Implements the decoding of video streams using common H264 decoders. We also implement
a trivial feedback algorithm.
Sponsored by: Rangee GmbH (http://www.rangee.de)
Leverages libavcodec's hw decode support to provide VA-API based
hardware decoding. Depends on the local build of ffmpeg having hardware
VA-API support compiled in and the appropriate libva drivers and
libraries installed.
Since ec027bf dynamic resolution is broken when used with egfx. Before that commit
we were tracking a server sent resize by setting a DesktopResize callback. This callback
is called when the desktop is resized by the server. Anyway the problem was that when this
callback is called, the activation sequence is not always completed, which were leading to
some freeze with 2012r2 servers (sending packets before the sequence is finished).
So with the faulty commit, we are tracking server resizes by subscribing to the Actived
event, that is called at the end of a reactivation sequence, so we're sure to not send packets
when not fully activated.
Anyway the issue that shows on (#4330) is that when you use egfx, no reactivation sequence happens,
the server only sends a ResetGraphics message with the new size, and so we miss the resized event.
This fix introduces a new GraphicsReset event, makes the display channel subscribe to that event,
and react accordingly.
The coordinates from RDP ROP commands do not (always) have
0,0 as the origin of the drawing operation.
Adjust the coordinates to our local coordinate system.
If the display channel is available we use it to allow the user to resize the
xfreerdp window. When the window is resized we announce a new monitor layout and
the server reacts by doing a reactivation sequence to the new size.
The minimum window size is limited to 300x300 as 2012 servers crash horribly
if we send them a smaller layout.
This option will ensure that NLA is disabled(since NTLM uses weak crypto algorithms), FIPS
encryption is enabled, and ensure fips mode is enabled for openssl.
Selectively override specific uses of MD5/RC4 with new API calls specifically tailored to override FIPS.
Add comments on why overriding the use of these algorithms under FIPS is acceptable for the locations where overrides happen.
Remove check of server proprietary certificate which was already being ignore to avoid use of MD5.
Initialize winpr openssl earlier to ensure fips mode is set before starting using any crypto algorithms.
Add the sshagent plugin to forward the ssh-agent protocol over an RDP
dynamic virtual channel, just as the normal ssh-agent forwards it over
an SSH channel. Add the "/ssh-agent" command line option to enable it.
Usage:
Run FreeRDP with the ssh-agent plugin enabled:
xfreerdp /ssh-agent ...
In the remote desktop session run xrdp-ssh-agent and evaluate the output
in the shell as for ssh-agent to set the required environment variables
(specifically $SSH_AUTH_SOCK):
eval "$(xrdp-ssh-agent -s)"
This is the same as for the normal ssh-agent. You would typically do
this in your Xsession or /etc/xrdp/startwm.sh.
Limitations:
1. Error checking and handling could be improved.
2. This is only tested on Linux and will only work on systems where
clients talk to the ssh-agent via Unix domain sockets. It won't
currently work on Windows but it could be ported.
If the size parameter is used with a percentages like /size:50% now
an additional 'w' or 'h' can be appended (like /size:50%w) to specify
where the percentage should be applied. If both or none are set the
behavior is like it was before and the percentage is applied to width
and height.
Adds a callback that allows servers to compute NTLM hashes by themselves. The typical
use of this callback is to provide a function that gives precomputed hash values.
Sponsored by: Wheel Systems (http://www.wheelsystems.com)
The H264 context is surface specific, so in multi-monitor (with multiple surfaces)
the decoding was failing. This patch fixes that by introducing a surface specific
h264 context.
clipDataId is an optional field of CLIPRDR_FILECONTENTS_REQUEST.
The client should not send it to the server without sending a prior
CLIPRDR_LOCK_CLIPDATA request. The reverse is true as well: the
server should not include these additional 4 bytes without locking
the file in question.
The value zero is a valid ID, it cannot be used as a sentinel value.
Introduce a separate flag to tell whether the clipDataId has been set
and can be relied upon.
Also fix formatting. These stupid line breaks have negative impact on
readability, and the lines do fit into the 100 column limit either way.
To handle a new format we should first be able to transform the format
name from the local clipboard owner into its remote representation. In
our case this will be trasforming the "text/uri-list" target into the
"FileGroupDescriptorW" named format.
Add CB_FORMAT_TEXTURILIST to identify the local format by its ID during
the data conversion step. This numeric ID has nothing to do with the ID
which will be sent to server. It's a bit weird, but that's how XFreeRDP
works.
After that add a new client format with this ID and appropriate local
and remote format names (in atom and formatName fields respectively).
