* Haiku now consumes right at 700 MiB on x86_gcc2h
after the webkit update.
Change-Id: Ia41a3e6252190e73feaa49ebe7c58ef4c80df4dc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4161
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Solves out of space issue building release images
Change-Id: I888836774732f65fde3574ef498b272d8285356f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4107
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
- Switch to Python3
- Switch to mawk instead of gawk
- Update ffmpeg (there are several new dependencies)
- Update ICU
- Fix various pre-existing problems with packages not being properly
declared for gcc2 (but somehow it ended up working)
- remove curl, subversion, mercurial
Confirmed that both nightly and release images are building fine on both
32 and 64bit. However, non-x86 architecture may require re-bootstrapping
to do a complete nightly or release image build (the minimal profile
should be fine)
Fixes#16751.
Change-Id: Iacac92923c4113b3e0a49a64b0b4cc1b8e2f5e2e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3871
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Notable changes:
* jpeg replaced with libjpeg_turbo across the board.
* man replaced with mandoc.
* ilmbase merged into openexr.
* gnutls no longer needed in this set.
A few other packages unused in the local scripts were
also removed. Build fixes are in following commits.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This makes pkgman functional in minimum-profile images.
Change-Id: I3578886743fecbf76779ac1b4b76762d8ce1be3d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1715
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Let's make the nightly builds consistent in a way that they would always
be recognized by libosinfo (and, consequently, by GNOME Boxes,
virt-manager, virt-install, ...) by explictly using "nightly" instead
of the $(HAIKU_VERSION) when generating nightly builds.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change-Id: I6fc4f15be1e8e9244abf14e75308fc825f37b2e8
Reviewed-on: https://review.haiku-os.org/c/1053
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
We don't want to ship these images as the ones for main distribution,
but at least we can make them available as downloads for those who do want
to use CDs.
* This gives us plenty of space for source packages.
* A Mini-DVD is 1.4 GiB, and USB sticks of 2 GiB are at
the sweet spot of low-price vs size.
* Unused space will be compressed in release zip.
* We blew by 700 MiB long ago. Sorry CD-R folks.
Change-Id: I3bbe4508777027f6fe7c0ee2992637541feeb88f
Also add AddHaikuImageSourcePackages invocations for all relevant
(i.e. [L]GPL'ed) packages.
Doesn't truly fix#9990 as PackageKit cannot be used to install source
packages, but this is enough for creating a redistributable image,
so that ticket can be moved out of the beta1 milestone now.
- Both Noto and Noto Sans CJK JP are now used as font fallbacks,
allowing to cover a rather large range of characters. This also makes
it possible to mix the two fonts easily.
- Remove VL-Gothic from packages and from AboutSystem
- Add Noto fonts to the dependencies of the Haiku package.
This provides a similar look for all languages as discussed on the
mailing list.
This reverts commit 945566ff43.
As discussed on the mailing lists and with Humdinger off-list:
* The general design concensus tends slightly towards DejaVu, as metrics
of DejaVu look much better (DejaVu 12 and Noto 13 are roughly the same size,
but Noto has much wider margins with that)
* While Noto does have a wider set of fonts with support for lots of
different languages, DejaVu actually has built-in support for more
Unicode languages (the default Noto has, as far as I can tell, only
Latin/Greek/Cyrillic [2416 glyphs], while DejaVu also has Armenian, Georgian,
and a few other scripts too [5119 glyphs].)
* The worse rendering of DejaVu appears to have been somewhat rectified by
disabling the average-based subpixel filter in app_server.
* Re ML discussions, this should make a lot more
sense to users as it is inline with what most
linux distros ship.
* This will require a tweak to the buildbot.
* First step to shipping anyboot instead of plain iso.
* Drop lib/edit and matching bsd header
* Convert Debugger to libedit build package
* Should solve problems with libedit consumers
not defining _BSD_SOURCE
* Progress on #10267
* None of these are required to be cross-built, as they all can be built on
the bootstrap image just fine.
* Additionally, update bash_boostrap from 4.27 to 4.30, as 4.27 causes the
build of gcc on the bootstrap image to fail.
Now that the fake packages are in place, it is much easier to build the
MMC image for ARM without the need for a bootstrap build.
This image still does not manage to access the tarfs and load the kernel
modules, but it gets to KDL, at least.
* Cleanup the SD card image building to allow jam -q @bootstrap-mmc to
work.
There are a few remaining tricks before you can safely build an image:
* This uses a non-POSIX du option, and is only tested with Linux du
only (Linux is the only supported system to run bootstrap builds,
anyway)
* The Python recipe in haikuports.cross is known to not build on
Debian/Ubuntu, but work fine on OpenSuse. There is a patch available in
haikuports bugtracker to allow the reverse.
* You need to populate the haikuports repo package list with some
packages (which don't exist yet) to make the build system happy. But our
git hook to generate the repositories is preventnig me to share this
hack.
Once built, the image currently crashes early in the kernel execution.
On to debug that!
* The content of the preprocessed package-info files and the package
contents depend on the build type, so we use a different folder for
each build type.
* Instead of separate variables, HAIKU_BUILD_TYPE is set to one of
'bootstrap', 'minimum' or 'regular'.
* Adjust uses of HAIKU_BOOTSTRAP_BUILD accordingly.
* Add new build profile 'minimum', which defines a minimum set of
packages.
* Introduce HAIKU_BOOTSTRAP_SOURCES_PROFILE and let it default to
'@minimum-raw'. This can be overruled in UserBuildConfig, setting
it to '@release-raw' will cause all source packages required for a
full release to be put onto the bootstrap-image.
* Add new image HaikuImageMinimum, which is meant to define the minimum
useful Haiku image (yeah, I know that's vague).
* Add HAIKU_MINIMUM_BUILD, which indicates that HaikuImageMinimum should
be used (it would be better to merge this with HAIKU_BOOTSTRAP_BUILD
into something like HAIKU_BUILD_TYPE)
* Cleanup duplicate references to basic packages - those are now added
by the topmost Jamfile (no longer referenced by the build profiles).
