rulimine/STIVALE.md

stivale boot protocol specification

The stivale boot protocol aims to be a simple to implement protocol which provides the kernel with most of the features one may need in a modern x86_64 context.

General information

In order to have a stivale compliant kernel, one must have a kernel executable in the elf64 format and have a .stivalehdr section (described below). Other executable formats are not supported.

stivale natively supports and encourages higher half kernels. The kernel can load itself at 0xffffffff80100000 (as defined in the linker script) and the bootloader will take care of everything, no AT linker script directives needed.

If the kernel loads itself in the lower half (0x100000 or higher), the bootloader will not perform the higher half relocation.

The kernel MUST NOT overwrite anything below 0x100000 (physical memory) as that is where the bootloader memory structures reside. Once the kernel is DONE depending on the bootloader (for page tables, structures, ...) then these areas can be reclaimed if one wants.

The kernel MUST NOT request to load itself at an address lower than 0x100000 (or 0xffffffff80100000 for higher half kernels) for the same reasons as above.

Kernel entry machine state

rip will be the entry point as defined in the ELF file.

At entry, the bootloader will have setup paging such that there is a 4GiB identity mapped block of memory at 0x0000000000000000, a 2GiB mapped area of memory that maps from 0x0000000000000000 physical to 0x0000000080000000 physical to 0xffffffff80000000 virtual. This area is for the higher half kernels. Further more, a 4GiB area of memory from 0x0000000000000000 physical to 0x0000000100000000 physical to 0xffff800000000000 virtual is mapped.

The kernel should NOT modify the bootloader page tables, and it should only use them to bootstrap its own virtual memory manager and its own page tables.

At entry all segment registers are loaded as 64 bit code/data segments, limits and bases are ignored since this is Long Mode.

DO NOT reload segment registers or rely on the provided GDT. The kernel MUST load its own GDT as soon as possible and not rely on the bootloader's.

The IDT is in an undefined state. Kernel must load its own.

IF flag, VM flag, and direction flag are cleared on entry. Other flags undefined.

PG is enabled (cr0), PE is enabled (cr0), PAE is enabled (cr4), LME is enabled (EFER).

The A20 gate is enabled.

rsp is set to the requested stack as per stivale header.

rdi will point to the stivale structure (described below).

stivale header (.stivalehdr)

The kernel executable shall have a section .stivalehdr which will contain the header that the bootloader will parse.

Said header looks like this:

struct stivale_header {
    uint64_t stack;   // This is the stack address which will be in RSP
                      // when the kernel is loaded.

    uint16_t flags;   // Flags
                      // bit 0   0 = text mode,   1 = graphics mode
                      // All other bits undefined.

    uint16_t framebuffer_width;   // These 3 values are parsed if a graphics mode
    uint16_t framebuffer_height;  // is requested. If all values are set to 0
    uint16_t framebuffer_bpp;     // then the bootloader will pick the best possible
                                  // video mode automatically (recommended).
} __attribute__((packed));

stivale structure

The stivale structure returned by the bootloader looks like this:

struct stivale_struct {
    uint64_t cmdline;               // Pointer to a null-terminated cmdline
    uint64_t memory_map_addr;       // Pointer to the memory map (entries described below)
    uint64_t memory_map_entries;    // Count of memory map entries
    uint64_t framebuffer_addr;      // Address of the framebuffer and related info
    uint16_t framebuffer_pitch;
    uint16_t framebuffer_width;
    uint16_t framebuffer_height;
    uint16_t framebuffer_bpp;
    uint64_t rsdp;                  // Pointer to the ACPI RSDP structure
    uint64_t module_count;          // Count of modules that stivale loaded according to config
    uint64_t modules;               // Pointer to the first entry in the linked list of modules (described below)
} __attribute__((packed));

Memory map entry

struct mmap_entry {
    uint64_t base;      // Base of the memory section
    uint64_t length;    // Length of the section
    uint32_t type;      // Type (described below)
    uint32_t unused;
} __attribute__((packed));

type is an enumeration that can have the following values:

1. Usable RAM
2. Reserved
3. ACPI reclaimable
4. ACPI NVS
5. Bad memory

All other values are undefined.

Modules

The modules variable points to the first entry of the linked list of module structures. A module structure looks like this:

struct stivale_module {
    uint64_t begin;         // Address where the module is loaded
    uint64_t end;           // End address of the module
    char     string[128];   // String passed to the module (by config file)
    uint64_t next;          // Pointer to the next module (if any), check module_count
                            // in the stivale_struct
} __attribute__((packed));