Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
And remove Mouse, Keyboard and Touchpad.
Userguide and localizations will need to be updated.
Change-Id: I4543b2b63367cd13562c542610bad34b5934b103
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2210
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Factor in types changes (introduction of intptr_t)
- Align JamFiles syntax with in progress architectures (arm/sparc)
- Xorriso doesn't support much of the mkisofs options (anymore ?)
- (After a correct bootstrap) one should be able to build @minimum-raw and haiku-boot-cd again
Change-Id: I4f779ad8f2210389fa9b7f7c0a98c3652a64c257
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1983
Reviewed-by: François Revol <revol@free.fr>
The "exec" tool can only handle one command with environs set at
the beginning of the line, so now we set the ADD_BUILD_COMPAT...
in this format. This also seems to be a general performance
improvement to builds using real shells, too.
Change-Id: If4b3117651b5475039d5e8116cd3de398582290a
Now provided in the tnftp package.
Change-Id: I862b1ff98586aa0e5a9418cf26e30b7136140249
Reviewed-on: https://review.haiku-os.org/c/1641
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* haiku_loader.u-boot doesn't fit in fat32 like haiku_loader.ub
* Adjust when writing. Update u-boot scripts to expect new filename
* Shrink loader partition to 32M, add our filesystem to end
Change-Id: I62936526a7dea2c41e26a7c0f9e05a368622a6a3
All of Barrett's individual reverts have been squashed into this
one commit, save a few actual bugfixes.
Change-Id: Ib0a7d0a841d3ac40b1fca7372c58b7f9229bd1f0
Just does what the name says
Change-Id: I6cf23f997ce544df83d4ef2f73a3b130dea8825c
Reviewed-on: https://review.haiku-os.org/c/1432
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
This one had an uncertain "freeware" license, and the code quality
is not so great. BeOS didn't have an 'uptime' command, so we can
replace this with the coreutils one without worry.
We don't include the wpa_supplicant on the minimum image, so
these aren't very useful (it seems one needs the wpa_supplicant
to connect even to an unsecured network, with our setup.)
Anyone who needs one of these and also has a reason to use the
minimum image can easily add them back via their UserBuildConfig.
This replaces the old Haiku-native driver that was removed in the last commit.
It should support all the same chips that one did, in addition to the SiS 7014,
and the DP83815 also.
I don't have this hardware, so for anyone who does, please test.
Fixes#1657.
* Move MMU image to a real image define vs being crammed into
the u-boot bootloader Jamfile
* ARM not working yet, but better!
* x86 still builds
Change-Id: I3fb873dbac06fe2db893915b667bf3ce1df44686
The lowest model number supported by this driver is "3160", but that's just
Intel's insanity: the 7260 was released the quarter before it. So following
our naming convention strictly, "7260" is the correct name for this driver.
The firmware situation for this one is also a little different. Unlike past
instances where Intel has released mostly nonsubstantial firmware updates,
allowing us to just copy a recent-ish version from the iwlwifi archives,
the firmware is more closely tied to the driver in this series. As a result,
some of this firmware is not even used by Linux yet (they're a few versions
behind it seems), so the firmware packages included here come from FreeBSD.
One major hardware feature - RX of multiple frames at a time - is disabled
in this commit, as it depends on mbuf reference-counting, according to the
FreeBSD developers I asked, which we do not implement yet. I'll hopefully
get to looking at that in the next few weeks.
And with that, I finally have WiFi on my primary laptop, my original reason
for setting out on this quest last year. This commit was pushed through it,
even :)
Per #10267, "Most (ported) third-party software should be removed
from the Haiku source repository."
Since HaikuPorts already has the ncompress package, this file
should no longer exist.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Original patch missed modifying the "minimum" definition and the
src/bin/Jamfile, so I took care of that.
I wrote this back in 2010 as my first driver project.
Reasons to remove it:
* The license is GPL
* Current WiMAX hardware is generally WIFI based.
* It controlled the hardware, but never worked
for network access since we need SSL certs and stuff
which vendors weren't too open with.
* WiMAX kind of died (at least in the US)
I left the wwan directory, it would be a nice spot
for CDMA / GSM dongle drivers.
* Hashing semantics for the new build repositories are different than
the old ones, so update those (if the x86 build was not broken before
it is now...)
* OptionalPackages has been updated slightly (removed libtool and git_cvs
from the default images, as they are rarely used nowadays and would pull
in a bunch of dependencies we don't really care for either)
* Removed lib:libqrencode from Haiku package requires (qrencode_kdl is a
static library, the userland libqrencode is not used anywhere in the tree,
as far as I can tell)
* Fix build of JPEG2000 translator after update
* Decouple fluidsynth build machinery and remove from image now that it
is no longer used
* Update repository URL in Repositories preflet
libmedia.so was used by at least 2 apps included in the minimum image,
Activity Monitor and Deskcalc which subsequently failed to load on minimum.
Deskcalc wasn't actually using libmedia.so so I managed to get it to link and
run on minimum, however, Activity Monitor is using libmedia.so so needed it
to be present.
To fix this I added libmedia.so to the minimum image, I hope this does not blow
its size budget. (adds 1.0MB)
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
* Enables us to add an optional EFI filesystem
to the anyboot image.
