* Also change kMinCellSize from a uint32 to a float so that it can be used
with std::min() and std::max() instead of min_c() and max_c().
* Set the text controls sizes and margins based on the font size. Also rework
_TextRectOffset() so that it will get the right spacing from by dividing the
palette frame by 3.
* Replace bare numbers and refactor with calculation or magic constant.
* Create a private method _TextRectOffset() which calculates and
returns the vertical text rect offset to use based on the font size.
* Replace 2.0 with new kBevelSpacing constant where appropriate.
* fPaletteFrame calculation in _LayoutView() was refactored but should
not have changed.
Fixes#9816
It is no longer necessary, or even desirable for us to set the max
content width of the menu bar of a BMenuField now that BMenuItem
truncation and BMenuField sizing are working.
The user may, however, wish to set the max content width of the menu
bar of a BMenuField themselves like so:
menuField->MenuBar()->SetMaxContentWidth(width);
and the Interface Kit will automatically deduct the left and right
margins from the width including the space used by the drop down arrow.
... cancelling the normal item truncation behavior.
This funcationality comes from BeOS R5, we need to reproduce it for
backwards compat. KeymapSwitcher depends on it at least.
Minimum width is 20px, was set in last commit, comes from BeOS R5.
We use these constants in both MenuField.cpp and BMCPrivate.cpp
Incorporate kMarginWidth into kPopUpIndicatorWidth.
A small code simplication in FrameResized() along with replacing bare numbers
with magic constants.
* the Virtio PCI bus driver exposes a Virtio controller to the Virtio bus manager,
which in turn exposes a Virtio device consumed by Virtio drivers. Drivers follow the
new driver model.
* virtio_block handles Virtio block devices under disk/virtual/virtio_block/x/raw.
* Here is the Qemu command line option for Virtio disk devices:
-drive file=haiku.image,if=virtio
* the PCI bus driver currently supports only legacy interrupts (no MSI(-X) yet).
* There is room for improvements in the bus manager:
- it notifies the host for each queued request, which isn't optimal.
- transfer descriptors should probably be simply preallocated (they are nicely
leaked at the moment).
- indirect descriptors are not supported yet.
and in the block driver:
- get the id of the disk.
- implements flushing the cache.
- improves dma restrictions.
- do_io() should use a page for header descriptors instead of malloc(), which
could cross boundaries.
* The device manager tries to guess the driver based on the PCI device type, this
implies having to declare the "busses/virtio" path for each possible type
provided by Virtio. Thus future driver additions might require patching the device
manager.
* virtio.h is still private, the API is subject to changes.
* virtio_pci.h, virtio_blk.h, virtio_ring.h are copied unchanged from FreeBSD.
* Switch bash, debugger, less, telnet[d] and top apps to use termcap
functionality provided by ncurses lib instead of GNU libtermcap.so;
* NetBSD version of tput utility replaced with ncurses' one. Fixes#9606;
* terminfo database is provided as mandatory package installed during
building target system;
* Remove libtermcap module. The termcap database source and
corresponding build rules are not removed to provide backward compatibility -
until all optional packages will be rebuild on upcoming system version
using terminfo. Note that gcc2 builds may require to provide termcap a bit
longer in the sake of binary compatibility with R5 era apps.
* If at least one image is either B_HAIKU_ABI_GCC_2_ANCIENT or
B_HAIKU_ABI_GCC_2_BEOS almost all areas are marked as executable.
* B_EXECUTE_AREA and B_STACK_AREA are made public. The former is enforced since
the introduction of DEP and apps need it to correctly set area protection.
The latter is currently needed only to recognize stack areas and fix their
protection in compatibility mode, but may also be useful if an app wants
to use sigaltstack from POSIX API.
* Factor out the code to add some data to the about window, with a header and a content under it
* Make this method public so it's possible to add custom entries in an about box
* If the method is called with only the header or only the content, the text is added non-bold and non-indented (like the description entry*).
* Make the header text bold. I'm not sure it looks that good, after all. Thoughts ?
Remove no longer needed header includes, most that I recently added
a few that were already there but just aren't needed anymore. Don't
use BPrivate::MenuPrivate namespace.
Just a few commits ago I moved the label truncation code out of
BMenuItem and into BMCMenuBar because the truncation had to happen
outside of BMenuItem. Turns out, that wasn't true so I'm moving the
label truncation back into BMenuItem and removing the _DrawItems()
method from BMCMenuBar.
Note that the code is not a copy of what was there before, but, the
updated version I created for BMCMenuBar. The main difference is that
I use menuPrivate.Padding() instead of GetItemMargins() and I always
use the width of the parent menu frame instead of using fBounds even
if the state is not MENU_STATE_CLOSED. These are changes needed for
BMCMenuBar but should work just as well for a regular BMenu.
...instead of in BMenuItem and remove the truncation code from BMenuItem.
The label truncation code cannot work in BMenuItem because the super
menu helpfully resizes itself to fit the menu item. So, instead we do the label
truncation in BMCPrivate making sure that BMenuItem there can't expand the
BMCMenuBar because we set the width to fMenuField->_MenuBarWidth()
explicity.
Note that this only truncates the label in BMCMenuField, i.e. the label inside
the menufield, it does nothing to the labels of the menu items in the attached
BMenu or BPopUpMenu which is exactly what we want.
Was passing !fixedSize into the view flags of BMenuBar, which made no sense.
Stop doing that, set fixedSize to true instead.
Remove the fixedSize parameter from this contructor, it's too late for that.
In some cases, BStringColumn wouldn't properly detect that an update was
needed, and would consequently fail to truncate a string as needed with
a column resize.
* Set its type to B_MODAL_WINDO, and also set B_NOT_MOVABLE
* Since this removes the window tab, add an "Ok" button to close the window
* Remove the GetWindow mess and just use it as any regular window
* Adjust all callers again
The AlertPosition method doesn't seem to work right, the window pops up
offset to the right. I also noticed that some of our calls to BAboutWindow
are actually not reacable because we removed Abutrequested from the apps.
Maybe we should clean them up (locale preflet and activity monitor are examples)
More annoying is the fact that opening a modal window from a deskbar replicant
is modal against the whole deskbar. Not sure what to do about that.
- debug_create_symbol_lookup_context() now takes an image ID
parameter that can optionally be used to restrict the symbols
it gathers to only those of the targeted image rather than the
entire team, allowing for significantly more lightweight usage
when the desired image is known. The previous behavior can still
be obtained if desired by passing -1 as said ID.
- Adjust callers.
... back to their previous void returning roles. AlertPosition() is used instead to
check that an alert fits within the sides of the screen and all that.
Also add another CenterOnScreen() method that takes a Screen ID
so you can center a window on another monitor that the one it is currently on
(theoretically someday anyway).
...to position alert's and open/save dialogs nicely inside of the parent window,
or if that is unavailable, the screen frame.
AlertPosition() is private (for now) but BAlert and BFilePanel are BWindow's friends so
BWindow allows those classes to touch it's privates.
BAboutWindow returned false in QuitRequested in order to hide instead of closing.
Not only this keeps a BLooper running for a rarely used window, but it also
prevents quitting an application in the window was not destroyed first.
* Remove aforementioned QuitRequested method,
* Add a static GetWindow method that returns the existing about window, if there
is one, or creates one if there is not. A boolean can be set to tell the caller
what happened,
* Adjust all callers to use that new method, instead of managing the window themselves.
* These methods now return the new point after centering.
* But more importantly CenterIn() does some new adjustments to keep the window
position inside the screen edge. If you pass the screen frame into CenterIn()
it skips these adjustments.
