mapped pages and a non-read and non-write protection to block a certain address
range from being used by anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33030 a95241bf-73f2-0310-859d-f6bbb57e9c96
its open_dir() implementation instead (as suggested by Ingo).
-alphabranch (it's only a cleanup)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33025 a95241bf-73f2-0310-859d-f6bbb57e9c96
a directory, we returned EINVAL instead, which caused Perl's internal
glob() implementation to fail prematurely
+alphabranch (will do that myself in a minute)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32999 a95241bf-73f2-0310-859d-f6bbb57e9c96
end up as 0 again in any case. It certainly looks correct without it, removing
so it doesn't confuse the next one reading over it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32994 a95241bf-73f2-0310-859d-f6bbb57e9c96
many pages as are actually missing, not the full count.
* Take into account that free_page_queue_count() can be less than sReservedPages
(when some of the reserved pages have been allocated already) in
vm_page_num_unused_pages(). Before it could return negative and therefore
wrapped numbers.
* Simplify the page scrubber loop by continuing early. Also avoids a needless
interrupt spin lock acquisition when there's nothing to do.
* Some minor coding style cleanup.
* Fix a typo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32980 a95241bf-73f2-0310-859d-f6bbb57e9c96
allows for BFS based LiveCDs. Still this whole name matching feels hacky.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32976 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows for synchronous uses where subrequests are forked off and waited on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32936 a95241bf-73f2-0310-859d-f6bbb57e9c96
only some sub requests worked. Previously we would have simply canceled all
of the subrequests in the loop because we cancel after the first error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32914 a95241bf-73f2-0310-859d-f6bbb57e9c96
* An off by one error prevented the very last block of a device to be accessed
through IO.
* In case of error the request wasn't notified causing anyone (the page writer
for example) to wait forever for the request to complete.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32913 a95241bf-73f2-0310-859d-f6bbb57e9c96
capabilities to aid in debugging memory corruption issues.
It does:
* Initialize memory to 0xcc to help turn up use of uninitialized memory
* Set freed memory to 0xdeadbeef to help find accesses of freed memory
* Use the paranoid heap validation to turn up many cases of memory corruption
* Use a simplistic wall check to turn up memory overwrites past allocations
* Take extra steps to validate freed addresses to turn up misaligned frees
It has an interface to en-/disable paranoid validation and to start/stop regular
wall checking. Both are currently just enabled. At a later stage a debug version
of libroot could be used by an application and the checks enabled at will. Note
that due to the paranoid validation and the suboptimal locking this allocator
will perform horribly. Still to find memory corruption issues in the system or
also in your applications it can be helpful to build your installation with it
turned on. To enable it you currently need to edit the Jamfile to sub-include
the malloc_debug instead of the malloc directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32894 a95241bf-73f2-0310-859d-f6bbb57e9c96
for the page list but not the area one. Since multiple pages can be allocated
at once, even an area that is not at the top of the list can become empty. In
such a case the area list would previously have lost entries. Also because
we can remove more than one page from any area, not just the top one, we may
need to move forward in the list so that it stays ordered by free pages.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32880 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of <dirent_private.h> -- the __DIR structure is private to dirent.c,
now. The attribute directory, index directory, and query functions use the
the public POSIX API, so does the kernel module code. Those components were
not initializing the structure correctly anymore since the introduction of
telldir()/seekdir().
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32819 a95241bf-73f2-0310-859d-f6bbb57e9c96
to " &" as really the whole rest of the file uses that style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32813 a95241bf-73f2-0310-859d-f6bbb57e9c96
switch /boot to a different volume in two operations, unless you have first
linked /system/lib into /bin. This patch assumes that / will always have the
ID 1. Don't know if that is proper. Note that I also thought about solving
this in the VFS, since perhaps it isn't the job of root-fs to know about
/boot, but that would of course introduce another check for every rename
operation, which I decided against.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32806 a95241bf-73f2-0310-859d-f6bbb57e9c96
Seems like we didn't remember to change it back, even
with the #warning. :-)
I tested ftp and it works fine. This also closes ticket #4176.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32766 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved device_manager/settings.cpp to debug/safemode_settings.cpp.
