Remove the InstallerInitScript (it does nothing) and the
InstallerFinishScript (it does too many things). Instead implement the
finishing directly in Installer. Separate writing the bootsector, so
that the "write bootsector" menu writes only the bootsector.
Fixes#16303
- libicule and libiculx do not exist anymore in newer ICU versions
(harfbuzz replaces them), but we didn't actually use them, so remove
them from the build feature and from the package dependencies
- Add namespace usage marcos since the newer ICU packages put ICU things
in a namespace, making it easier to have multiple versions of ICU used
side by side.
No functional change intended, but this makes it possible to build the
code with either ICU 57 (for gcc2) or 66 (for other architectures).
Change-Id: I90a9440898994459f8d6de922a3f363fbeddaaf4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2974
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* boot.scr was growing past Jam MAXLINE and was causing segfaults
* Break out to tree, data/boot could be used for other arches
* boot.scr is getting a bit complex, but supports the old
u-boot haiku_loader, as well as u-boot starting our EFI loader.
Change-Id: I93a3167ab0bc78747c1d70fedd08595e9ac89662
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2963
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Stub out makebootable like on u-boot
* Place haiku_loader.efi at EFI/BOOT/BOOTXXX.EFI
* Generate boot.scr for u-boot + EFI
* haiku-mmc.image now attempts to auto-boot in qemu-system-arm
* Same code paths should roughly apply for arm64,riscv,etc
Change-Id: I563ebd77422d9e5dfcfeeedadcbc60471e8a57f4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2938
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This should 'fix' the arm build
* No longer parse FDT in bootloader, just pass ptr.
* The EFI loader doesn't load yet on arm
* It compiles though. Ship it!
Change-Id: I7c8ce588298dfaf4fba8054c6b6d9a92733b5943
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2903
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ibce15f70e20ea010937edb0a297d220c4e5a7af2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2817
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is the partitioning system used on sparc machines.
Confirmed working with a Solaris install iso image.
Added to the haiku package for sparc and to haiku_extras for other
architectures.
Fixes#15638
Change-Id: I0584bef5e6a66eff9a33eb6675d5533cc9a45d1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2709
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This pulls in the final translations for applications for R1/beta2,
and also the new HaikuWebKit.
Change-Id: I2bfb8933dcf35239f6962f8bee2dea507dec6fd5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2869
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Each TCPEndpoint has two BufferQueue members, one for the send queue
and one for the receive queue.
If DEBUG_BUFFER_QUEUE is enabled, then most methods of BufferQueue
call BufferQueue::Verify(), sometimes twice. This member function
performs some sanity checking which requires iterating through every
net_buffer in the queue.
Disabling this in a debug build improved throughput by a factor of 5x
over the loopback interface on my laptop. Using iperf the measured
throughput went from 900Mbps to around 4.8Gbps.
This patch turns this sanity checking off for release builds.
* Rename DEBUG_BUFFER_QUEUE to DEBUG_TCP_BUFFER_QUEUE
* Change the default in BufferQueue.h to disabled
* Set DEBUG_TCP_BUFFER_QUEUE to KDEBUG_LEVEL_2 in
kernel_debug_config.h
Change-Id: I262dac5d7e2889d2942bbdcf6b667cc0cbafa4c8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2780
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It does have a performance impact (as it serializes all VMCache
creations), and it is not that useful, so move it to KDEBUG_LEVEL_2
so that the beta releases (on KDEBUG_LEVEL_1) are not affected
by it.
(The nightlies are on KDEBUG_LEVEL_2, so this will not affect
them.)
Change-Id: Iab35d58f9d210651e3fd9027b75ea27a7a6928e5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2612
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Also remove the MINGW support, as it was far too incomplete.
This *should* work under case-sensitive NTFS, but instead,
it seems #14963 occurs. So perhaps there is a GCC bug
related to case-sensitive vs. case-insensitivity after all.
for Development: automake and autoconf require perl
for DevelopmentMin: makefile_engine requires make and mkdepend
Change-Id: Ica2bace17a233e2e589e139208e468870b1cc84e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2507
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Notable changes:
* jpeg replaced with libjpeg_turbo across the board.
* man replaced with mandoc.
* ilmbase merged into openexr.
* gnutls no longer needed in this set.
