589 lines
17 KiB
C++
589 lines
17 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
|
// $Id: memory.cc,v 1.18 2002-08-31 15:35:51 vruppert Exp $
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2001 MandrakeSoft S.A.
|
|
//
|
|
// MandrakeSoft S.A.
|
|
// 43, rue d'Aboukir
|
|
// 75002 Paris - France
|
|
// http://www.linux-mandrake.com/
|
|
// http://www.mandrakesoft.com/
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#include "bochs.h"
|
|
#define LOG_THIS BX_MEM_THIS
|
|
|
|
|
|
#if BX_PROVIDE_CPU_MEMORY
|
|
|
|
void
|
|
BX_MEM_C::write_physical(BX_CPU_C *cpu, Bit32u addr, unsigned len, void *data)
|
|
{
|
|
Bit8u *data_ptr;
|
|
Bit32u a20addr;
|
|
|
|
#if BX_IODEBUG_SUPPORT
|
|
bx_iodebug_c::mem_write( cpu, addr, len, data);
|
|
#endif
|
|
|
|
a20addr = A20ADDR(addr);
|
|
BX_INSTR_PHY_WRITE(a20addr, len);
|
|
|
|
#if BX_FETCHDECODE_CACHE
|
|
// NOTE: This piece should be put, if possible, where a write to the memory
|
|
// takes place.
|
|
// Here it trashes cache even for writes that would end up to ROM
|
|
|
|
// Invalidate instruction cache for written addresses
|
|
// Instructions can be up to 16 bytes long, so I have to trash up to 15 bytes
|
|
// before write address (costly!)
|
|
// I think it would NOT be safe to invalidate up to the last instruction
|
|
// before the write because there COULD be programs which use
|
|
// jump-in-the-middle-of-an-instruction schemes (esp. copyprotection
|
|
// schemes)
|
|
|
|
|
|
Bit32u rpn_start = addr >> 12;
|
|
Bit32u rpn_end = (addr+len-1) >> 12;
|
|
Bit32u rpn = rpn_start;
|
|
for(;rpn<=rpn_end;rpn++) {
|
|
Bit32u rpn_sel = rpn & BX_FDCACHE_RPN_MASK;
|
|
Bit32u old_rpn = cpu->fdcache_rpn[rpn_sel];
|
|
if(rpn==old_rpn) {
|
|
Bit32u index = cpu->fdcache_rpn_start[rpn_sel];
|
|
//FIXME: We shouldn't need to and this with BX_FDCACHE_MASK
|
|
for(;index!=0xFFFFFFFF;index=cpu->fdcache_rpn_list[index & BX_FDCACHE_MASK].next) {
|
|
cpu->fdcache_ip[index] = 0xFFFFFFFF;
|
|
//FIXME: This shouldn't be necessary.
|
|
cpu->fdcache_rpn_list[index].prev = 0xFFFFFFFF;
|
|
}
|
|
cpu->fdcache_rpn[rpn_sel] = 0xFFFFFFFF;
|
|
// cpu->fdcache_rpn_start[rpn_sel] = 0xFFFFFFFF;
|
|
}
|
|
}
|
|
|
|
//unsigned long bx_fdcache_idx = addr - 15;
|
|
//for (int count = 15+len; count > 0; --count) {
|
|
// if (cpu->fdcache_ip[bx_fdcache_idx & BX_FDCACHE_MASK] == bx_fdcache_idx) {
|
|
// cpu->fdcache_ip[bx_fdcache_idx & BX_FDCACHE_MASK] = 0xFFFFFFFF;
|
|
// }
|
|
// ++bx_fdcache_idx;
|
|
//}
|
|
#endif // #if BX_FETCHDECODE_CACHE
|
|
|
|
#if BX_DEBUGGER
|
|
// (mch) Check for physical write break points, TODO
|
|
// (bbd) Each breakpoint should have an associated CPU#, TODO
|
|
for (int i = 0; i < num_write_watchpoints; i++)
|
|
if (write_watchpoint[i] == a20addr) {
|
|
BX_CPU(0)->watchpoint = a20addr;
|
|
BX_CPU(0)->break_point = BREAK_POINT_WRITE;
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
|
|
if ( (a20addr + len) <= BX_MEM_THIS len ) {
|
|
// all of data is within limits of physical memory
|
|
if ( (a20addr & 0xfff80000) != 0x00080000 ) {
|
|
if (len == 4) {
|
|