* Removed the somewhat hacky concatenation of kernel settings and safemode
settings in the boot loader. Instead, get_safemode_option() will now fall
back to the kernel settings, if it couldn't spot a setting in the safemode
settings. This allows for more control, and also makes enabling serial
debug output actually work (ie. overriding the kernel settings via safemode
options).
* Adjusted debug_init_post_vm(), and smp_init_other_cpus() to use
get_safemode_boolean().
* Therefore, I added safemode_settings.cpp to the boot loader as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32685 a95241bf-73f2-0310-859d-f6bbb57e9c96
So either +alphabranch or remove the declarations from <dirent.h>.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32679 a95241bf-73f2-0310-859d-f6bbb57e9c96
into the scope of the lock. Saves an InterruptsSpinLocker.
* Use an InterruptsSpinLocker() as in other places.
* When creating/forking a team fails because the kernel thread cannot be spawned
balance the already sent TEAM_ADDED notification by sending a TEAM_REMOVED one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32595 a95241bf-73f2-0310-859d-f6bbb57e9c96
been removed. That includes CPU disabling and thread pinning, as that becomes
pointless with only one CPU.
* Return a proper reschedule hint on enqueing a thread, based on the priority
of the current thread vs. the enqueued one.
* Enable dynamic scheduler selection. With one CPU the simple scheduler will
be used, otherwise affine is selected.
* Removed the scheduler type define as we now always auto-select it.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32573 a95241bf-73f2-0310-859d-f6bbb57e9c96
* scheduler_enqueue_in_runqueue() now allows the scheduler to return a hint as to whether a reschedule is desirable or not. This is used in a few other places in order to relegate scheduling decisions entirely to the scheduler rather than the priority hacks previously used. There are probably other places in the kernel that could now make use of that information to more intelligently call reschedule() though.
* Switch over the default scheduler to scheduler_affine().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32554 a95241bf-73f2-0310-859d-f6bbb57e9c96
you can easily produce a dead lock. This should fix the system hang
experienced as part of bug #4223.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32526 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Keep track of the currently running threads.
* Make use of that info to decide if a thread that becomes ready should preempt
the running thread.
* If we should preempt we send the target CPU a reschedule message.
* This preemption strategy makes keeping track of idle CPUs by means of a bitmap
superflous and it is therefore removed.
* Right now only other CPUs are preempted though, not the current one.
* Add missing initialization of the quantum tracking code.
* Do not extend the quantum of the idle thread based quantum tracking as we want
it to not run longer than necessary. Once the preemption works completely
adding a quantum timer for the idle thread will become unnecessary though.
* Fix thread stealing code, it did missed the last thread in the run queue.
* When stealing, try to steal the highest priority thread that is currently
waiting by taking priorities into account when finding the target run queue.
* Simplify stealing code a bit as well.
* Minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32503 a95241bf-73f2-0310-859d-f6bbb57e9c96
re-insert it at a new place, but by only setting the priority and not the
next_priority field, the thread would actually be enqueued at the same priority
level as before. Didn't cause any real damage, guess it was just an oversight.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32494 a95241bf-73f2-0310-859d-f6bbb57e9c96
not hold the bin lock while setting and only protect the actual freeing. May
reduce bin lock contention a little bit.
* Tiny optimization for force-clearing 0xdeadbeef. Do it after setting to 0xcc,
so that it's less likely we have to do it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32473 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Always select POLLNVAL. We wouldn't get notified, if the FD was closed while
waiting.
* Skip negative FDs (as per POSIX standard).
* When encountering an invalid FD, we must not wait. Previously we did that as
long as any FD was valid.
* The return count must consider all FDs with non-null revents, including
invalid ones (revents is POLLNVAL then).
common_poll()/common_wait_for_objects():
* Don't bail out early, when no FDs/objects have been selected. We always want
to wait.
