Sparcv9 runs Openboot in 64 bit mode, which means the cell size is
64bit. Use intptr_t where appropriate to make the open firmware calls
work.
Beware, some values are still 32bit, this matters for example for
of_getprop, if you get 32bits into a 64bit variables it will be in the
MSB of it (big endian only weakness...) and confuse things. See for
example in console.cpp, where the input and output handles are retrieved
as 32bit values. It seems wise to check the expected size when using
of_getprop in these cases, instead of just checking for errors.
Change-Id: Ie72ebc4afe7c6d7602a47478f0bfb6b8247004b8
Reviewed-on: https://review.haiku-os.org/c/1369
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Before this commit, *all* ConditionVariable operations (yes, all;
even Wait, Notify, etc.) went through a single spinlock, that also
protected the sConditionVariableHash. This obviously does not scale
so well with core count, to say the least!
With this commit, we add spinlocks to each Variable and Entry.
This makes locking somewhat more complicated (and nuanced; see
inline comment), but the trade-off seems completely worth it:
(compile HaikuDepot in VMware, 2 cores)
before
real 1m20.219s
user 1m5.619s
sys 0m40.724s
after
real 1m12.667s
user 0m57.684s
sys 0m37.251s
The more cores there are, the more of an optimization this will
likely prove to be. But 10%-across-the-board is not bad to say
the least.
Change-Id: I1e40a997fff58a79e987d7cdcafa8f7358e1115a
Even on 64bit CPUs it's a 32bit register.
Change-Id: I9a4de6eec225de19a90d70fae1382b662e530629
Reviewed-on: https://review.haiku-os.org/c/1625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
B_OS_NAME_LENGTH is 32, char* is 8 (on x64), and this structure
has quite a lot of pointers in it so it is not like we really
needed to save those 24 bytes. Hitting malloc() in here is not
so great, especially because we usually have B_DONT_LOCK_KERNEL_SPACE
turned on, so just inline and avoid it.
Change-Id: I5c94955324cfda08972895826b61748c3b69096a
This was (following the packagefs changes) the number-one (by call
count) consumer of malloc() during the boot -- 52866 calls, and 100%
of them either 1024 or 1025 bytes!
Virtually all of these are ephemeral (indeed, the object_cache
stats after a boot with this patch shows there is only a single slab
of 64 buffers allocated, and most of them unused), so this is
probably a significant performance boost.
Change-Id: I659f5707510cbfeafa735d35eea7b92732ead666
If the buildbots were working, I would have been informed of this
about an hour after I committed it last night. But it seems they aren't.
Maybe kallisti5 will have some more incentive to work on that?
Cleans up some lock/get/unlock sequences, and makes it possible
for external consumers to get team structs (which will be necessary
for permissions checks.)
* Now matches the rest of the architectures.
Change-Id: I6699e0c8f729923770f136f2c9599185a685336a
Reviewed-on: https://review.haiku-os.org/c/1527
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
* mutex_destroy() only checked wether or not there were waiters,
not if the lock itself was presently held by another thread.
Now we do, which should make #15015 panic much earlier instead
of trying to use freed memory.
* mutex_transfer_lock() and recursive_lock_transfer_lock() did
not check that the calling thread actually owned the lock.
Now it does, which should trigger asserts if anyone tries
to do this.
Copied from PPC with the hooks for Apple hardware removed.
To be completed with the actual PCI bus implementation for Sun machines.
This is where we start doing machine specific stuff, apparently.
Change-Id: I06af4de9621e9d40593d153642478d928083e49a
Reviewed-on: https://review.haiku-os.org/c/1364
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Kernel is 64 bit, and we won't need a 32bit load base.
Change-Id: I729bab01c8f71083002db061e153b0e5052b9a1c
Reviewed-on: https://review.haiku-os.org/c/1326
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Add a platform cleanup hook before starting the kernel. The openfirmware
and PXE loaders clean up their network stack there, while the other
loaders currently do nothing.
This closes ticket #6166
Change-Id: I34765892dfd9b2310c6af97c9ff7d414afae49e5
Reviewed-on: https://review.haiku-os.org/c/50
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Add empty implementation of timer, elf, vm, debugger support, to let the
kernel link.
Also add the kernel linker script.
Change-Id: If0795fa6554aea3df1ee544c25cc4832634ffd78
Reviewed-on: https://review.haiku-os.org/c/1108
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Previous commit adding these was merged very quickly, so here's one
more...
Change-Id: I23c424db7631db1f0ec48e2d0ae47c8409ae6af2
Reviewed-on: https://review.haiku-os.org/c/1088
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Gets the stage0 bootstrap to run.