if ((a20addr & 0x00000003) == 0) {
|
|
// write 4byte data to aligned memory location
|
|
Bit32u data32;
|
|
|
|
data32 = * (Bit32u *) data;
|
|
#ifdef BX_BIG_ENDIAN
|
|
data32 = (data32 << 24) | (data32 >> 24) |
|
|
((data32&0x00ff0000)>>8) | ((data32&0x0000ff00)<<8);
|
|
#endif
|
|
* ((Bit32u *) (&vector[a20addr])) = data32;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
return;
|
|
}
|
|
else {
|
|
Bit32u data32;
|
|
|
|
data32 = * (Bit32u *) data;
|
|
* ((Bit8u *) (&vector[a20addr])) = data32; data32 >>= 8;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
* ((Bit8u *) (&vector[A20ADDR(addr+1)])) = data32; data32 >>= 8;
|
|
* ((Bit8u *) (&vector[A20ADDR(addr+2)])) = data32; data32 >>= 8;
|
|
* ((Bit8u *) (&vector[A20ADDR(addr+3)])) = data32;
|
|
// worst case, last byte is in different page; possible extra dirty page
|
|
BX_DBG_DIRTY_PAGE(A20ADDR(addr+3) >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
return;
|
|
}
|
|
}
|
|
if (len == 2) {
|
|
if ((a20addr & 0x00000001) == 0) {
|
|
// write 2-byte data to aligned memory location
|
|
Bit16u data16;
|
|
|
|
data16 = * (Bit16u *) data;
|
|
#ifdef BX_BIG_ENDIAN
|
|
data16 = (data16 >> 8) | (data16 << 8);
|
|
#endif
|
|
* ((Bit16u *) (&vector[a20addr])) = data16;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
return;
|
|
}
|
|
else {
|
|
Bit16u data16;
|
|
|
|
data16 = * (Bit16u *) data;
|
|
* ((Bit8u *) (&vector[a20addr])) = (Bit8u) data16;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
* ((Bit8u *) (&vector[A20ADDR(a20addr+1)])) = (data16 >> 8);
|
|
BX_DBG_DIRTY_PAGE(A20ADDR(a20addr+1) >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
return;
|
|
}
|
|
}
|
|
if (len == 1) {
|
|
Bit8u data8;
|
|
|
|
data8 = * (Bit8u *) data;
|
|
* ((Bit8u *) (&vector[a20addr])) = data8;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
return;
|
|
}
|
|
// len == 3 case can just fall thru to special cases handling
|
|
}
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr = (Bit8u *) data;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr = (Bit8u *) data + (len - 1);
|
|
#endif
|
|
|
|
write_one:
|
|
if ( (a20addr & 0xfff80000) != 0x00080000 ) {
|
|
// addr *not* in range 00080000 .. 000FFFFF
|
|
vector[a20addr] = *data_ptr;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
inc_one:
|
|
if (len == 1) return;
|
|
len--;
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
goto write_one;
|
|
}
|
|
|
|
// addr in range 00080000 .. 000FFFFF
|
|
|
|
if (a20addr <= 0x0009ffff) {
|
|
// regular memory 80000 .. 9FFFF
|
|
vector[a20addr] = *data_ptr;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
goto inc_one;
|
|
}
|
|
if (a20addr <= 0x000bffff) {
|
|
// VGA memory A0000 .. BFFFF
|
|
BX_VGA_MEM_WRITE(a20addr, *data_ptr);
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DBG_UCMEM_REPORT(a20addr, 1, BX_WRITE, *data_ptr); // obsolete
|
|
goto inc_one;
|
|
}
|
|
// adapter ROM C0000 .. DFFFF
|
|
// ROM BIOS memory E0000 .. FFFFF
|
|
// (ignore write)
|
|
//BX_INFO(("ROM lock %08x: len=%u",
|
|
// (unsigned) a20addr, (unsigned) len));
