- the "remaplist" has 256 entries, but the limit was too high (4096).
- the "patchtable" had 4096 entries, but the index was never > 15.
- removed disabled / outdated code.
- OPL3: apply FM volume control to the output data.
- SB16: fixed missing volume update after mixer reset.
- soundlow: fixed application of the volume control to the PCM output.
- sound 'file' driver: added failure handling in the file open methods.
- soundmod: initialize default driver with NULL to avoid crash on failure.
- SB16: Fixed crash if no driver is present / removed unused members.
- Implemented wave and midi output using the 'soundfile' driver.
- Implemented dual midi/wave output in midimode/wavemode 3.
- Removed now obsolete output file handling and other cleanups.
- The wave input (recording) and OPL3 output features are not affected by
the wavemode setting.
- TODO: Similar rewrite of ES1370 wave output and related cleanups.
- Added the capability to load up to 4 sound drivers and added methods to
get pointers to the waveout, wavein and midiout services of a driver.
- Rewrite of the SB16 midi file output code. In midimode 2 and 3 the midiout
service of the 'file' driver is used. Removed obsolete midi file handling.
- Re-implemented the closemidioutput() method to make runtime changes of the
midi setup work with the new code.
- waveout: added support for RIFF WAVE format and raw output. The formats
'voc' and 'wav' are detected by file extension, raw output is used otherwise.
- midiout: added support for raw midi output (no header, no deltatime).
The 'mid' format is detected by file extension, raw output is used otherwise.
- Added 'midiout' parameter to the global sound option to specify the device
if necessary. The related SB16 parameter now only specifies the output file.
- TODO: Rewrite of the sound configuration and output code to support dual
output (device and file).
creates the object and returns a pointer to it. TODO: Rewrite of the sound
configuration to support a more detailed setup (e.g. waveout with alsa,
dummy wavein, midiout to a file).
creates the object and returns a pointer to it. TODO: The wavein and midiout
components should also move to separate classes. When finished, it should be
possible to configure the sound support more detailed (e.g. waveout with sdl,
midiout with alsa and the dummy driver for wavein). Creating a separate
module for the output to file(s) is also possible.
- OPL3: Added support to change the samplerate of the generator.
- SDL sound: convert wave packet to 16 Bit signed stereo format.
- Increased the maximum size of a single wave packet for playbck/recording.
The code currently only works with the SDL sound output module and at 44100 Hz,
with 16 bit stereo signed little endian format. FM volume control and
save/restore support are not implemented yet. The legacy code for generating
MIDI notes still works and will be removed when mixing support is implemented
in all sound modules.
- Define new structure bx_pcm_param_t and use it as a parameter for the method
sendwavepacket(). The method startwavepacket() is now called from
sendwavepacket() in case of a parameter change (temporary solution).
- soundsdl: Replaced waveready() call by some more accurate code for buffer
space check in sendwavepacket().
- soundsdl: Moved code for reading from audio buffer to a new function.
- soundsdl: Temporarily increase the audio buffer size.
- Preparing the SB16 code for the OPL emulation port from DOSBox.
- Reworked wave callback code to support 2 input sources (no mixing yet).
- Fixed SDL sound output.
- Beep generator fixes.
- Prepared the SB16 code for FM OPL output support (to be ported from DOSBox).
- Renamed wavedata callback type.
- Handle sample rate in the beep generator (TODO: handle data format).
- Don't call waveready() in the SB16 code.
- Attempt to fix SDL2 wave output using SDL_LockAudio() / SDL_UnlockAudio().
- SDL specific code in the beep thread no longer needed.
- Increment timer counter before checking for overflow.
- Implemented ISA bus delay in the pc_system code and use it for the SB16.
This makes OPL chip detection work at ips values > 4 Mips.
TODO: OPL chip should use wave output instead of MIDI (maybe port from DOSBox).
TODO: Use isa_bus_delay() for other legacy devices if required.
usb device plugins. Loading the plugin means that the user wants to enable it.
Disabling the device on the command line and in the config interface is still
possible.
- ES1370: implemented CODEC registers (AK4531 mixer) and wave volume control
- Moved wave volume application code to new method pcm_apply_volume() and use
it for both soundcards
- TODO: stereo support
- SB16: log file name now also available as a runtime option
- SB16: changed order of the runtime options and minor other changes
- ES1370: changed the "wavemode" parameter type to bx_param_enum_c and set up
more accurate dependencies (similar to SB16)
- ES1370: wave mode and file name now available as a runtime option
- If the runtime flag of a bx_list_c object is set, all it's items are set up
as runtime options.
- Set the runtime parameter for all top-level runtime-only lists. Setting up
each single parameter is no longer needed.
- Always initialize the lowlevel sound driver (for wave input / recording)
- Wave input (recording) is now independent from the wave output mode
- Changed the "wavemode" parameter type to bx_param_enum_c and set up more
accurate dependencies
- Minor related changes
- ALSA stuff moved from soundlnx.* to new soundalsa.* files
- SB16 / ES1370: including specific sound driver headers not necessary
- updated dependencies
- added parameters 'wavemode' and 'wavefile' to the 'es1370' option
- ES1370: added new method sendwavepacket() (similar to SB16)
- moved VOC file methods from sb16.cc to soundmod.cc and added macros for them
- SB16: minor fixes