Imlementation is probably nonsense at this point.
Change-Id: I10876efbb54314b864c0ad951152757cdb2fd366
Reviewed-on: https://review.haiku-os.org/c/1061
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
There was no synchronization of the check of the done flag and the
waiting thread suspending to wait for it. It was therefore possible that
the new team both set the flag and triggered the wakeup of the waiting
thread in that time window, causing it to miss both the set flag and the
thread resumption.
Use a condition variable instead.
Fixes#13081.
Change-Id: I93c45db8dd773fe42b45c4b67153bcd39e200d3b
Reviewed-on: https://review.haiku-os.org/803
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This file is included, directly or indirectly, by most of the
kernel-space C++ code, and so importing the entirety of "std"
seriously pollutes the global namespace.
So instead, just import "std::nothrow", which is the only thing
we really want in the global namespace. Tested on both GCC2
and GCC7 and seems to work just fine.
While I'm here, also update the include guards and copyright
header to match the standard format used elsewhere.
* Consolidate all fdt code into fdt bus_manager
* Build boot and kernel static libraries
Change-Id: I2a69cd7e1f1276999a80734ff12918fd49b599e5
Reviewed-on: https://review.haiku-os.org/440
Reviewed-by: Alexander von Gluck IV <kallisti5@unixzen.com>
memset uses rep stosb on x86 during boot, with memory
not set to write-combining, which makes it slow.
Instead we do aligned writes of 2 x four bytes at once.
Only clear the minimum of size and width * height * 4
UEFI framebuffer size can be huge, upto 512MB here,
and rep stosb seems to be around 25-30MB/s
This is written as generic as possible to work on
old compilers and different platforms, without
expecting boot memset to be optimized.
This makes it almost unnoticable compared to not
clearing.
It seems not all of the kernel includes this, but some use new/delete
anyway. Further, operator delete[] was not implemented at all.
Possibly fixes the ARM build.
Writes to videomem is slow without memory remapping
Can't do the mapping without leaving UEFI, so skipping
the clear. Afaict it should always be cleared by UEFI
This saves ~10 seconds of booting on my machine
(1920*1080*4 bytes)
EFI video mode (should have been it's own commit)
* Only do strcmp if there are enough params
* break when found
This reverts commit c558f9c8fe.
This reverts commit 44f24718b1.
This reverts commit a69cb33030.
This reverts commit 951182620e.
There have been multiple reports that these changes break mounting NTFS partitions
(on all systems, see #14204), and shutting down (on certain systems, see #12405.)
Until they can be fixed, they are being backed out.
* define compat_thread_info, compat_rlim_t, compat_rlimit and
compat_thread_creation_attributes to be used when applicable in compatibility
mode.
* handle 32-bit types in _user_spawn_thread(), _user_get_thread_info(),
_user_get_next_thread_info(), _user_getrlimit(), _user_setrlimit(),
other syscalls are compatible as is.
* init TLS for compatibility mode threads.
Change-Id: I483ba95e6198ddac9d240671bcb56fcd2ad831d2
* in load_image_internal(), elf32_load_user_image checks whether the binary
format requires the compatibility mode.
* we then set up the flag THREAD_FLAGS_COMPAT_MODE and the address space size.
* the compatibility mode runtime_loader is hardcoded with x86/runtime_loader.
* if needed, the 64-bit flat_args structure is converted in-place to its 32-bit
layout.
* a 32-bit flat_args isn't handled yet (a 32-bit team execs a 64-bit binary).
Change-Id: Ia6a066bde8d1774d85de29b48dc500e27ae9668f
* define compat_area_info to be used when applicable in
compatibility mode.
* handle 32-bit types in _user_reserve_address_range(), _user_get_area_info(),
_user_get_next_area_info(), _user_transfer_area(), _user_clone_area(),
_user_create_area(), _user_map_file(), other syscalls are compatible as is.
* _get_next_area_info() doesn't work well with a 32-bit address cookie (address
could be in 64-bit range). Instead use _compat_get_next_area_info() which uses
the area id as cookie, though the areas are not ordered by address any more.
Change-Id: Ic7519ca8824aa2d534b0f03ea75a1bf6ae321535
* handle 32-bit types in _user_send_signal(), _user_sigaction(), _user_sigwait(),
_user_set_signal_stack(), _user_restore_signal_frame(), other syscalls are
compatible as is.
