Kernel doesn't use it, and it could be regenerated in the kernel if it did need it.
This also unlocks the apic range the bios can use. Previously the apic ids would have
to fit within 0..MAX_CPUS or it'd reject the cpu. Some boxes (mine in particular)
seem to sparsely populate the apic id so that the range is pretty large.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37108 a95241bf-73f2-0310-859d-f6bbb57e9c96
phys_addr_t. IOW, if PAE is enabled, that memory should be put to use now.
Apparently we report an incorrect amount of total memory (also counting
memory gaps), which also suggests that we need another method to manage the
vm_page structures (currently a huge array with indexes proportional to
physical page addresses, i.e. wasting memory for the gaps).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37107 a95241bf-73f2-0310-859d-f6bbb57e9c96
even have to be available in the generic case. See bug #6105, patch 1 & 2.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37007 a95241bf-73f2-0310-859d-f6bbb57e9c96
warnings, but also some oversights from earlier changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37000 a95241bf-73f2-0310-859d-f6bbb57e9c96
address ranges, and a set of support functions working with it.
* Changed the type of the kernel_args physical address range arrays to
phys_addr_range and adjusted the code working with those.
* Removed a bunch of duplicated address range code in the PPC's mmu.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36947 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't keep any memory mappings from the OF for the time being. We can't
keep mappings < 2 GB, since those aren't in the kernel address space and
we don't handle memory mapped registers or the like correctly either.
Ticket #5193.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36886 a95241bf-73f2-0310-859d-f6bbb57e9c96
The old mechanism to route an apic id back to a cpu id is faulty, built with the assumption that
the bios will 'pack' the apic ids from 0-num_cpus. In systems that dont do that, the code would
randomly corrupt the bootloader. Fatal in this case.
This quick fix simply rejects all apic ids >= MAX_CPUS (8). No way it would have worked before
if you had a box that started with >= 8 or anything, so it shouldn't regress any existing system.
Better solution is to allow any apic id to exist (0-255).
On this particular box the ids (from lunix dmesg):
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now it checks whether the given physical range exists at all.
* Not only check whether any range of the given size is free, but also check
whether the given range is free.
* B_BAD_VALUE is not a particularly good return value for a function supposed
to return a bool
Fixes#5911. With only 64 MB RAM the usual debug syslog buffer location may
be outside the actually existing physical memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36632 a95241bf-73f2-0310-859d-f6bbb57e9c96
it failed...).
* Moved IRQ table reading much earlier (before starting to program the I/O
APIC), though it currently fails, possibly because the device manager isn't
up yet, and there is no embedded controller driver.
* The kernel now enables I/O APICs by default, but the boot loader disables
them - you can now enable them using the safe mode menu, but it currently
won't have any (positive) effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36293 a95241bf-73f2-0310-859d-f6bbb57e9c96
the default setting for the "debug syslog" feature (can still be overridden
in the boot loader). Per default enabled for kdebug level >= 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35884 a95241bf-73f2-0310-859d-f6bbb57e9c96
support file creation.
* Extended open() and open_from() to support O_CREAT to create files.
open_from() has got an optional "permissions" parameter for that purpose.
* Fixed errno. It would crash when being used. Also changed the POSIX functions
to return their error code via errno as expected.
* Added writev().
* FAT file system:
- Added support for reading long file names.
- Added support for creating files (8.3 name only) and writing to them.
- Enabled scanning partitions with it.
* Boot loader menu:
- Enabled the "Reboot" menu item unconditionally.
- Added "Save syslog from previous session" menu item to the debug menu.
Currently saving the syslog to FAT32 volumes is supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35882 a95241bf-73f2-0310-859d-f6bbb57e9c96
contribute significantly to the usable memory, but possibly make the MTRR
setup impossible. Might improve #5550.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35825 a95241bf-73f2-0310-859d-f6bbb57e9c96
machine the previous location was overwritten, probably by GRUB.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35817 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel syslog ring buffer is no longer emptied by the syslog sender
thread. Instead we only drop the oldest data from the buffer when we're
writing to it and there's not enough free space in it.