|
|
#if BX_PCI_SUPPORT == 0
|
|
#if BX_SHADOW_RAM
|
|
// Write it since its in shadow RAM
|
|
vector[a20addr] = *data_ptr;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
#else
|
|
// ignore write to ROM
|
|
#endif
|
|
#else
|
|
// Write Based on 440fx Programming
|
|
if (bx_options.Oi440FXSupport->get () &&
|
|
((a20addr >= 0xC0000) && (a20addr <= 0xFFFFF))) {
|
|
switch (bx_devices.pci->wr_memType(a20addr & 0xFC000)) {
|
|
case 0x1: // Writes to ShadowRAM
|
|
// BX_INFO(("Writing to ShadowRAM %08x, len %u ! ", (unsigned) a20addr, (unsigned) len));
|
|
shadow[a20addr - 0xc0000] = *data_ptr;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
goto inc_one;
|
|
|
|
case 0x0: // Writes to ROM, Inhibit
|
|
BX_DEBUG(("Write to ROM ignored: address %08x, data %02x", (unsigned) a20addr, *data_ptr));
|
|
goto inc_one;
|
|
default:
|
|
BX_PANIC(("write_physical: default case"));
|
|
goto inc_one;
|
|
}
|
|
}
|
|
#endif
|
|
goto inc_one;
|
|
}
|
|
|
|
else {
|
|
// some or all of data is outside limits of physical memory
|
|
unsigned i;
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr = (Bit8u *) data;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr = (Bit8u *) data + (len - 1);
|
|
#endif
|
|
|
|
|
|
#if BX_SUPPORT_VBE
|
|
// Check VBE LFB support
|
|
|
|
if (a20addr >= VBE_DISPI_LFB_PHYSICAL_ADDRESS)
|
|
{
|
|
for (i = 0; i < len; i++) {
|
|
// FIXME: check for max VBE video memory size
|
|
|
|
//if (a20addr < BX_MEM_THIS len) {
|
|
//vector[a20addr] = *data_ptr;
|
|
//BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
//BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
BX_VGA_MEM_WRITE(a20addr, *data_ptr);
|
|
// }
|
|
|
|
// otherwise ignore byte, since it overruns memory
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
}
|
|
return;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
#if BX_SUPPORT_APIC
|
|
bx_generic_apic_c *local_apic = &cpu->local_apic;
|
|
bx_generic_apic_c *ioapic = bx_devices.ioapic;
|
|
if (local_apic->is_selected (a20addr, len)) {
|
|
local_apic->write (a20addr, (Bit32u *)data, len);
|
|
return;
|
|
} else if (ioapic->is_selected (a20addr, len)) {
|
|
ioapic->write (a20addr, (Bit32u *)data, len);
|
|
return;
|
|
}
|
|
else
|
|
#endif
|
|
for (i = 0; i < len; i++) {
|
|
if (a20addr < BX_MEM_THIS len) {
|
|
vector[a20addr] = *data_ptr;
|
|
BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
}
|
|
// otherwise ignore byte, since it overruns memory
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
|
|
void
|
|
BX_MEM_C::read_physical(BX_CPU_C *cpu, Bit32u addr, unsigned len, void *data)
|
|
{
|
|
Bit8u *data_ptr;
|
|
Bit32u a20addr;
|
|
|
|
#if BX_IODEBUG_SUPPORT
|
|
bx_iodebug_c::mem_read( cpu, addr, len, data);
|
|
#endif
|
|
|
|
|
|
a20addr = A20ADDR(addr);
|
|
BX_INSTR_PHY_READ(a20addr, len);
|
|
|
|
#if BX_DEBUGGER
|
|
// (mch) Check for physical read break points, TODO
|
|
// (bbd) Each breakpoint should have an associated CPU#, TODO
|
|
for (int i = 0; i < num_read_watchpoints; i++)
|
|
if (read_watchpoint[i] == a20addr) {
|
|
