* reading/writing interface configuration data is now working properly
* at boot, net_server will overwrite the configuration with settings retrieved
via DHCP, though
* refactoring/renaming
changes by myself:
* fixed warnings and cleaned up in Settings::ReadConfiguration(), when the
nameservers are parsed
* fixed warning in EthernetSettingsView::_SaveAdaptersConfiguration(), changed
the loop to do without "isOpen", I think it was broken in two ways before:
- it would use the fp pointer after closing the file (isOpen was not
maintained), and if that would have worked, it would have overwritten the
interface configuration saved in an earlier loop iteration, now it should
write all interfaces that are not set to autoconfigure
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22018 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_soft_fault() no longer touches the page source cache in case fault_get_page() failed.
* fault_find_page() now unlocks and releases the cache if reading in a page failed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22016 a95241bf-73f2-0310-859d-f6bbb57e9c96
forced it to use them. Now, it will filter out B_USE_RESOURCES when the resources
are invalid.
Also, _WriteData() and _RemoveData() will now fail if neither source is specified
with B_NO_INIT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22015 a95241bf-73f2-0310-859d-f6bbb57e9c96
default to having no accelerators, but that setting was not ever read
properly. So in fact the meny pref was correct, but the menus were wrong.
This fixes that.
If the default setting is supposed to be accelerators on then the settings
should be changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22011 a95241bf-73f2-0310-859d-f6bbb57e9c96
- One from Justin O'Dell which properly enables and disables the play and stop
buttons.
- One from me which doesn't crash Sounds if you try to open a file which has no
MIME type set. It previously assumed the super type would always exist.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22010 a95241bf-73f2-0310-859d-f6bbb57e9c96
* it gets all the configuration and it saves it back but for some reason,
the net_server is not noticing the changes yet
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22007 a95241bf-73f2-0310-859d-f6bbb57e9c96
occured if SIGSTOP was already delivered but not yet handled when SIGCONT was
sent. Now, SIGCONT will clear all stop signals from the pending signals.
* SIGTSTP, SIGTTIN, and SIGTTOU are supposed to suspend the thread as well, adapted
the default behaviour to respect that.
* Removed the work-around from r21997 TermParse.cpp for this exact problem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22004 a95241bf-73f2-0310-859d-f6bbb57e9c96
possibly making them a little faster too
* mess with decorator button size calculation to make the whole layout scale
more agreeable with the font size (no more fixed offsets/insets), but it
is work in progress
* DefaultDecorator no longer allocated the border color array, it is part of
the object now
* small memory footprint optimizations in ViewLayer, Decorator and WindowLayer
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* handle out of memory situations
* don't try to copy (and assign op!) in SetData if opCount/ptCount is 0
-> FontDemo doesn't crash anymore eventually when cycling fonts in outline
mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22000 a95241bf-73f2-0310-859d-f6bbb57e9c96
* get_signal_stack() checked the wrong sig_action field (index is signal-1), also,
it had an off-by-one error in the stack range check.
* factored out a restart_syscall() function to avoid code duplication
* arch_setup_signal_frame() relied on the fact that vregs and the signal stack code
is a multiple of 4 bytes in size.
* Fixed sigaction(): it did return the error code directly instead of setting errno.
* signal() actually had a work-around for the broken sigaction()...
* Replaced the sig_func_t typedef with a sighandler_t typedef - this is non-standard
anyway, but now we're at least compatible with the GNU world instead of introducing
our own solution (BSD seems to use sig_t here, BTW).
* Removed now unused sigval structure from the header; it should be added again as
soon as we start supporting it.
* SA_RESETHAND and SA_ONESHOT are the same thing; the former did not work before.
* Made the non-standard SA_* flags refer to the standard ones instead of the other
way around.
* Added a test application for various signal features - works fine under Haiku,
tested also under Linux and BeOS (the latter fails as it does not support SA_RESTART).