_user_poll()/_user_wait_for_objects():
* Copy the array back to userland even if common_*() returned an error. The
functions do now always fill in the resulting events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32418 a95241bf-73f2-0310-859d-f6bbb57e9c96
* B_EVENT_INVALID is no longer passed to the FD's select()/deselect() hooks.
* Now we always attach the select info to the I/O context, even if no event has
been selected. The reasoning is that B_EVENT_INVALID is always automatically
selected and handled by the VFS, so we need the handle to notify on close().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32417 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- implement atomic_set() for PXA and other pre-arm6.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32413 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add assembler code to actually jump to the kernel.
The terminal now says:
kernel entry at 80048228
PANIC: acquire_spinlock: attempt to acquire lock 0x8012a59c with interrupts enabled
Welcome to Kernel Debugging Land...
Thread 0 "" running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32408 a95241bf-73f2-0310-859d-f6bbb57e9c96
Turn off interrupts at loader entryn and make sure the mmu is disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32405 a95241bf-73f2-0310-859d-f6bbb57e9c96
This seems to work around the dynamic segment having a huge file size in headers, it must also be in the data segment...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32404 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add support for boot splash, only for PXA.
Disabled for now as it forces the framebuffer onto some useful data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32399 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of using the user buffer. This frees the VFS and FS implementations
from handling user buffers.
* Adjusted fix_dirent() accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32384 a95241bf-73f2-0310-859d-f6bbb57e9c96
Start of framebuffer initialization for the Verdex board.
For now it points to the data section as framebuffer for testing and shows an RGB pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32352 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vesa driver no longer uses VGA programming if the chip does not support
VGA compatibility.
* The VESA driver now tries to set the DAC to 8 bits per color gun.
* In VESA modes, the driver no longer tries to use VGA programming; introduced
the new vesa_set_indexed_colors() that is now used for palette programming.
This should fix wrong colors of 8 bit BWindowScreen users with VESA on real
hardware (emulators usually didn't mind either way).
* Note that the app_server needs to maintain a palette per 8 bit screen, as
right now, the colors are garbled after a workspace switch. Stefano, are you
looking into that already?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32347 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't forget the ELF header else we end up loading at 0x7fff8000...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32341 a95241bf-73f2-0310-859d-f6bbb57e9c96
Use the same trick as for m68k (r26536) to get separate text & data segments for the kernel, though this should really not be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32340 a95241bf-73f2-0310-859d-f6bbb57e9c96
Update the memory map to account for passed tgz mapping. It's still hardcoded for now though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32339 a95241bf-73f2-0310-859d-f6bbb57e9c96
Actually enable mmu_init() since it works for verdex now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32338 a95241bf-73f2-0310-859d-f6bbb57e9c96
move checking for the tgz after debug init, and print something when found.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32337 a95241bf-73f2-0310-859d-f6bbb57e9c96
Partial implementation of mmu support for the bootloader, with lot of debugging output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32330 a95241bf-73f2-0310-859d-f6bbb57e9c96
- empty u-boot specific platform code for the kernel,
- add various objects needed by the kernel from libroot or the generic C implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32328 a95241bf-73f2-0310-859d-f6bbb57e9c96
- stubbed out many arch kernel functions (borrowed from other archs),
- partially implement ELF relocations code, enough to load the kernel,
- move uart.c to kernel sources and use the same one for the loader,
- default implementation for gensyscalls,
- assembler code functions for interrupt masking (enable/disable/restore/query).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32327 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add unwind symbols to the kernel too... not sure it goes here though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32325 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stubbed out config_manager and pci bus_manager arch code.