BX_CPU(0)->watchpoint = a20addr;
|
|
BX_CPU(0)->break_point = BREAK_POINT_READ;
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
if ( (a20addr + len) <= BX_MEM_THIS len ) {
|
|
// all of data is within limits of physical memory
|
|
if ( (a20addr & 0xfff80000) != 0x00080000 ) {
|
|
if (len == 4) {
|
|
if ((a20addr & 0x00000003) == 0) {
|
|
// read 4-byte data from aligned memory location
|
|
Bit32u data32;
|
|
|
|
data32 = * ((Bit32u *) (&vector[a20addr]));
|
|
#ifdef BX_BIG_ENDIAN
|
|
data32 = (data32 << 24) | (data32 >> 24) |
|
|
((data32&0x00ff0000)>>8) | ((data32&0x0000ff00)<<8);
|
|
#endif
|
|
* (Bit32u *) data = data32;
|
|
return;
|
|
}
|
|
else {
|
|
Bit32u data32;
|
|
|
|
data32 = * ((Bit8u *) (&vector[A20ADDR(addr+3)])); data32 <<= 8;
|
|
data32 |= * ((Bit8u *) (&vector[A20ADDR(addr+2)])); data32 <<= 8;
|
|
data32 |= * ((Bit8u *) (&vector[A20ADDR(addr+1)])); data32 <<= 8;
|
|
data32 |= * ((Bit8u *) (&vector[a20addr]));
|
|
|
|
* (Bit32u *) data = data32;
|
|
return;
|
|
}
|
|
}
|
|
if (len == 2) {
|
|
if ((a20addr & 0x00000001) == 0) {
|
|
// read 2-byte data from aligned memory location
|
|
Bit16u data16;
|
|
|
|
data16 = * ((Bit16u *) (&vector[a20addr]));
|
|
#ifdef BX_BIG_ENDIAN
|
|
data16 = (data16 >> 8) | (data16 << 8);
|
|
#endif
|
|
|
|
* (Bit16u *) data = data16;
|
|
return;
|
|
}
|
|
else {
|
|
Bit16u data16;
|
|
|
|
data16 = * ((Bit8u *) (&vector[A20ADDR(addr+1)])); data16 <<= 8;
|
|
data16 |= * ((Bit8u *) (&vector[a20addr]));
|
|
|
|
* (Bit16u *) data = data16;
|
|
return;
|
|
}
|
|
}
|
|
if (len == 1) {
|
|
Bit8u data8;
|
|
|
|
data8 = * ((Bit8u *) (&vector[a20addr]));
|
|
* (Bit8u *) data = data8;
|
|
return;
|
|
}
|
|
// len == 3 case can just fall thru to special cases handling
|
|
}
|
|
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr = (Bit8u *) data;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr = (Bit8u *) data + (len - 1);
|
|
#endif
|
|
|
|
|
|
|
|
read_one:
|
|
if ( (a20addr & 0xfff80000) != 0x00080000 ) {
|
|
// addr *not* in range 00080000 .. 000FFFFF
|
|
*data_ptr = vector[a20addr];
|
|
inc_one:
|
|
if (len == 1) return;
|
|
len--;
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
goto read_one;
|
|
}
|
|
|
|
// addr in range 00080000 .. 000FFFFF
|
|
#if BX_PCI_SUPPORT == 0
|
|
if ((a20addr <= 0x0009ffff) || (a20addr >= 0x000c0000) ) {
|
|
// regular memory 80000 .. 9FFFF, C0000 .. F0000
|
|
*data_ptr = vector[a20addr];
|
|
goto inc_one;
|
|
}
|
|
// VGA memory A0000 .. BFFFF
|
|
*data_ptr = BX_VGA_MEM_READ(a20addr);
|
|
BX_DBG_UCMEM_REPORT(a20addr, 1, BX_READ, *data_ptr); // obsolete
|
|
goto inc_one;
|
|
#else // #if BX_PCI_SUPPORT == 0
|
|
if (a20addr <= 0x0009ffff) {
|
|
*data_ptr = vector[a20addr];
|
|
goto inc_one;
|
|
}
|
|
if (a20addr <= 0x000BFFFF) {
|
|
// VGA memory A0000 .. BFFFF
|
|
*data_ptr = BX_VGA_MEM_READ(a20addr);
|
|
BX_DBG_UCMEM_REPORT(a20addr, 1, BX_READ, *data_ptr);
|
|
goto inc_one;
|
|
}
|
|
|
|
// a20addr in C0000 .. FFFFF
|
|
if (!bx_options.Oi440FXSupport->get ()) {
|
|
*data_ptr = vector[a20addr];
|
|
goto inc_one;
|
|
}
|
|
else {
|
|
