- don't init / reset Cirrus extension if disabled
- store last active BPP value independent from selected vga extension (fixes possible
panic when switching from a Cirrus 640x480 mode to standard VGA)
#1159639)
- size of text snapshot space increased to 128 kByte (for all memory mappings)
- immediately return after the panic when the number of text lines is too large
to avoid segfault
- changes to the original svga_cirrus patch:
* PCI memory/mmio PnP support, some emulation and compile fixes
* ported write mode 4 + 5 and some bufixes from cirrus vga in qemu
* new graphics API, hardware cursor support, configure option added (Robin Kay)
* partial support for transparent bitblt and bitblt write mask
memory handling in memory.cc removed)
- CRTC write protection implemented
- 16-bit read access to some VGA registers added
- memory handler code now conciders the status of the A20 line
and bpp (done for the x display library)
- new switch VBE_DISPI_GETCAPS. The xres, yres and bpp registers return the gui
capabilities if enabled.
- VBE_DISPI_ID3 defined
- don't clear the VBE memory if the new flag VBE_DISPI_NOCLEARMEM is set
- vbe_bpp_multiplier for the 4bpp mode set to 1 (usually unused, but this value is save)
- maximum number of text lines changed to 100 (CGA "graphics" mode 160x100)
- size of text snapshot buffer changed to 32k (size of MDA/CGA text memory)
- removed obsolete macro CGA_TEXT_ADDR()
ATTENTION: the Elpin VGA BIOS uses a delay of 280 vertical retraces after
displaying the copyright text
- changes to the horizontal or vertical pel panning registers force a redraw of
the screen
- screen update problems in text mode fixed
- sort order of the CRT register write cases changed
If set, the screen size will be horizontally doubled in CGA and standard
VGA modes.
- doublescan feature for CGA mode 320x200x4 added
- removed trailing spaces in VBE update code
the address offset between two lines on the screen in all VGA modes.
It depends on the CRTC offset register value and the address mode (byte, word,
dword)
- moved screen update code to the end of the write handler. If a register change
should force a redraw of the screen, the variable 'needs_update' must be set
to 1.
- changes to the attribute controller palette index register now force a redraw
of the screen
- modeX: calculation of the tile numbers fixed
- clear tile array when switching to graphics mode, clear text snapshot when
switching to text mode, do the same when changing the palette or disable video
- simplified the function determine_screen_dimensions()
- fixed the code for the CGA mode 640x200x2 in update() and mem_write()
- it works only on x86 with gcc2.95+
- uses the GCC function atribute "regparm(n)" to declare that certain
functions use the register calling convention
- performance improvement is about 6%
palette - it's an index to the attribute controller palette index.
The new function get_actl_palette_idx() now returns the real DAC index.
The guis sdl, wx and x11 are using the new function. TODO: Fix this bug in
all other guis.
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
- default value of the sequencer reset bits is 1 (no reset)
- sequencer reset flag 1 resets the charmap select register when cleared
- skip the screen update when the sequencer is in reset mode (h/v sync and
video ram refresh are disabled in that case)
- don't clear the memory update flag before the update is done
- skip the text screen update when the character height is set to 1 (MSL = 0)
- sequencer debug messages updated
set_text_charbyte()
- vga: store the address of the active charmap in the new variable
charmap_address
- vga: text mode hack removed. The write modes, operations and masks must be
used in text mode too.
- sdl: clear_screen() is not necessary when the charmap has changed
- win32: update only the changed font bitmaps before drawing the text
Some devices already had one. Some I had to add an empty one.
I did a little cleaning of init() methods to make them more uniform
but generally I left them alone.
- I also put these exact diffs into a patch "patch.iodev-add-reset"
in case I want to revert these changes for some reason, for example
if they break an old patch. It should be deleted after a while.
To see the commit logs for this use either cvsweb or
cvs update -r BRANCH-io-cleanup and then 'cvs log' the various files.
In general this provides a generic interface for logging.
logfunctions:: is a class that is inherited by some classes, and also
. allocated as a standalone global called 'genlog'. All logging uses
. one of the ::info(), ::error(), ::ldebug(), ::panic() methods of this
. class through 'BX_INFO(), BX_ERROR(), BX_DEBUG(), BX_PANIC()' macros
. respectively.
.
. An example usage:
. BX_INFO(("Hello, World!\n"));
iofunctions:: is a class that is allocated once by default, and assigned
as the iofunction of each logfunctions instance. It is this class that
maintains the file descriptor and other output related code, at this
point using vfprintf(). At some future point, someone may choose to
write a gui 'console' for bochs to which messages would be redirected
simply by assigning a different iofunction class to the various logfunctions
objects.
More cleanup is coming, but this works for now. If you want to see alot
of debugging output, in main.cc, change onoff[LOGLEV_DEBUG]=0 to =1.
Comments, bugs, flames, to me: todd@fries.net