More tests should be added, though.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21999 a95241bf-73f2-0310-859d-f6bbb57e9c96
the PtyReader thread in TermParse hanged in read(). There's even a
comment in there (by Axel) that read() is never interrupted. Switched to
kill_thread() in TermParse::StopPtyReader() until this problem is fixed.
At least we don't leave running apps around anymore. :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21997 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't constrain clipping region until bug has been fixed.
Printing to Preview printer driver works now again from StyledEdit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21995 a95241bf-73f2-0310-859d-f6bbb57e9c96
* origin is given in "outer" coordinate system therefore if there is a
previous state it has to be transformed. Please review if this is
required in OffsetOrigin() too.
* in Transform() we have to scale relative to the view origin not (0 /
0).
- optimized SetScale: saved one division
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21993 a95241bf-73f2-0310-859d-f6bbb57e9c96
preferences apps. This fixes most of bug #254.
This is his first contribution to Haiku, and hopefully the first of many.
Thanks Justin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21992 a95241bf-73f2-0310-859d-f6bbb57e9c96
* On exec() the new function thread_reset_for_exec() is called which clears the signals
and cancels an eventually set alarm. Both things weren't done before...
* Some minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21989 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now checks if such a message is present and avoids sending B_SILENT_RELAUNCH in this case, and also in the standard case with a ref.
This fixes bug #1387
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21987 a95241bf-73f2-0310-859d-f6bbb57e9c96
doesn't fix bug #1392, since TermView::_InitObject() use std::nothrow
for allocations. Added TermWindow::_GetPreferredFonts() and moved some
code in there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21984 a95241bf-73f2-0310-859d-f6bbb57e9c96
large) vregs structure to the stack.
* Introduced a get_signal_stack() function that arch_setup_signal_frame() now uses to setup
the signal frame - it currently only returns the default user thread stack. Also made
sure arch_setup_signal_frame() is independent from the user stack.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21983 a95241bf-73f2-0310-859d-f6bbb57e9c96
as Marcus pointed out, having it outside wasn't thread safe. Moved
PicturePlayer into the BPrivate namespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21982 a95241bf-73f2-0310-859d-f6bbb57e9c96
tab label instead of "scrollView". Setting Terminal to fullscreen also
resizes and moves the TermView a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21981 a95241bf-73f2-0310-859d-f6bbb57e9c96
GPL'd code in TermApp (slightly modified, and bugfixed, even :P).
TermView now accepts an argument vector instead of a commandline. Same
thing for Shell.
Temporarily(?) removed some commandline options.
This also fixes bug #1396 (tested)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21979 a95241bf-73f2-0310-859d-f6bbb57e9c96
It seems scaling ignores the origin.
The test does not fail, but the rendered image is wrong.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21978 a95241bf-73f2-0310-859d-f6bbb57e9c96
* check against sizeof(void*)-1 instead of hardcoded 3.
* return B_NO_MEMORY instead of NULL if the allocation failed...
Thanks to Marcus and Ingo for proofreading :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21976 a95241bf-73f2-0310-859d-f6bbb57e9c96
compliant:
* it now checks the alignment is a multiple of 4 (needs to be changed for 64 bit architectures)
* it no longer sets errno.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21975 a95241bf-73f2-0310-859d-f6bbb57e9c96
if the page was already in the "modified" list before. Also, the source page (which is
either mapped directly or copied to the target page) is no longer marked busy before its
final destiny is decided (it didn't have any effect, anyway, since we had its cache
locked for the whole time, but it now preserves the modified state). This fixes bug #1369.
* vm_cache_write_modified() now filters out temporary caches (it's currently called on area
deletion).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21971 a95241bf-73f2-0310-859d-f6bbb57e9c96
* extracted a settings class from the view, now a dynamic number of ethernet
devices is handled at the same time
* resolv.conf is parsed to extract the nameservers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21970 a95241bf-73f2-0310-859d-f6bbb57e9c96
