* GCC6+ will warn when you truncate potentally "too much data"
Volume name 255. fName is 32.
* We don't think we care enough to enlarge fName?
Change-Id: I6f453ee62c856481605594b2ae5ff9ab41244bd1
* This gives us a solid automatic entry point to u-boot
* A uEnv.txt specifies the fdt file name
* This should work on any modern u-boot for most architectures
* Non-mmc targets will likely need some work
Change-Id: I9a00316a213a15e85d3f2e18574d64920d9bdb76
On GCC 7.3, it conflicts with our definition of 'fork'. The documentation
states that disabling builtins has no effect on versions where they
do not exist, so we don't need to check for GCC7 here.
Previously they just silently continued, which meant that if part of the
cross-tools build failed, you would have to scroll back pretty far to
see what the failure was.
* x86_64_signal_handler_compat is a dump of x86 x86_signal_frame_function().
* the x86 compiler should be used to produce this code, which ends up in the
commpage.
Change-Id: I03da02c376f67ff83dbaba9bcb144da726463996
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
Handled as a 1-button mouse. We didn't really support this since the old
Macintosh ADB mouses, so let's see if that code aged well!
Change-Id: Ibed2423023e821ae4ce608f0ddbc5ac32bfbd8f7
On some Thinkpads, the extra buttons are used for the trackpoint, so
they should be reported as "main" buttons, not extended ones. An
(undocumented) information query was added to the firmware to report
when this is the case, however it is not advertised as supported by the
firmware itself by the usual mechanism.
What we do is (just as the Linux driver) detect that the tocuhpad has a
PS/2 passthrough (likely used to daisy-chain a trackpoint on the same
PS/2 port) and also advertises extra buttons (an unlikely case, it is
already uncommon to even get a middle button these days...) and assume
that the information query is available then.
When the query is available and reports the quirk, the extended buttons
are reported as 0, 1, 2 (left, right, middle), instead of extra buttons
the userland would have no idea what to do with.
Change-Id: Iad5a9e140b6e49c298dcc901f4e331a4a847d7b2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* only for Intel sysenter/sysexit.
* the entry function processes stack arguments as follows:
we look up the syscall in the table, find the number of arguments.
reserve place on the stack for the arguments.
copy arguments on the stack
pop register arguments
call the syscall function
place the return value in ax and dx registers.
* TODO: we need to store the arguments somewhere for the post-syscall tracing.
* the thread exit stub is 32-bit, for the time being use hexadecimal instructions.
Change-Id: Ie5c502eb596d4fa7613d238de80643566bc19ed8
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
* The ram_disk driver was missing in the bootstrap images. Adding
it will allow the ramdisk command to work. And with a modified
haikuports.conf one might even use a ramdisk TREE_PATH.
* The virtio_net driver will probably be handy in some situations.
It is possible to get up to 8 extra buttons on synaptics touchpads.
On some Thinkpad models, these are used to implement the trackpoint
buttons (reported as buttons 4, 5 and 6). Since the touchpad itself has
no buttons (it is a clickpad), we may at least try to handle these
properly.
Change-Id: I5d4021e36fb3ac86ecf213c5666f9b6ddd3e2bca
the x86_64 compat syscall entry needs size and offset of parameters to
handle them correctly to the syscall function. struct extended_syscall_info
and struct syscall_parameter_info provide parameter count, size and offsets.
Change-Id: I7e5c7b6e19e757b28b43c3b3419b7071fae321f8
* This makes mounting volumes more stable; ie. you can put your
drive in another slot, or boot your native system in emulation, and
it will still find the drives to mount.
* The old method is still left there in order to achieve a smooth
transition.
The Flatten and Unflatten method should check the size according to the
matching FlattenedSize method, not a possibly overriden version.
May also fix#14128 since we avoid use of the vtable by doing this.
git_svn needs alien_svn, but we don't include this in the build repos.
Remove it from the preinstalled software, it is available in the depot
if people need it.
the size of BAffineTransform is architecture dependent, so we transmit
its contents in a standard array instead.
Change-Id: I907110742168846a869a48bb2d116cc5292ec7d0
use x86 as default sSearchPathSubDir in compatibility mode.
use the generic memset/memcpy when x86_64 is the primary arch.
Change-Id: Ib464c308ff97f7ae2482ef4c037de1b1bb2bf61b
the standard x86 implementation uses the commpage, which is difficult to setup. we could
also use the C++11 version instead.
Change-Id: I4be7e3466082ff2c91bc32bef377a664ce65f3fc
my.justenergy.com allows only RSA, so we can't connect there without
this. Other websites may have a similar problem.
Also improve the handling of the error, as it was giving a generic
"general system error" to the user.
Fixes#13975.
* A Node/Partition cannot be member of two lists at once. This
resolves an issue where a partition cannot be found later
due to corruption of a NodeList.