Change-Id: I4c8dc47bfa80f36e363d444d2a5a7be6c621606d
* define compat_image_info, compat_extended_image_info
to be used for respective 32-bit types of syscalls in compatibility mode.
* handle 32-bit types in _user_register_image, _user_get_image_info,
_user_get_next_image_info, other syscalls are compatible as is.
Change-Id: Ibbd33e6796208dfa70d869e36bf745bc3e18d330
* define compat_flock, compat_timespec, compat_stat, compat_attr_info,
compat_fs_info, compat_fd_info to be used for respective 32-bit types
of syscalls in compatibility mode.
* handle 32-bit types in common_fcntl(), _user_read_stat(), _user_stat_attr(),
_user_read_index_stat, _user_read_fs_info, _user_write_fs_info,
_user_get_next_fd_info, other syscalls are compatible as is.
Change-Id: I5b372169fe142f67b81fd6c27e0627d5119ba687
* File locks created by flock should only apply for the file descriptor
that was used to lock the file. Another fd on the same file should then
be denied access (calling flock should fail).
* fcntl based locks, however, are in a separate namespace and are global
to a team.
* This issue was found when running webkitpy test suite, and should close
ticket #13795.
* Don't use session or team as comparison in release_advisory_lock(), as
that information might not be available anymore (e.g. when called from
Team::~Team()). This fixes#14121.
Change-Id: I9efb96cfcefe7e72b0060220c635a665e7e643cc
Co-authored-by: Axel Dörfler <axeld@pinc-software.de>
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
It was limited to a uint32 and could for example be overflown by the
slab MemoryManager that uses size_t on a 64 bit system.
This aligns the signature with create_area() that already uses size_t
for the size argument.
Note that the function is currently private, so the impact should be
limited.
SMAP will generated page faults when the kernel tries to access user pages unless overriden.
If SMAP is enabled, the override instructions are written where needed in memory with
binary "altcodepatches".
Support is enabled by default, might be disabled per safemode setting.
Change-Id: Ife26cd765056aeaf65b2ffa3cadd0dcf4e273a96
The scheduler uses the load tracking logic to compute the load of
threads to be enqueued into the run queue. The time delta between the
last enqueue and the next enqueue may grow very large for threads
that mostly wait on conditions. In such cases the int "n" period count
variable would become too small and wrap around, leading to an
assertion failure.
For this to happen, the thread in question would have to have slept for
at least ~25 days and then wake up. Threads often affected would be ones
waiting for some other process to end, for example shell threads waiting
for a long running process to exit.
Fixes#13558.
The base VMCache class changed to the generic_ types with their
introduction in in *2011* (435c43f591),
but these classes were never properly adapted. These functions should not
be called here (they panic() -- but the base class only returns B_ERROR,
so that is a difference at least.)
Found by Clang's -Woverloaded-virtual.
The UDP service does not own the UDP sockets. When shutting down,
inform the bound sockets that the service is no longer available.
This allows subsequent method calls to error out cleanly.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Add a cleanup function net_stack_cleanup() that calls a new NetStack::ShutDown() method.
Make sure this method works even if the network stack was never initialized.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
This allows the loader to skip BFS partitions that don't contain
a bootable system. Useful when you have a BFS data partition that
comes before the system partition when iterated over.
Currently, only the UEFI loader actually returns more than one
possible partition.
* This allows KPath to not allocate a buffer when initialized
without path.
* Added test cases for this.
* Added test for LockBuffer().
* Enhanced tests to allow building them in debug mode.
* Moved calling vfs_normalize_path() into own private method.
* Improved error codes; B_NO_MEMORY is now only returned if the
allocation actually failed.
* If used with LAZY_ALLOC, Path() and LockBuffer() are now allowed
to return a NULL path.
* Fixes problems with setting the partition name after uninitializing
a partition in DriveSetup. Previously, UninitializeJob() was
followed by SetStringJob(), but the kernel was updating the
change counter for the parent partition when uninitializing a
partition, leading to SetStringJob() having an incorrect change
counter for the parent partition. Now the parent change counter
will be correct when SetStringJob() runs.
Chunks may be physically contiguous, but virtually disjoint. Adding
physical addresses may cause ranges to be merged incorrectly.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
The HashMap constructor was called before the heap is initialized,
ending up calling malloc from the OpenHashMap constructor.
Oddly it was still working on x86 but broke other platforms.
Instead we add a Lookup() static method to Partition,
which by default walks gPartitions for the id,
and recursively calls itself on the children lists.
This means we must add a partition even temporarily to gPartitions
before Scan()ing it though.
Signed-off-by: François Revol <revol@free.fr>
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>