Advantages: We drop old data rather than the most recent data when the buffer
is full. The "syslog" KDL command has more data available now. So the odds
are that kernel syslog messages not written to disk yet are at least still
in the kernel buffer.
* Changed dprintf_no_syslog() semantics: Now it writes to the syslog, but
doesn't notify the syslog sender thread.
boot loader:
* Added the ring_buffer implementation and a dummy user_memcpy().
* bios_x86: Moved the syslog stuff from serial.{cpp,h} to debug.{cpp.h}.
* Moved the debug options from the "Select safe mode options" menu to a new
"Select debug options" menu.
* Added option "Enable debug syslog" to the new menu (ATM available on x86
only). It allocates a 1 MB in-memory buffer for the syslog for this session
in such a way that it can be accessed by the boot loader after a reset.
* Added item "Display syslog from previous session" to the new menu, doing
what its name suggests.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35816 a95241bf-73f2-0310-859d-f6bbb57e9c96
gKernelArgs.physical_allocated_range array. This way it is always up to date
and we don't need to fix it in mmu_init_for_kernel().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35802 a95241bf-73f2-0310-859d-f6bbb57e9c96
providing incorrect memory types. It doesn't cost us anything, since the
kernel reserves all but the unusable range later anyway. Should fix#1925.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35736 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the page table allocation more flexible. Got rid of sMaxVirtualAddress
and added new virtual_end address to the architecture specific kernel args.
* Increased the virtual space we reserve for the kernel to 16 MB. That
should suffice for quite a while. The previous 2 MB were too tight when
building the kernel with debug info.
* mmu_init(): The way we were translating the BIOS' extended memory map to
our physical ranges arrays was broken. Small gaps between usable memory
ranges would be ignored and instead marked allocated. This worked fine for
the boot loader and during the early kernel initialization, but after the
VM has been fully set up it frees all physical ranges that have not been
claimed otherwise. So those ranges could be entered into the free pages
list and would be used later. This could possibly cause all kinds of weird
problems, probably including ACPI issues. Now we add only the actually
usable ranges to our list.
Kernel:
* vm_page_init(): The pages of the ranges between the usable physical memory
ranges are now marked PAGE_STATE_UNUSED, the allocated ranges
PAGE_STATE_WIRED.
* unmap_and_free_physical_pages(): Don't free pages marked as unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35726 a95241bf-73f2-0310-859d-f6bbb57e9c96
which happened on some systems (mine included).
Should close ticket #5341.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35441 a95241bf-73f2-0310-859d-f6bbb57e9c96
Entering the boot loader menu has changed/simplified while reducing the boot time by .75 seconds.
Now it is enough to hold one of shift/Esc/F8/F12/Space. Thanks!
I've also updated the boot loader documentation to reflect the change, but I only mentioned holding shift.
I know that changing the documention directly is not preferred anymore, but I wanted to make sure this
patch is complete.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fix the boot net stack's IPService to base the calculation payload size
on the IP-indicated packet size instead of the Ethernet payload.
Thanks a lot! Fixes ticket #5234.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35016 a95241bf-73f2-0310-859d-f6bbb57e9c96
don't need it. That prevents us from ending up with the page being mapped
multiple times (under VMware at least) and thus fixes#5208.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34948 a95241bf-73f2-0310-859d-f6bbb57e9c96
allocate all pages the given range intersects with. When not page aligned
it could fail to allocate the last page.
* mmu_free():
- Adjusted semantics to be compatible with mmu_map_physical_memory().
- The validity check was broken, because page number and addresses were
mixed, and because KERNEL_BASE + kMaxKernelSize doesn't mark the end of
the allocated virtual ranges.
- The final check against sNextVirtualAddress was broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34947 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed coding style issues pointed out by Axel.
* Fixed potential buffer overflow and fault in default-client-up code path
(OF counts terminating zero char, too).
* Added an intermediate fallback to parsing the boot path
* Added himself to the copyright holders
Thanks a lot! Fixes ticket #5189.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34918 a95241bf-73f2-0310-859d-f6bbb57e9c96
available in the boot loader.
