8.3 KiB
stivale boot protocol specification
The stivale boot protocol aims to be a simple to implement protocol which provides the kernel with most of the features one may need in a modern x86_64 context (although 32-bit x86 is also supported).
General information
In order to have a stivale compliant kernel, one must have a kernel executable
in the elf64 or elf32 format and have a .stivalehdr section (described below).
Other executable formats are not supported.
stivale will recognise whether the ELF file is 32-bit or 64-bit and load the kernel into the appropriate CPU mode.
stivale natively supports (only for 64-bit kernels) and encourages higher half kernels.
The kernel can load itself at 0xffffffff80100000 (as defined in the linker script)
and the bootloader will take care of everything, no AT linker script directives needed.
If the kernel loads itself in the lower half (0x100000 or higher), the bootloader
will not perform the higher half relocation.
The kernel MUST NOT overwrite anything below 0x100000 (physical memory) as that
is where the bootloader memory structures reside.
Once the kernel is DONE depending on the bootloader (for page tables, structures, ...)
then these areas can be reclaimed if one wants.
The kernel MUST NOT request to load itself at an address lower than 0x100000
(or 0xffffffff80100000 for higher half kernels) for the same reasons as above.
Kernel entry machine state
64-bit kernel
rip will be the entry point as defined in the ELF file, unless the entry_point
field in the stivale header is set to a non-0 value, in which case, it is set to
the value of entry_point.
At entry, the bootloader will have setup paging mappings as such:
Base Physical Address - Size -> Virtual address
0x0000000000000000 - 4 GiB plus any additional memory map entry -> 0x0000000000000000
0x0000000000000000 - 4 GiB plus any additional memory map entry -> 0xffff800000000000 (4-level paging only)
0x0000000000000000 - 4 GiB plus any additional memory map entry -> 0xff00000000000000 (5-level paging only)
0x0000000000000000 - 0x80000000 -> 0xffffffff80000000
If the kernel is dynamic and not statically linked, the bootloader will relocate it. Furthermore if bit 2 of the flags field in the stivale header is set, the bootloader will perform kernel address space layout randomisation (KASLR).
The kernel should NOT modify the bootloader page tables, and it should only use them to bootstrap its own virtual memory manager and its own page tables.
At entry all segment registers are loaded as 64 bit code/data segments, limits and bases are ignored since this is Long Mode.
DO NOT reload segment registers or rely on the provided GDT. The kernel MUST load its own GDT as soon as possible and not rely on the bootloader's.
The IDT is in an undefined state. Kernel must load its own.
IF flag, VM flag, and direction flag are cleared on entry. Other flags undefined.
PG is enabled (cr0), PE is enabled (cr0), PAE is enabled (cr4),
LME is enabled (EFER).
If stivale header flag bit 1 is set, then, if available, 5-level paging is enabled
(LA57 bit in cr4).
The A20 gate is enabled.
PIC/APIC IRQs are all masked.
rsp is set to the requested stack as per stivale header.
rdi will point to the stivale structure (described below).
All other general purpose registers are set to 0.
32-bit kernel
eip will be the entry point as defined in the ELF file, unless the entry_point
field in the stivale header is set to a non-0 value, in which case, it is set to
the value of entry_point.
At entry all segment registers are loaded as 32 bit code/data segments.
All segment bases are 0x00000000 and all limits are 0xffffffff.
DO NOT reload segment registers or rely on the provided GDT. The kernel MUST load its own GDT as soon as possible and not rely on the bootloader's.
The IDT is in an undefined state. Kernel must load its own.
IF flag, VM flag, and direction flag are cleared on entry. Other flags undefined.
PE is enabled (cr0).
The A20 gate is enabled.
PIC/APIC IRQs are all masked.
esp is set to the requested stack as per stivale header.
A pointer to the stivale structure (described below) is pushed onto this stack before the entry point is called.
All other general purpose registers are set to 0.
stivale header (.stivalehdr)
The kernel executable shall have a section .stivalehdr which will contain
the header that the bootloader will parse.
Said header looks like this:
struct stivale_header {
uint64_t stack; // This is the stack address which will be in RSP
// when the kernel is loaded.
uint16_t flags; // Flags
// bit 0 0 = text mode, 1 = graphics framebuffer mode
// bit 1 0 = 4-level paging, 1 = use 5-level paging (if
available)
Ignored if booting a 32-bit kernel.
// bit 2 0 = Disable KASLR, 1 = enable KASLR (up to 1GB slide)
Ignored if booting a 32-bit or non-relocatable kernel
// All other bits undefined.
uint16_t framebuffer_width; // These 3 values are parsed if a graphics mode
uint16_t framebuffer_height; // is requested. If all values are set to 0
uint16_t framebuffer_bpp; // then the bootloader will pick the best possible
// video mode automatically (recommended).
uint64_t entry_point; // If not 0, this field will be jumped to at entry
// instead of the ELF entry point.
} __attribute__((packed));
stivale structure
The stivale structure returned by the bootloader looks like this:
struct stivale_struct {
uint64_t cmdline; // Pointer to a null-terminated cmdline
uint64_t memory_map_addr; // Pointer to the memory map (entries described below)
uint64_t memory_map_entries; // Count of memory map entries
uint64_t framebuffer_addr; // Address of the framebuffer and related info
uint16_t framebuffer_pitch;
uint16_t framebuffer_width;
uint16_t framebuffer_height;
uint16_t framebuffer_bpp;
uint64_t rsdp; // Pointer to the ACPI RSDP structure
uint64_t module_count; // Count of modules that stivale loaded according to config
uint64_t modules; // Pointer to the first entry in the linked list of modules (described below)
uint64_t epoch; // UNIX epoch at boot, read from system RTC
uint64_t flags; // Flags
// bit 0: 1 if booted with BIOS, 0 if booted with UEFI
// All other bits undefined.
} __attribute__((packed));
Memory map entry
struct mmap_entry {
uint64_t base; // Base of the memory section
uint64_t length; // Length of the section
uint32_t type; // Type (described below)
uint32_t unused;
} __attribute__((packed));
type is an enumeration that can have the following values:
1 - Usable RAM
2 - Reserved
3 - ACPI reclaimable
4 - ACPI NVS
5 - Bad memory
10 - Kernel/Modules
All other values are undefined.
The kernel and modules loaded are not marked as usable memory. They are marked as Kernel/Modules (type 10).
Usable RAM chunks are guaranteed to be 4096 byte aligned for both base and length.
The entries are guaranteed to be sorted by base address, lowest to highest.
Usable RAM chunks are guaranteed not to overlap with any other entry.
To the contrary, all non-usable RAM chunks are not guaranteed any alignment, nor is it guaranteed that they do not overlap each other (except usable RAM).
Modules
The modules variable points to the first entry of the linked list of module
structures.
A module structure looks like this:
struct stivale_module {
uint64_t begin; // Address where the module is loaded
uint64_t end; // End address of the module
char string[128]; // String passed to the module (by config file)
uint64_t next; // Pointer to the next module (if any), check module_count
// in the stivale_struct
} __attribute__((packed));