switch (bx_devices.pci->rd_memType(a20addr & 0xFC000)) {
|
|
case 0x1: // Read from ShadowRAM
|
|
*data_ptr = shadow[a20addr - 0xc0000];
|
|
BX_INFO(("Reading from ShadowRAM %08x, Data %02x ", (unsigned) a20addr, *data_ptr));
|
|
goto inc_one;
|
|
|
|
case 0x0: // Read from ROM
|
|
*data_ptr = vector[a20addr];
|
|
//BX_INFO(("Reading from ROM %08x, Data %02x ", (unsigned) a20addr, *data_ptr));
|
|
goto inc_one;
|
|
default:
|
|
BX_PANIC(("::read_physical: default case"));
|
|
}
|
|
}
|
|
goto inc_one;
|
|
#endif // #if BX_PCI_SUPPORT == 0
|
|
}
|
|
else {
|
|
// some or all of data is outside limits of physical memory
|
|
unsigned i;
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr = (Bit8u *) data;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr = (Bit8u *) data + (len - 1);
|
|
#endif
|
|
|
|
#if BX_SUPPORT_VBE
|
|
// Check VBE LFB support
|
|
|
|
if (a20addr >= VBE_DISPI_LFB_PHYSICAL_ADDRESS)
|
|
{
|
|
for (i = 0; i < len; i++) {
|
|
// FIXME: check for max VBE video memory size
|
|
|
|
//if (a20addr < BX_MEM_THIS len) {
|
|
//vector[a20addr] = *data_ptr;
|
|
//BX_DBG_DIRTY_PAGE(a20addr >> 12);
|
|
//BX_DYN_DIRTY_PAGE(a20addr >> 12);
|
|
*data_ptr = BX_VGA_MEM_READ(a20addr);
|
|
// }
|
|
|
|
// otherwise ignore byte, since it overruns memory
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
}
|
|
return;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
#if BX_SUPPORT_APIC
|
|
bx_generic_apic_c *local_apic = &cpu->local_apic;
|
|
bx_generic_apic_c *ioapic = bx_devices.ioapic;
|
|
if (local_apic->is_selected (addr, len)) {
|
|
local_apic->read (addr, data, len);
|
|
return;
|
|
} else if (ioapic->is_selected (addr, len)) {
|
|
ioapic->read (addr, data, len);
|
|
return;
|
|
}
|
|
#endif
|
|
for (i = 0; i < len; i++) {
|
|
#if BX_PCI_SUPPORT == 0
|
|
if (a20addr < BX_MEM_THIS len)
|
|
*data_ptr = vector[a20addr];
|
|
else
|
|
*data_ptr = 0xff;
|
|
#else // BX_PCI_SUPPORT == 0
|
|
if (a20addr < BX_MEM_THIS len) {
|
|
if ((a20addr >= 0x000C0000) && (a20addr <= 0x000FFFFF)) {
|
|
if (!bx_options.Oi440FXSupport->get ())
|
|
*data_ptr = vector[a20addr];
|
|
else {
|
|
switch (bx_devices.pci->rd_memType(a20addr & 0xFC000)) {
|
|
case 0x0: // Read from ROM
|
|
*data_ptr = vector[a20addr];
|
|
//BX_INFO(("Reading from ROM %08x, Data %02x ", (unsigned) a20addr, *data_ptr));
|
|
break;
|
|
|
|
case 0x1: // Read from Shadow RAM
|
|
*data_ptr = shadow[a20addr - 0xc0000];
|
|
BX_INFO(("Reading from ShadowRAM %08x, Data %02x ", (unsigned) a20addr, *data_ptr));
|
|
break;
|
|
default:
|
|
BX_PANIC(("read_physical: default case"));
|
|
} // Switch
|
|
}
|
|
}
|
|
else {
|
|
*data_ptr = vector[a20addr];
|
|
BX_INFO(("Reading from Norm %08x, Data %02x ", (unsigned) a20addr, *data_ptr));
|
|
}
|
|
}
|
|
else
|
|
*data_ptr = 0xff;
|
|
#endif // BX_PCI_SUPPORT == 0
|
|
addr++;
|
|
a20addr = A20ADDR(addr);
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
data_ptr++;
|
|
#else // BX_BIG_ENDIAN
|
|
data_ptr--;
|
|
#endif
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
#endif // #if BX_PROVIDE_CPU_MEMORY
|