A few other packages unused in the local scripts were
also removed. Build fixes are in following commits.
Previously, all packages on the image, both activated and unactivated,
were in $systemPackages, so if a package actually in /system/packages
had a dependency in the Installer optional package area, the dependency
checking would see no problem but the generated image would be broken.
Now, packages going into /system/packages are treated separately
from those going elsewhere, and error checks added so the above
condition will not occur.
(I ran into this while working on the build-package upgrade
in the following commits.)
Should constitute a minor performance gain, with no functional change
(the kernel ELF loader does not do any semantic interposition; or
any interposition for that matter.)
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I23db3cbb57fea1f9346db9477f72bcc164794926
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2282
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This is the bulk of the work. Anything else should be
minor cleanups and tweaking.
* riscv64 isn't a viable EFI platform yet.. just acting
as a stand-in to test a non-x86 EFI haiku_loader
Change-Id: Ib03de81e2b562e693987b86d7b4318209fb1c792
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2256
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Change-Id: Idc50cfee16db5f7c0dbea625a7739ad42b2d7bf0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2249
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* "xorriso doesn't support much of the mkisofs options"
* Dropping the hfs map made our bootloader no-longer get
mapped as :tbxi which means qemu + Apple devices refused
to boot it.
* Switch to genisoimage which can generate the correct image.
(xorriso -as genisoimage doesn't work either)
Change-Id: Id71b97796f5004f6ddf6244644c51a5787f9bf8e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2241
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
And remove Mouse, Keyboard and Touchpad.
Userguide and localizations will need to be updated.
Change-Id: I4543b2b63367cd13562c542610bad34b5934b103
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2210
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Signed-off-by: Jaroslaw Pelczar <jarek@jpelczar.com>
Change-Id: Ie043af5b7471f626a1ffe100848151c832dcc439
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1853
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Needed for the sparc port, allows to build elf2aout which uses err() and
errx(). Allows to build the sparc port from Haiku.
Change-Id: Ia14dd9b1be1c03b36634a675f1a51eeac8d4aacf
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2129
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Factor in types changes (introduction of intptr_t)
- Align JamFiles syntax with in progress architectures (arm/sparc)
- Xorriso doesn't support much of the mkisofs options (anymore ?)
- (After a correct bootstrap) one should be able to build @minimum-raw and haiku-boot-cd again
Change-Id: I4f779ad8f2210389fa9b7f7c0a98c3652a64c257
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1983
Reviewed-by: François Revol <revol@free.fr>
* Add a link to the Quick Tour to the desktop.
* Remove the Welcome page from desktop. We don't want to clutter
the user's desktop more than necessary. As "Home" page of
WebPositive, it's still very visible.
* Mention the Quick Tour in the Welcome package description.
* Add a "quicktour" script similar to the welcome/userguide
that opens the online version if it's not installed locally.
* Add icons to the userguide and quicktour scripts. Fixes#14706.
* Add bookmark and launcher for the Quick Tour.
Adjust the AddFileDataAttributeRule to create its temporary file in
the "common" architecture, the file is not architecture specific.
Add a rule PrepareScriptWithIcon in src/data/bin/Jamfile to assign
an icon and make the script executable.
Change-Id: Ia7604ff4715a5aaf9a645c1b3333a954d6a4dafc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1924
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
So many Jamfiles to search through...runs also, but there
are lots of graphical glitches
Change-Id: Ibf9e64566a5b8c5742792ac9b1b0f9ccc6693c8d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1753
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The "exec" tool can only handle one command with environs set at
the beginning of the line, so now we set the ADD_BUILD_COMPAT...
in this format. This also seems to be a general performance
improvement to builds using real shells, too.
Change-Id: If4b3117651b5475039d5e8116cd3de398582290a
Change-Id: I8084e0fa2ffbaf04242fa14617807d83abbd5586
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1556
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This makes pkgman functional in minimum-profile images.
Change-Id: I3578886743fecbf76779ac1b4b76762d8ce1be3d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1715
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Now provided in the tnftp package.