* Simplified parse_ip_address() and use style conforming identifiers.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34870 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Skip mappings to non-physical memory in the PPC MMU code. Gets the
PPC kernel booting a little further.
Thanks! Fixes ticket #5193.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34863 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel's _start entry function expects now a second argument, the
current CPU index. The PPC boot loader didn't initialize GPR4, passing
its second argument, the kernel entry address, as CPU index, causing
smp_cpu_rendezvous() to loop forever. This fix gets the PPC boot to a
kernel debug prompt. The CPU index is currently fixed to 0.
Thanks a lot!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34854 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Choosing Reboot from the menu will now reboot the system instead of
returning to the OpenFirmware prompt. Places, where returning to the
prompt was desirable have been adapted to maintain their current behavior.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34852 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If retrieving an IP address from the non-standard /chosen/dhcp-response
fails, try to parse it from /options/default-client-ip instead.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34850 a95241bf-73f2-0310-859d-f6bbb57e9c96
the function shall nevertheless return the length of the string that would
be written, if the buffer were large enough.
Added a touch of C++ while doing that. :-)
* Fixed the instances in boot loader, kernel, and kernel modules where the
wrong semantics were expected. The majority of uses actually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34826 a95241bf-73f2-0310-859d-f6bbb57e9c96
* static variables should start with s.
* function blocks should start on new line.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34668 a95241bf-73f2-0310-859d-f6bbb57e9c96
This saves ~0.5s of boot time here, but I suspect it might be better for CD.
Enabled loadSymbols in kernel settings so the behavior should be the same as before this change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34666 a95241bf-73f2-0310-859d-f6bbb57e9c96
replaced the previous, somewhat complicated and inexact method of
computing the TSC conversion factor using it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34542 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed realloc() - "size" wasn't what I thought it would be.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34412 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When DEBUG_SPINLOCK_LATENCIES is 1, the system will panic if any spinlock is
held longer than DEBUG_LATENCY micro seconds (currently 200). If your system
doesn't boot anymore, a new safemode setting can disable the panic.
* Besides some problems during boot when the MTRRs are set up, 200 usecs work
fine here if all debug output is turned off (the output stuff is definitely
problematic, though I don't have a good idea on how to improve upon it a lot).
* Renamed the formerly BeOS compatible safemode settings to look better; there
is no need to be compatible there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33953 a95241bf-73f2-0310-859d-f6bbb57e9c96
checked the existence of the apics.
Moved the code to disable the local apic from arch_timer.c to arch_int.cpp, so
we also avoid installing the interrupt handler for it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33149 a95241bf-73f2-0310-859d-f6bbb57e9c96
Same for the IOAPIC, but commented out the code, since we're not using the
IOAPIC yet.
Also renamed the option to "Disable LOCAL APIC", since it's more correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33147 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved device_manager/settings.cpp to debug/safemode_settings.cpp.
* Removed the somewhat hacky concatenation of kernel settings and safemode
settings in the boot loader. Instead, get_safemode_option() will now fall
back to the kernel settings, if it couldn't spot a setting in the safemode
settings. This allows for more control, and also makes enabling serial
debug output actually work (ie. overriding the kernel settings via safemode
options).
* Adjusted debug_init_post_vm(), and smp_init_other_cpus() to use
get_safemode_boolean().
* Therefore, I added safemode_settings.cpp to the boot loader as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32685 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add assembler code to actually jump to the kernel.
The terminal now says:
kernel entry at 80048228
PANIC: acquire_spinlock: attempt to acquire lock 0x8012a59c with interrupts enabled
Welcome to Kernel Debugging Land...
Thread 0 "" running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32408 a95241bf-73f2-0310-859d-f6bbb57e9c96
Turn off interrupts at loader entryn and make sure the mmu is disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add support for boot splash, only for PXA.
Disabled for now as it forces the framebuffer onto some useful data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32399 a95241bf-73f2-0310-859d-f6bbb57e9c96