Now really use the boot floppy tgz for the netbsd uimage as it all builds, but with other kernel arch code not yet commited.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32324 a95241bf-73f2-0310-859d-f6bbb57e9c96
Move the unwind data out of the bss section, it broke bss init which ended up erasing real data and making dprintf do weird things...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32308 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- moved the startup asm code to u-boot/arch/arm/shell.S
- added netbsd loader entry point,
- store the invocation type (0: standalone, 1: netbsd),
- store the global data in a variable,
- added some debug code to see what U-Boot gives us.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32291 a95241bf-73f2-0310-859d-f6bbb57e9c96
Missed this one in previous commit: remove board.ld include as we now give LD the address directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32285 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
Condition the exclusive ops to >= armv6 instead of specific version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32277 a95241bf-73f2-0310-859d-f6bbb57e9c96
case was an unterminated string, though).
* fix_dirent() did not copy the trailing null-byte.
* Not yet entirely sure why, but this caused #4214.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32254 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stub out swap funcs for pre armv6 which lack REV/REV16. WRITEME.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32240 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporary (?) solution to linking the loader: generate symbols needed by the unwinding code, which should actually not be used since we disable exceptions...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32239 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote PartitionMapWriter
* Updated style to match current style guide for the intel partitioning system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32235 a95241bf-73f2-0310-859d-f6bbb57e9c96
until the data it protects isn't in active use anymore. Previously it would
release the translation map and therefore the page directory reference while
the page dir was still set on the CPU, as only the actual call to
i386_context_switch() will replace the page directory in the control register.
This didn't cause any harm though, as during the context switch interrupts are
disabled and therefore the page directory would only be deferred_delete()ed and
not directly freed/overwritten. Still this is logically more correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32216 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add rule to handle uimage, and board-specific stuff to handle load addresses. Need to fix them, u-boot doesn't like loading the file with the header where the header says it should go, must copy to a different address.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32214 a95241bf-73f2-0310-859d-f6bbb57e9c96
Include board-specific file from the u-boot ldscript, to allow linking to different load addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32207 a95241bf-73f2-0310-859d-f6bbb57e9c96
Move uart.c to arch/arm/ where it belongs, it has nothing u-boot specific.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32203 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- add an uart_debug_port() to avoid using the #define in serial.cpp,
- use board_config defines in uart.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32201 a95241bf-73f2-0310-859d-f6bbb57e9c96
more robust against broken (userland) file systems.
* 80 character column cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32184 a95241bf-73f2-0310-859d-f6bbb57e9c96
a good idea; it didn't have any consequences in there, but actually broke
the app_server's support for the VGA mode.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32181 a95241bf-73f2-0310-859d-f6bbb57e9c96
time. But since this is also locked from within the driver/directory watcher
(with the node monitor lock held), and handle_driver_events() could cause
node monitoring updates, the locking order could be reverted, causing a
deadlock (I just ran into).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32152 a95241bf-73f2-0310-859d-f6bbb57e9c96
be broken in the app_server now, but I haven't checked yet.
* Fixed typo in vesa.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32141 a95241bf-73f2-0310-859d-f6bbb57e9c96
accessible to the userland - this fixes#2405 (ie. MediaPlayer overlay now
works).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32135 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts when invoking it. The user TLB invalidation function essentially only
reads and writes back control register 3 (cr3) which holds the physical address
of the current page directory. Still a preemption between the read and the write
can cause problems when the last thread of a team dies and therefore the team
is deleted. The context switch on preemption would decrement the refcount of the
object that holds the page directory. Then the team address space is deleted
causing the context switch returning to that thread to not re-acquire a
reference to the object. At that point the page directory as set in cr3 is the
one of the previously run thread (which is fine, as all share the kernel space
mappings we need). Now when the preempted thread continues though, it would
overwrite cr3 with the physical page directory address from before the context
switch still stored in eax, therefore setting the page directory to the one of
the dying thread that now doesn't have the corresponding reference. Further
progressing the thread would release the last reference causing the deletion
of the object and freeing of the, now active again, page directory. The memory
getting overwritten (by deadbeef) now completely corrupts the page directory
causing basically any memory access to fault, in the end resulting in a
triplefault. This should fix bug #3399.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32118 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk device to the locking functions, not only the ID of the disk device
itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32094 a95241bf-73f2-0310-859d-f6bbb57e9c96
- added some multiboot support code:
- dump some of the passed info,
- parse command line (skip the 'kernel' name and pass the rest to stage2_args.arguments),
- added an add_stage2_driver_settings() function which takes stage2_args.arguments and translates it into safe mode driver settings, a bit dumb for now.