Change-Id: I862b1ff98586aa0e5a9418cf26e30b7136140249
Reviewed-on: https://review.haiku-os.org/c/1641
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: If11a892665d08f61c46b5a6a5b4bf0453225c3ee
Reviewed-on: https://review.haiku-os.org/c/1533
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* haiku_loader.u-boot doesn't fit in fat32 like haiku_loader.ub
* Adjust when writing. Update u-boot scripts to expect new filename
* Shrink loader partition to 32M, add our filesystem to end
Change-Id: I62936526a7dea2c41e26a7c0f9e05a368622a6a3
* For tracking, there are *mega* hacked together using
llvm's linker and functionality isn't a sure thing.
* Thanks waddlesplash for the sketchy changes :-)
* Hopefully gets non-bootstrap arm builds working again
and let us work on the toolchain without blocking arm
development.
Change-Id: I0617ed83cc757d098e6464222405f75eed91196e
I am using this to use clang+lld for linking on ARM builds,
which seems to be more tolerant than binutils ld is, and
gets the build a bit farther for now.
We always want to use the shared one from the syslibs package,
never the shared one from this build.
Part of #14842: after this change, the ICU build now fails with
"cannot find libstdc++" instead of an invalid symbol.
* After the gcc 8 upgrade, during bootstrap sources attempt to
load limits.h from gcc before they use our limits.h override
resulting in undefined NAME_MAX, PATH_MAX, etc.
Change-Id: I9204410d0543a033e262124eaf7bcde09db26aa9
Reviewed-on: https://review.haiku-os.org/c/1498
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
It warns on snprintf's output "possibly" being truncated (e.g.,
two B_PATH_NAME_LENGTH chars being concatenated together) which may
be exactly the behavior the programmer wanted. So that's not very
helpful.
All of Barrett's individual reverts have been squashed into this
one commit, save a few actual bugfixes.
Change-Id: Ib0a7d0a841d3ac40b1fca7372c58b7f9229bd1f0
Just does what the name says
Change-Id: I6cf23f997ce544df83d4ef2f73a3b130dea8825c
Reviewed-on: https://review.haiku-os.org/c/1432
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
Very simple for now, just reuses the Haiku one with some gradients
removed.
Add it to the haiku_extras package.
Change-Id: I41729ed65b147fed72bf56e7c5c89367b75563bb
Reviewed-on: https://review.haiku-os.org/c/1431
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The variable is used after a "cd" so it must be absolute.
Change-Id: I8d591b8642179603249ac56a1fcac082f29c870c
Reviewed-on: https://review.haiku-os.org/c/1387
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* I added this early on, but to be honest, any interesting
workstation class hardware would be riscv64.
* Since riscv32 is mostly embedded or low power, just drop.
Change-Id: Id36274c882c46e766268f2ab53eb1bd5f95227be
Reviewed-on: https://review.haiku-os.org/c/1352
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
By default, all targets support the "haiku" platform, and we no longer
support building for BeOS, Dan0, Zeta, or other BeOS-compatible targets,
so this is no longer needed.
Also remove all references to the non-Haiku compatible platforms, and
change all BEOS_COMPATIBLE checks to HAIKU_COMPATIBLE. Removal of
all SetSubDirSupportedPlatformsBeOSCompatible invocations
will be in the next commit.
This one had an uncertain "freeware" license, and the code quality
is not so great. BeOS didn't have an 'uptime' command, so we can
replace this with the coreutils one without worry.
Change-Id: I7aef31e72a826936c45e3644a72eb0598386f1ae
Reviewed-on: https://review.haiku-os.org/c/1309
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: Ia2a86d8814d06950ea2d2d19d966c642d26f81d6
Reviewed-on: https://review.haiku-os.org/c/1302
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
On x86 and x86_64, this warning is never emitted because it is perfectly
fine to do unaligned access. On sparc, such accesses are not supported
by the hardware and will generate a SIGBUS. This must be caught by a
trap handler, and the unaligned access performed there, slowly, using
byte by byte access.
However, making this a Werror is annoying because it will trigger
everytime one casts a byte pointer to something larger, even when
alignment is actually preserved. So, removing all such warnings would be
nearly impossible (for example, just for the mergesort function, there
is a whole GSoC project for it at FreeBSD).
Keep it as a warning for now. The warning can be silenced by using
BytePointer, if desired. We should also investigate where the SIGBUS
trap is triggered a lot and consider improving the alignment of data
where possible.