Do this only if wClipboard actually supports "text/uri-list" format.
(It could fail to initialize the local file subsystem, in which case
it will fail all file-related requests and there would be no point in
advertising the file format support in the first place.)
Finally, handle the actual format data request for a new named format
in xf_cliprdr_process_requested_data(). Remember to convert the
FILEDESCRIPTOR array we receive from wClipboard into the
CLIPRDR_FILELIST expected by the server. Also take care to not leak
memory during this conversion.
Note that this handles only the CLIPRDR_FORMAT_DATA_REQUEST. The server
is still not able to retrieve the file content as this is done via a
separate request-reply sequence.
The format is described in MS-RDPECLIP 2.2.5.2.3 Packed File List
(CLIPRDR_FILELIST). These functions handle conversion between the
on-the-wire data from cliprdr and arrays of FILEDESCRIPTOR structs.
FILETIME handling is a bit wacky, but that's what we currently have.
The flags are defined by MS-RDPECLIP 2.2.5.2.3.1 File Descriptor
(CLIPRDR_FILEDESCRIPTOR) as well as by 'File Attribute Constants'
in WinAPI reference [1].
The idea is to delegate FILEDESCRIPTOR format processing to WinPR
instead of cliprdr channel, so move the struct definition there. The
definition used by cliprdr protocol is identical but with some fields
treated as reserved.
The defintions are placed into <winpr/shell.h> as FileGroupDescriptorW
is a shell clipboard format.
Also remove the definition of CLIPRDR_FILELIST. The clients would be
using WinPR to handle the file clipping, so CLIPRDR_FILELIST does not
have to be handled explicitly. The clients will have serialization and
deserialization functions to handle CLIPRDR_FILELIST.
[1]: https://msdn.microsoft.com/en-us/library/windows/desktop/gg258117(v=vs.85).aspx
Since this comes via a Wire-To-Surface-2 PDU we don't have
any left/top/right/bottom destination values.
The current code has always dealt with zeros when updating the
invalid region which resulted in black rectangles.
The correct update region is determined during decompression.
This callback is called when the client capabilities have been received. This callback
appears to be more useful than the Capabilities one that is called just before the server
sends its capabilities.
Since not all H264 decoders support multiple YUV420 output
buffers process H264 decoding and YUV to RGB conversion
sequentially to avoid overriding the input data.
Allow password to be stored in .RDP file and parsed and settings
updated, this will allow for dynamic .RDP files to be created with
complete login credentials, using this method the username, server and
password will no longer be visible within process lists.
Also fixed issue of username and domain being read from .RDP files and
set to null by command line processor.
FreeRDP/client/common/client.c: In function ‘freerdp_client_context_new’:
FreeRDP/client/common/client.c:86:38: warning: passing argument 1 of ‘freerdp_register_addin_provider’ from incompatible pointer type
if (freerdp_register_addin_provider(freerdp_channels_load_static_addin_entry,
FreeRDP/include/freerdp/addin.h:60:17: note: expected ‘FREERDP_LOAD_CHANNEL_ADDIN_ENTRY_FN’ but argument is of type ‘void * (*)(const CHAR *, CHAR *, CHAR *, DWORD)’
FREERDP_API int freerdp_register_addin_provider(
In file included from FreeRDP/client/common/compatibility.c:27:0:
FreeRDP/include/freerdp/addin.h:60:17: note: expected ‘FREERDP_LOAD_CHANNEL_ADDIN_ENTRY_FN’ but argument is of type ‘void * (*)(const CHAR *, CHAR *, CHAR *, DWORD)’
FREERDP_API int freerdp_register_addin_provider(
gcc (Debian 4.9.2-10) 4.9.2
When copying image data consider formats that only differ on use
of alpha data equal. This allows using the optimized copy routine
instead of the slower color conversion routine. Fixes#3616
This PR contains following changes:
- Give rlgr encode/decode APIs a similar interface
- Make rlgr encode API accessible again
- Make it possible to exchange rlgr functions
- Make use of RLGR1/3 defines instead of 0/1 in decoding
This patch make it possible to limit the time that is passed when we call
XXX_check_fds functions. This should smooth the treatment between handling inputs
and handling incoming bitmap updates.
The default maximum time is set to 100 ms.
CMake 2.8 does not support default visibility on windows.
To allow building tests add the FREERDP_LOCAL define for each
function that is internal to FreeRDP.
When build with testing these functions are exported and available
for use by tests.
Global static variables do not work, if more than one instance
of an RDP client is running in the same process space.
Removed the varaibles where possible and replaced them with
thread local storage where necessary.