This allows using qemu -kernel haiku_loader -append 'debug_screen true' and get debug output without having to enter the menu (once multiboot info is used to determine the boot device too).
The idea is to allow passing driver settings and using them to pass extra stuff (like 'force_keymap fr' and other stuff for demo), and to help automate tests ('run_test /bin/sometest').
This should answer Axel's question :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32076 a95241bf-73f2-0310-859d-f6bbb57e9c96
allow for more parallelism. Also introduce seperate locks for the bins and
for page allocation. This greatly reduces lock contention and reduces the
duration the locks are held due to them overall protecting less code. Now only
allocations of the same size hitting the same allocator or allocating larger
chunks of memory should block. Previously, basically any allocation and also
free would be mutually exclusive, making it scale pretty badely.
* Added memalign_nogrow(). As it uses heap_memalign() anyway, there's no real
reason not to allow for an alignment.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32074 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
- stubbed out arch_cpu_init_percpu(),
- make atomic ops declarations extern "C",
- move calls to [i]sync inside the asm code that needs it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32067 a95241bf-73f2-0310-859d-f6bbb57e9c96
Based on a patch from Dustin Howett, reworked, and help from Vladimir 'phcoder' Serbinenko.
- used defines for clarity, the rest of teh code could make use of them too...
- added a gMultiBootInfo pointer to the passed args, to let C code handle it instead of faking the boot drive ID,
- conditionalized the copy back, maybe we can get rid of it when QEMU handles our default load address correctly,
- added video mode info to ask for 1024x768 but QEMU ignores it anyway, and we might need to show the menu, so it's disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32059 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_READ_ONLY_DEVICE if it has a write hook.
* This fixes bug #4141.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32004 a95241bf-73f2-0310-859d-f6bbb57e9c96
cannot assume that the file is that long - we need to check for the actual
file size specifically, and then clear the extraneous bytes based on that one.
* This fixes seeing old file left-overs in the space beyond the file size in
mmapped file. Thanks to Oliver who provided me with a nice test program to
reproduce this problem (this should also fix gcc's fix_includes app (although
I wonder what it does if a file actually ends on a page boundary).
* Also fixed a bug in precaching that would cause the last page of the cache
to be discarded, causing it to be re-read later on.
* Moved partial page clearing into its own function
read_pages_and_clear_partial(), even though it's currently only used once.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32001 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing buffer entry list at least. Eventually we should check the entries
themselves, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31999 a95241bf-73f2-0310-859d-f6bbb57e9c96
used to mark entries after recovering a tracing log from a previous session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31991 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing use before real initialization to be ignored gracefully again. Fixes
#4158.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31973 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved the static variables for managing the tracing buffer into a separate
area. The area is mapped at one of a few possible physical addresses and can
be found again when rebooting. This allows us to resurrect the tracing buffer
from the previous session, which could help tremendously when tracking certain
bugs (like triple faults). There's very little checking done yet, so it is
probably not as robust as we would wish it to be.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31942 a95241bf-73f2-0310-859d-f6bbb57e9c96
call to fetch non-clear pages.
* B_PHYSICAL_BASE_ADDRESS does now imply B_CONTIGUOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31932 a95241bf-73f2-0310-859d-f6bbb57e9c96
too, and I do not dare to add a glibc-based source to our kernel.
This means that our kernel will have to live with strod() yielding
inaccurate results, but since the only use I have found was for fs-queries,
I think we can cope for now.
* added a comment to the top of strtod.c that explains the current state.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31925 a95241bf-73f2-0310-859d-f6bbb57e9c96
version that lives in our repo, too, and actually works as intended
* removed the broken strtod() implementation from the repo
This fixes all floating-point test regressions reported in #3308.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31919 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reverted r31809 as it introduced a race condition; if the I/O request had been
notified, it could already been deleted at that point.