Change-Id: I6b90025e8c6d69ef1ccda3c10eee270ccc1ebd29
Reviewed-on: https://review.haiku-os.org/c/1103
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Some operating systems only ship with Python 3 and the
binary for this is 'python3' instead of 'python' which
causes the Jam build process to fail because it expects
to find 'python'. This change will mean that the
configure process will detect this case and configure
the build to use the correct binary name.
Fixes#14938
Change-Id: I30cd0df828792715a54d760b86dd79aee04e2b2f
Reviewed-on: https://review.haiku-os.org/c/1134
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Use the latest version of the compiler for bootstrap.
Change-Id: I43639b560de2d4f3dc3fed48c3d4bd32a544cb57
Reviewed-on: https://review.haiku-os.org/c/1104
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
This went through review too fast, the wrong variable name was used so
the package name was not listed...
Change-Id: I81d4aa57fdb65297ae9f63ebf123d7a6395a99b6
Reviewed-on: https://review.haiku-os.org/c/1109
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
There seems to be a problem with the way we set the gcc_bootstrap
package build to depend on the bootstrap package with haiku headers.
If said package cannot be built (for example some definitions are
missing for a new architecture), we end up passing an empty string as
the package to use to haikuporter.
The error message given by Haikuporter is confusing, and not easy to
investigate. So, intercept the error earlier to save time for the next
person to hit this problem.
Change-Id: I64f326e5cb3bb0d44632864ad38ad10bb88d0c7b
Reviewed-on: https://review.haiku-os.org/c/1082
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Gets the stage0 bootstrap to run.
Imlementation is probably nonsense at this point.
Change-Id: I10876efbb54314b864c0ad951152757cdb2fd366
Reviewed-on: https://review.haiku-os.org/c/1061
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It warns when you try to use some standard library functions
without including the system headers, which we don't
care about as we are providing the system headers in the tree.
This just stops the errors from occuring rather than trying to
rebuild the files at all. This is much cleaner, and solves
a few cases that the other method did not.
Let's make the nightly builds consistent in a way that they would always
be recognized by libosinfo (and, consequently, by GNOME Boxes,
virt-manager, virt-install, ...) by explictly using "nightly" instead
of the $(HAIKU_VERSION) when generating nightly builds.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change-Id: I6fc4f15be1e8e9244abf14e75308fc825f37b2e8
Reviewed-on: https://review.haiku-os.org/c/1053
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The current volume-id is "bootimg", does not matter which version of
haiku nor to which architecture the ISO is targetting.
Having a "too generic" name as volume-id directly affects the ISO's
recognition by libosinfo.
From now on, let's use:
haiku-$(HAIKU_VERSION)-$(TARGET_ARCH)
Which would generate an ISO with volume-id as:
Volume id: haiku-default-r1~beta1-x86_64
Fixes: #14695
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change-Id: I25e2f5338403058a363872abd196d698764cc3c1
Reviewed-on: https://review.haiku-os.org/c/1034
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Our implementation of it now behaves properly after the last commit.
Change-Id: I6bebc91ae0f9512ea07ad6a7a4ccea9ee758e01b
Reviewed-on: https://review.haiku-os.org/c/908
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It has been unused since 2010, when the usb_port printer transport
was rewritten to use the USBKit.
Change-Id: I224e07fb35cd9696c07b8f22dd51d3c67d92e0a9
Reviewed-on: https://review.haiku-os.org/c/869
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Now that HAIKU_TOP is a relative path, nearly all paths Jam actually
has to deal with will never contain spaces, so this is now feasible.
Only one issue remains after this commit (namely, setting
HOST_BUILD_COMPATIBILITY_LIB_DIR.)
As Jam prints the entire erring command on failure, including this if-test
in the command itself makes the output somewhat difficult to decipher.
So instead we use two separate rules based on whether or not NO_DOWNLOADS
is set or not.
We don't include the wpa_supplicant on the minimum image, so
these aren't very useful (it seems one needs the wpa_supplicant
to connect even to an unsecured network, with our setup.)
Anyone who needs one of these and also has a reason to use the
minimum image can easily add them back via their UserBuildConfig.
It seems that not all Linux distributions ship an EFI-enabled
cdrtools (i.e. mkisofs takes -e option), Arch being one that
does not.
So instead, we now use xorriso universally, which is
as (or more, in most cases) widely available, and supports
emulating mkisofs with the EFI commands universally.