* All existing anyboot behaviour is preserved.
* We still need to figure out how to build bios
and EFI loaders at the same time on x86.
* The tiny "fake ISO" still needs el-torito
alt-boot for the EFI loader to work when burned
to a CD. This makes the EFI loader work when
written to a hard disk / flash drive.
This is separate to the VESA driver, as the VESA driver requires
using the VBE BIOS. Under UEFI, we don't have the VBE BIOS, nor
are we able to switch modes after leaving UEFI Boot Services, so
a dumb framebuffer driver seemed like the easier way to approach
the problem.
The framebuffer & vesa drivers now test for the presence of the
VESA_MODES_BOOT_INFO boot item to distinguish between which driver
to use. Also added check for the VESA mode count to determine
whether to add the VESA_MODES_BOOT_INFO item.
UEFI video updated to explicitly zero out the VESA and EDID
boot data.
- B_TRIM_DEVICE on a ram disk frees all requested pages. Reading from a
trimmed page returns all 0s. This can be used with fstrim to release
memory for the parts not used by the filesystem, without unregistering
then registering the device.
- Add icon and ioctl to get it.
- Add it to the image, because it works reasonably well and there is no
reason not to include it.
The boot still crashes some time later, but at least it is easier to
test now.
- PackageFS included in the net boot archive
- Tell the system it is booted "from image" when netbooting
- Add subfolder src/kits/debugger which contains the debugger's core
functionality and lower layers. Correspondingly add headers/private/debugger
for shared headers to be used by clients such as the Debugger application
and eventual remote_debug_server. Adjust various files to account for
differences as a result of the split and moves.
- Add libdebugger.so to minimal Jamfile.
* Use BUrlProtocolRoster instead of BFileRequest.
* Removed HTTPMediaIO custom code that now inherits
BAdapterIO and make the whole thing more simple.
* It work with some formats (flv, mp3, mkv) but ffmpeg fail
on others (mp4, 3gp).
* GetSize needs improvements.
* Previous enablement broke gcc2 and hybrid builds
* gcc2 builds fixed and tested working now
* Fix Hybrid builds via missing MultiArch Jam
* Sorry for the noise, enjoy early Bluetooth support
So people aren't tempted to make .pkg files for x86_64/ARM/etc, and
because there should be no reason to have it there.
Discussed with PulkoMandy on IRC.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
This is a squash of the 42 commits by @mshlyn, as I couldn't find a
way to break them into logical chunks. I did not include these in the build,
as it appears that they only partially work anyway, and much more cleanup is
still needed. However, this is a huge improvement on what was in the tree
before, which looked horrendous and didn't even compile (as it was designed
for the old stack).
Mostly fixes#812.
* The same mechanism (and the same PostInstallScript) is used for this.
* If a file first_login exists in ~/config/settings/boot, the first-login
scripts are launched, and the file removed.
* This fixes adding the deskbar tray icons even when there is no Deskbar
running yet (for example on first boot when the FirstBootPrompt
starts), or, IOW bug #12275.
This can be used by scripts to do verious performance measurements.
Specifically it can be used to measure the boot time since it represents
the uptime.
* This directory is for services that are launched per user (in a user
context), but installed globally.
* This is now used for the default "user" configuration; before this was
put into ~/config/non-packaged/data/launch, which didn't really fit,
and has the huge disadvantage that it cannot be updated.
* Fixes part of #12227.
* Instead of launching Tracker/Deskbar directly, we now launch the
Login application.
* This will now start a new session for the selected user (the password
is currently ignored).
* When a user session is started, the launch_daemon forks, and the
child then restarts the LaunchDaemon application in user mode.
* It then registers itself with its parent, in order to resolve user
dependent services.
* Added a user launch file that will cause Tracker, and Deskbar to
start in the new session.
* Added initializing /tmp & /var/shared_memory to the launch_daemon.
* Moved clockconfig.cpp code into the launch_daemon.
* This follows systemd design; since those jobs are fixed, it doesn't
matter where you maintain them.
* The init jobs are BJobs, but the JobQueue is only used for that
one use for now. At a later time, I intend to put the job launching
in there, as well. BJob allows to represent the dependencies already.
* This is actually working already, although we cannot reproduce all
the features of the former Bootscript yet. This is without any
dependency support in launch_daemon.
* All shell activity like cleaning out /tmp, setting up the environment,
setting the time, etc. is not yet working.
These files are required for netresolv functionality, and there is no
real use in modifying them as settings files. Restore the previous
behavior, the files are stored in data and part of the Haiku package.
This means there is no need for a fresh install from image to get the
files anymore.
Fixes#12156.
libbind development was transferred to the NetBSD project at
http://wiki.netbsd.org/individual-software-releases/netresolv/
There isn't an official release yet, but they provide a set of patches
against the latest libbind release.
* Remove all files we don't use
* Merge the changes to the remaining files
* Add some new files we need
* Move getifaddrs implementation to libnetwork (instead of libbnetapi)
so it can be used by netresolv.
Fixes#8293 : netresolv uses getifaddrs to determine if there is a local
IPv6 address. If there is not, it will not return AAAA records.
* Icon-O-Matic and Cortex are dependent on the feature.
* remove expat lib from the build and from the tree.
* expat package is added to regular builds.