* Instead, we need to notify the request in each file system/driver that uses
it. Added new notify_io_request() function that does that exactly.
* Added a TODO comment to the userlandfs where the request notification needs
a bit more thought.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31903 a95241bf-73f2-0310-859d-f6bbb57e9c96
each attribute access needed 3 syscalls, now only one as it should.
* Renamed the new Haiku call fs_open_attr() to fs_fopen_attr(), and added a new
function fs_open_attr() that takes a path (same semantics as the
fs_[f]open_attr_dir() functions already present in BeOS).
* Merged former _kern_open_attr(), and _kern_create_attr() into one syscall.
* Cleaned up vfs.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31881 a95241bf-73f2-0310-859d-f6bbb57e9c96
writing lines that are printed below the previously cleared lines when paging.
Fixes bug #4145.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31865 a95241bf-73f2-0310-859d-f6bbb57e9c96
will show the next page after a timeout of 3 seconds instead of waiting for a key
to be pressed. This allows you to enjoy onscreen debug output even when you only
have a USB keyboard. Should be enough time to take a quick look or take a photo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31814 a95241bf-73f2-0310-859d-f6bbb57e9c96
UI freezes (ActivityMonitor and ProcessController both use get_system_info() a
lot), although this is only the symptom of another problem.
* The downside is that the block cache usage information isn't as up to date as
it was previously - it's updated by the block write/notifier thread now (worst
case every 2 seconds).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make the allocations command available even without leak checking. The sizes
that are dumped aren't as accurate without leak checking info, but having the
address and max size is already helpful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31811 a95241bf-73f2-0310-859d-f6bbb57e9c96
about it (there is also no public API to do that in the FS yet).
* This could have caused bug #2719, although the specific reason why the FS hook
failed remains unknown. At least it won't hang in this case anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31809 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tracker's OpenHashTable.h which it should eventually replace. We've renamed the
class to BOpenHashTable and changed the interface slightly so that HashTableLink
became superfluous.
Adapted all the code that used it. Since the OpenHashTables no longer clash,
this should fix the GCC4 build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31791 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions.
* Since we now use UserStringParameter, this fixes the missing null termination
of the parameter string, and thus bug #4045.
* Removed UserMemoryParameter, as it's no longer in use.
* Adjusted syscalls accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31779 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk; but since mount points are always kept in memory, it makes much more
sense to use lookup_vnode() instead.
* As a side effect, directory listings are no longer aborted when they contain
broken files that could not be retrieved anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31775 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixes#4106 for good.
* Also removed a bit of dead code in that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31732 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the boot loader to have architecture dependent partition/file system
support. Amiga/Apple partitions, and the AmigaFFS file system are now only
supported on PPC, while EFI GPT, and the FAT file system is now only supported
on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31713 a95241bf-73f2-0310-859d-f6bbb57e9c96
that we lost a few keystrokes, and would make keys (like SysReq) stick.
Thanks to Rene for the note!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31688 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
reduced the boot time in VMware by several seconds, and should also help with
booting from CD.
* Added TODOs on how to further improve the situation in the future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31672 a95241bf-73f2-0310-859d-f6bbb57e9c96
parameter from start_system_profiler().
* Added stack depth, and interval parameters to it, though.
* Profiling the boot process is now possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31671 a95241bf-73f2-0310-859d-f6bbb57e9c96
patch from about a year ago (I couldn't use any code of his yet, though,
but there are a few things left). The emergency keys are triggered by
pressing Alt-SysReq + key.
* By default, only Alt-SysReq+'d' is used as a means to deliberately enter
the kernel debugger. F12 belongs to userland again, now :-)
* Debugger add-ons now have another optional method to implement their own
emergency keys - 'd' for the debugger cannot be overridden, though.
* The mechanism can be turned off via a new kernel setting, so it's not that
easy anymore to "crash" Haiku if you don't want to.