This also has the added benefit that we can drop genisoimage
support altogether.
FreeBSD 12's net80211 layer contains only 2 small KPI breaks from FreeBSD 11,
so we can upgrade it, apply those 2 changes to the drivers which are affected
(as the changes are in some lesser-used functions), and then upgrade all drivers
one at a time.
FreeBSD 12 has no major changes to the ifnet KPIs that constitute a
source compatibility break, save a single one related to locking
which doesn't really apply to us, and so we don't need to create
a "freebsd12_network" directory to work through the upgrades.
This replaces the old Haiku-native driver that was removed in the last commit.
It should support all the same chips that one did, in addition to the SiS 7014,
and the DP83815 also.
I don't have this hardware, so for anyone who does, please test.
Fixes#1657.
- USB pen drive seems to still work. More extensive testing welcome.
- USB floppies don't work yet, but they don't work anymore with the
current driver, either. I'm still investigating that part.
Fixes#9276
Change-Id: I8aa5ab828ad2ad867d0c187062d6e179372fc2ad
Reviewed-on: https://review.haiku-os.org/747
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
In some LTO-related experiments, it came out empty due to GCC
not generating actual assembly but rather intermediate code,
resulting in various later targets failing with quite literally
thousands of errors.
I added this here so that one could set -Wextra in BuildConfig and
not be bombarded with useless warnings; but it seems that GCC2 chokes
on it instead of ignoring it. Oh well.
This doesn't fully work yet (the FS code in libroot_build
needs to be adapted, as some of the symlink-related calls
are not available on MinGW), but it gets much further than
the "Cygwin" target did.
These have been broken for a long time. Some Cygwin changes that
are relevant on MinGW are kept here, but users on Windows who
want to build Haiku should probably use WSL at this point.
However, now that we are using relative paths and don't need
to worry about drive path kludges, it's actually possible to
get some host tools built on MinGW. Changes for that coming.
We need to force -m32 here, and we also need to tell Clang that we
want to allow relocations in .text.
Clang builds now get to kernel entry, but the bootloader fails to
load the early-boot modules with strange remapping errors, and so
panics with "get boot partitions failed!"
The generic CCFLAGS are already appended to the HAIKU_KERNEL_*FLAGS
and HAIKU_BOOT_*FLAGS, so these were just duplicates. And now that
we strip certain flags out of the base ones, this was incorrect
(and causes Clang to error in some circumstances.)
* Move -fPIC to ccBaseFlags, as we don't want it in ASFLAGS.
* Remove -fPIC from BOOT_CCFLAGS, as we never want it in there.
* Move EFI flags to the actual EFI setup location.
Clang doesn't support -maccumulate-outgoing-args, -nostartfiles
is not needed in LDFLAGS (and lld doesn't know about it anyway),
and Clang uses .dynstr so we need to copy it also.
The paths to tools are relative to cwd, and HAIKU_ABSOLUTE_OUTPUT_DIR is
not necessarily the same as that, in the case where jam is invoked from
the repository root instead of a "generated" directory.
HOST_OBJECT_BASE_DIR is relative to pwd also, so just make it absolute.
Change-Id: I2aef83804be31c3c03c8577d56372f2dc6cb77f8
Reviewed-on: https://review.haiku-os.org/718
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* First re-fix of what was reverted in 85f8e7001
* haikuporter calls these during bootstrap and needs absolute paths
Change-Id: I40f1b15ffd474d3286356f3151eacd9a4a09add2
These data files are used in the generation of build targets,
so moving them to src/data alongside the package_infos & etc.
makes more sense.
They don't seem to be activated properly though (I added some tracing
to try and figure out why they aren't used but haven't gotten to the
bottom of that yet.)
This reverts commit 030d0eb58f.
It is absolutely not correct to assume PWD is the generated dir;
it may also be the repository root.
Fixes jam putting some build artifacts in the source tree.
* I mean, qemu 3.0 supports it.
* Nobody get excited, we need all the triplets added to
our gcc buildtools. clang 7.0 seems to be cool with riscv though.
Change-Id: I17728163e4f28a3c16cee482a253364724b06f3a
* The PWD's are live based on jam run location which means
they shouldn't bind the generated directory to a fixed path
as before.
* We also need an absolute LD_LIBRARY PATH since haikuporter
loses the context invoking host tools.
