DriveSetup

DriveSetup jest narzędziem do tworzenia, usuwania i formatowania partycji. Obecnie nie potrafi przesuwać partycji ani zmieniać ich rozmiaru, więc do pracy potrzebny jest nierozpartycjonowany nośnik (np. zewnętrzny napęd USB lub inny dysk twardy). W innym razie należy użyć narzędzia takiego jak GParted LiveCD, aby przygotować miejsce dla kolejnej partycji.

At the top is a graphical representation of all partitions inside the device chosen in the list below it. Each device, by default, can hold a maximum of 4 primary partitions. This limit can be removed by making one of those an extended partition, which in turn can hold theoretically an unlimited number of logical partitions (practical limitations depend on, for example, other OSes installed).
You may have to expand such a list with the +/- widget that appears in that case in front of that device to see the details of every logical partition.

Colors and icons provide some more information about the available volumes and partitions.
Besides the familiar icons for harddisks, CD drives and USB sticks etc., there are a few that indicate a their mount mode:

		The /boot partition
		An encrypted partition
		A partition shared through SMB/NFS etc.
		A partition that was mounted read-only
		A mounted image file (see also the diskimage command)

When mounted, a colored bar shows the used space of a partition. The color depends on the kind of partition:

You can select a partition and choose various commands from the context or Partition menu, like Mount/Unmount, or to Open in DiskProbe.

You can also Format or completely Delete a partition.

Initializing a disk

If you don't plan to use just one of the partitions of a larger disk, but the entire drive as one partition, e.g. a USB stick or a Compact Flash card, you'll have to initialize the disk first.

You do this by selecting the raw disk from list of devices and choose a partition map from the Disk | Initialize menu. The Intel Partition Map is the right choice for classical booting via a BIOS.

Tworzenie nowej partycji

Kiedy już znajdziesz niesformatowane miejsce na dysku, takie jak powyższe <puste>, możesz stworzyć nową partycję korzystając z Partycja | Utwórz...(ALT C).

Zostanie otwarte powyższe okno dialogowe, które pozwala dostosować rozmiar oraz typ partycji. Wybierz System plików Be jeśli chcesz użyć partycji do zainstalowania Haiku lub chcesz używać na niej wszystkich ciekawych funkcjonalności systemu, takich jak zapytania i atrybuty. Pamiętaj że inne systemy operacyjne mogą nie mieć dostępu do takich partycji.

The Active partition checkbox is only available if you have created a primary partition instead of just another logical partition within an extended one. You'll have to tick that checkbox if you plan to use that partition to boot a Haiku installation.

Before you can use, or even mount the newly created partition, it has to be formatted with a filesystem.

Formatting a partition

Only unmounted partitions can be formatted by choosing a filesystem from the sub-menu of Partition | Format. The Be File System (BFS) is mandatory for a Haiku boot partition and recommended for data partitions to be used with Haiku. Only BFS formatted partitions can be queried and fully support Haiku's file attributes.

Here you set the name for the partition and it's blocksize. The blocksize is the space in bytes that a file will allocate at minimum. 2048 bytes per block are recommended, but you can choose larger or smaller sizes if you have these very specific needs.
If the future data on your partition won't need any querying, you can uncheck Enable query support to save a bit of overhead for managing the index.