* Right now, the PS/2 driver, and the pre-input_server in-kernel debugger
keyboard mini-driver support this, USB not yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31660 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing name parameter to the partitioning system module child creation
and child creation validation hooks. Pass the name to them.
* Added BPartitionParameterEditor interface, which is/will be used for editing
disk system specific parameters.
* Implemented partition parameter editors for BFS initialization and Intel
partition map child creation.
* Fixed the incorrect supported child partition type iteration in the Intel
partition map add-on. It does now return actual types.
* Handle the "active" flag parameter in the Intel partitioning system module.
* DriveSetup:
- Replaced the "Create" submenu by a simple menu item. The type can now by
chosen in the dialog.
- Make use of initialization and child creation parameter editors. Some
non-generic code has been moved to the respective editor implementations
(BFS, intel partitioning system).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31658 a95241bf-73f2-0310-859d-f6bbb57e9c96
profile data area, and evaluate its data - it doesn't produce any output yet,
though.
* _user_system_profiler_recorded() now also makes sure the userland app can read
from the buffer area.
* Fixed leak in SharedImage::Init().
* Made the symbol retriever more smart when it deals with kernel images; if the
image ID is no longer available, it will now use the path based image symbol
iterator (and also adds the boot kernel path, in case the module don't have
one).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31653 a95241bf-73f2-0310-859d-f6bbb57e9c96
* devfs:
- devfs_[un]publish_partition(): They no longer get the partition path as
parameter, but rather the device path and the partition name.
- Added devfs_rename_partition(), which renames an already published
partition node.
* KPartition/KDiskDevice:
- Replaced the fPublished flag by fPublishedName, the name under which the
partition is published. This simplifies UnpublishDevice() and makes it
practically infallible.
- Added GetFileName(), which only returns the partition's file name.
Simplified GetPath() by using it.
- When a partition is added/removed the subsequent sibling partitions get a
new index. Now we also rename their published device nodes (and those of
their descendents). When something goes wrong we unpublish the concerned
partition's device to be on the safe side. Would be a shame to accidentally
format the wrong partition, eh? :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31520 a95241bf-73f2-0310-859d-f6bbb57e9c96
compliant with one that is both, and magnitudes faster at that, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31498 a95241bf-73f2-0310-859d-f6bbb57e9c96
it's signature indicates that it should - the callers just never use
the value currently, so it caused no harm
* squashed a TODO in the runtime_loader about the resolving strategy
for undefined symbols in add-ons: I've implemented the breadth-first
strategy (leaving out the add-on itself), as that one made most sense to
me.
This avoids loader problems with older optional packages of Pe on gcc4, as some
add-ons (e.g. "Expand Tabs") could not be loaded due to them containing undefined
symbols that are found in second level dependencies (libstdc++.so in this case).
Ingo: please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31465 a95241bf-73f2-0310-859d-f6bbb57e9c96
KPartition::CreateChild(). CreateChild() calls AddChild(), which publishes
the new partition, though at that point offset and size were not set, so that
the published devices would not be usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31463 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SetBusy(): Use AddFlags() instead of SetFlags() so that the other flags
aren't cleared.
* AddChild(): Publish the newly added child partition. Otherwise no-one can do
anything with it without rebooting first. Other children may need to be
republished under a new name, if their index changes, which doesn't happen
yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31444 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed time.c to time.cpp.
* set_timezone() now uses localtime_r() instead of localtime(), and will also
no longer fail in case there was no timezone symlink before.
* Cleaned up OS.h header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31371 a95241bf-73f2-0310-859d-f6bbb57e9c96
in case one just want to get or set the timezone.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Always use _kern_create_attr() in fs_write_attr(), or otherwise it might not
be created when it should.
* Stippi special: fixed typo "in another words" -> "in other words" ("a" is
singular, not plural).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31312 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As even the author of fs_attr.c was trying to use fs_write_attr() in an
unsupported way in the cp copy_attributes() implementation, try to be
more forgiving and support writing attributes at an offset. The method is
required to behave inconsistent in that replacing bytes at offset 0 is
not supported as replacing bytes at any other offset. Writing at offset 0
will clobber the existing attribute to stay compatible with BeOS.
