</TT>
pointer of the widget that changed and a pointer to data that
you provide:</P>

\code
void xyz_callback(Fl_Widget *w, void *data) {
...
}
\endcode

<P>The <TT>callback()</TT> method sets the callback function for a
widget. You can optionally pass a pointer to some data needed for the
callback:</P>

\code
int xyz_data;

button->callback(xyz_callback, &xyz_data);
\endcode

<P>Normally callbacks are performed only when the value of the
widget changes. You can change this using the Fl_Widget::when()
method:</P>

\code
button->when(FL_WHEN_NEVER);
button->when(FL_WHEN_CHANGED);
button->when(FL_WHEN_RELEASE);
button->when(FL_WHEN_RELEASE_ALWAYS);
button->when(FL_WHEN_ENTER_KEY);
button->when(FL_WHEN_ENTER_KEY_ALWAYS);
button->when(FL_WHEN_CHANGED | FL_WHEN_NOT_CHANGED);
\endcode

<CENTER><TABLE WIDTH="80%" BORDER="1" CELLPADDING="5" CELLSPACING="0" BGCOLOR="#cccccc">
<TR>
	<TD><B>Note:</B>

	<P>You cannot delete a widget inside a callback, as the
	widget may still be accessed by FLTK after your callback
	is completed. Instead, use the Fl::delete_widget()
	method to mark your widget for deletion when it is safe
	to do so.</p>

	<p><B>Hint:</B>

	<P>Many programmers new to FLTK or C++ try to use a
	non-static class method instead of a static class method
	or function for their callback. Since callbacks are done
	outside a C++ class, the <TT>this</TT> pointer is not
	initialized for class methods.</P>

	<P>To work around this problem, define a static method
	in your class that accepts a pointer to the class, and
	then have the static method call the class method(s) as
	needed. The data pointer you provide to the
	<TT>callback()</TT> method of the widget can be a
	pointer to the instance of your class.</P>

\code
class Foo {
  void my_callback(Fl_Widget *w);
  static void my_static_callback(Fl_Widget *w, void *f) { ((Foo *)f)->my_callback(w); }
  ...
}

...

w->callback(my_static_callback, (void *)this);
\endcode
	</TD>
</TR>
</TABLE></CENTER>

<H2>Shortcuts</H2>

<P>Shortcuts are key sequences that activate widgets such as
buttons or menu items. The <TT>shortcut()</TT> method sets the
shortcut for a widget:</P>

\code
button->shortcut(FL_Enter);
button->shortcut(FL_SHIFT + 'b');
button->shortcut(FL_CTRL + 'b');
button->shortcut(FL_ALT + 'b');
button->shortcut(FL_CTRL + FL_ALT + 'b');
button->shortcut(0); // no shortcut
\endcode

<P>The shortcut value is the key event value - the ASCII value
or one of the special keys like
<a href="enumerations.html#key_values"><TT>FL_Enter</TT></a> -
combined with any modifiers like <KBD>Shift</KBD>,
<KBD>Alt</KBD>, and <KBD>Control</KBD>.</P>

*/