* I don't think we can run jam from outside of the generated
directory anymore... but I don't think that was a thing.
Change-Id: I020f902ce5235bf268c9075d6e2ae85296a4ad20
* haikuporter's cwd is the haikuporter path during execution
(haikuporter/HaikuPorter)
* We have to pass the full working path and can't use a relative
path here
* Seems to fix the bootstrap build
Change-Id: Ibb139f164c5e08eda3a08136c4e9ea2c9eaeae9e
Strictly POSIX-compliant shells (like dash) do not allow sourcing
files in the present directory without "./". The script really should
not know or care about what directory the passed files are in,
so now we add a jam grist to make the passed paths absolute.
Fixes the build on all systems where /bin/sh is dash or a similarly
POSIX-compliant-no-extensions shell (i.e. virtually all Linux.)
Curerntly contains support for amiga RDB and Apple (PPC) partitionning systems,
that is, things that might be useful, but not for most users, and was
not part of the default package.
Naming inspired from the Extras disk shipped with Amiga Workbench, for
lack of a better idea.
Change-Id: I57fb229806139939bc019e6c43b0aec7ea1f483a
Reviewed-on: https://review.haiku-os.org/652
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* We're making the assumption about EFI here, but it's
fine since those defines will just go unused on non-efi builds.
* Jam segfaults when we get two for's, a case, and an if deep.
(adding an x86_64 check to efi section just below)
Change-Id: Id98e87b6570ddc7d9c2195cd05b0526e71771675
* Move MMU image to a real image define vs being crammed into
the u-boot bootloader Jamfile
* ARM not working yet, but better!
* x86 still builds
Change-Id: I3fb873dbac06fe2db893915b667bf3ce1df44686
Previously only the "effective revision", i.e. the hrev by itself,
was used. Now we include the "commits ahead" count and the "dirty" flag,
if they're there, using _ instead of - of course.
Change-Id: I5238d01926c2cca242bffbdef30bff606a173a06
Reviewed-on: https://review.haiku-os.org/596
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
(cherry picked from commit e7c5d994267fb7d49e3dd50c2854e9b37c9ffca1)
Reviewed-on: https://review.haiku-os.org/597
We don't want to ship these images as the ones for main distribution,
but at least we can make them available as downloads for those who do want
to use CDs.
* This gives us plenty of space for source packages.
* A Mini-DVD is 1.4 GiB, and USB sticks of 2 GiB are at
the sweet spot of low-price vs size.
* Unused space will be compressed in release zip.
* We blew by 700 MiB long ago. Sorry CD-R folks.
Change-Id: I3bbe4508777027f6fe7c0ee2992637541feeb88f
When HEAD is tagged, the output will be identical to what it was
before (the latest hrev tag and nothing else.) When HEAD is not tagged,
and the most recent tag is further back, we now use a format like this:
hrevXXXXX+N(+dirty)
... where N is the number of commits since hrevXXXXX, and +dirty is added
if the working tree is dirty. This is significantly shorter than the
previous model (as it does not have the Git revision.)
Fixes#14445.
Change-Id: Ide7f66cf0ac1c1f05402afc52b6be3b68b66d6dc
Reviewed-on: https://review.haiku-os.org/566
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* PRE_BETA_2 is now the default in master.
* For libbe: R1/alpha4 used internal=8, but nobody bumped master
at the same time, so now we are on internal=9.
It is just straight up broken on most systems without this, as
the same "cast specifies signature type" appears there too.
Exactly why this fixes the problem does not appear to be any more known
than it was when this was first instated in 2012.
The latter is not just a symlink to the former, but is a small pseudo-
library that tells the linker to use the .so.1 version instead. As we
do not pass -L to this directory to the linker invocation, the linker
thus cannot find it, and so errors out.
We rightly do not want the linker doing "magic" things for us that
we don't expect, and so even if this one case is fine, we shouldn't
allow the linker to take care of this automatically for us when
it comes to libroot and other core system functionality, especially
as going forward we may indeed add a second libgcc version due to ABI
breaks. Instead, link against .so.1 directly.
Fixes the build breakage caused by the GCC 7 bump.
We now build libicns against it. It seems that it is better-maintained than
JasPer, so we should probably consider switching the JPEG2000Translator to
use it also.