NOTE: BFS itself still does not support writing attributes at an offset which
are withing the "small data section". To work around this problem, programs
which copy attributes in a loop must make sure that their buffer is large
enough that such "small data section" attributes require only one loop
iteration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31309 a95241bf-73f2-0310-859d-f6bbb57e9c96
the node listener, to make sure it won't lose track.
* The DriverWatcher now also listens for B_ENTRY_REMOVED. This causes drivers to
be unpublished even if they are only symlinked.
* However, to detect new drivers in a symlinked location, we'd need special
support for those, and also need to watch the parent directory of the symlink
target - this is close to overkill, so I stayed away from implementing that
for now :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31267 a95241bf-73f2-0310-859d-f6bbb57e9c96
after all CPUs have been queried for their features. On SMP machines
sysenter/sysexit weren't used before due to the non-boot CPUs appearing not
to have the feature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31226 a95241bf-73f2-0310-859d-f6bbb57e9c96
is a syscall iframe.
* User debugger support: Don't to call BreakpointManager::PrepareToContinue(),
if the thread returns from a syscall. We don't want to skip breakpoints in
that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed team debugger and adjusted the code accordingly. It's not needed yet,
but I intend to add support for software breakpoints and those require a bit of
uninitialization that needs to be synchronized with debugger changes and can't
be done with interrupts disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31194 a95241bf-73f2-0310-859d-f6bbb57e9c96
and added a _kern_unreserve_address_range() as well.
* The runtime loader now reserves the space needed for all its areas first
to make sure there is enough space left for all areas of a single image.
* This also fixes the final part of bug #4008.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31115 a95241bf-73f2-0310-859d-f6bbb57e9c96
the first part of making the runtime loader behave itself; it should already
make Clockwerk run okay with any number of translators (even if not all of
them will work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It was broken since the support for debugger handovers. Using
debugger_write() couldn't work, since the thread didn't belong to the
debugged team anymore (but to the kernel) and thus getting the debug info
for team would always fail. This makes B_DEBUGGER_MESSAGE_THREAD_DELETED
notifications work again.
* Allow the thread to block. Locking/writing to the port was non-blocking
before, but there shouldn't be a problem, if the thread has to wait.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31076 a95241bf-73f2-0310-859d-f6bbb57e9c96
stopped. Besides that the message won't be interesting to the other threads
anyway, we also risk filling the port and blocking the nub thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31075 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
first run only set up uncacheable MTRRs and in the second run set the write-back
ones up. If this order is not followed, we could set too large ranges to
cacheable first and then limit it back to uncacheable later. On systems with
enough physical memory this would lead to a temporary situation in which areas
become cacheable that must not be, resulting in system hangs or other unexpected
behaviour. Fixes last part of #4018.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31027 a95241bf-73f2-0310-859d-f6bbb57e9c96
boot device is actually read-only (even if it's using the write overlay).
* Do not create a swap file on a read-only device - this would really be a
stupid use of the write overlay (just saw this happening on an older
machine).
* Made swap_file_{add|delete}() take a const char* path - there was no reason
this was writable, and this also avoids casting away the const when adding
the default swap file.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30975 a95241bf-73f2-0310-859d-f6bbb57e9c96
only one of its partitions went away. This should fix#3983.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30961 a95241bf-73f2-0310-859d-f6bbb57e9c96
also mess up the file map, causing all sorts of file corruption.
* This fixes bug #3991 (and eventually some others).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30960 a95241bf-73f2-0310-859d-f6bbb57e9c96
demangler, where it belongs. The gcc 4 stack traces look correct now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30955 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a simple dedicated heap for the kernel debugger with stacked allocation
pools (deleting a pool frees all memory allocated in it). The heap should
eventually be used for all commands that need temporary storage too large for
the stack instead of each using its own static buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30949 a95241bf-73f2-0310-859d-f6bbb57e9c96
