Now that HAIKU_TOP is a relative path, nearly all paths Jam actually
has to deal with will never contain spaces, so this is now feasible.
Only one issue remains after this commit (namely, setting
HOST_BUILD_COMPATIBILITY_LIB_DIR.)
As Jam prints the entire erring command on failure, including this if-test
in the command itself makes the output somewhat difficult to decipher.
So instead we use two separate rules based on whether or not NO_DOWNLOADS
is set or not.
We don't include the wpa_supplicant on the minimum image, so
these aren't very useful (it seems one needs the wpa_supplicant
to connect even to an unsecured network, with our setup.)
Anyone who needs one of these and also has a reason to use the
minimum image can easily add them back via their UserBuildConfig.
It seems that not all Linux distributions ship an EFI-enabled
cdrtools (i.e. mkisofs takes -e option), Arch being one that
does not.
So instead, we now use xorriso universally, which is
as (or more, in most cases) widely available, and supports
emulating mkisofs with the EFI commands universally.
This also has the added benefit that we can drop genisoimage
support altogether.
FreeBSD 12's net80211 layer contains only 2 small KPI breaks from FreeBSD 11,
so we can upgrade it, apply those 2 changes to the drivers which are affected
(as the changes are in some lesser-used functions), and then upgrade all drivers
one at a time.
FreeBSD 12 has no major changes to the ifnet KPIs that constitute a
source compatibility break, save a single one related to locking
which doesn't really apply to us, and so we don't need to create
a "freebsd12_network" directory to work through the upgrades.
This replaces the old Haiku-native driver that was removed in the last commit.
It should support all the same chips that one did, in addition to the SiS 7014,
and the DP83815 also.
I don't have this hardware, so for anyone who does, please test.
Fixes#1657.
- USB pen drive seems to still work. More extensive testing welcome.
- USB floppies don't work yet, but they don't work anymore with the
current driver, either. I'm still investigating that part.
Fixes#9276
Change-Id: I8aa5ab828ad2ad867d0c187062d6e179372fc2ad
Reviewed-on: https://review.haiku-os.org/747
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
In some LTO-related experiments, it came out empty due to GCC
not generating actual assembly but rather intermediate code,
resulting in various later targets failing with quite literally
thousands of errors.
I added this here so that one could set -Wextra in BuildConfig and
not be bombarded with useless warnings; but it seems that GCC2 chokes
on it instead of ignoring it. Oh well.
This doesn't fully work yet (the FS code in libroot_build
needs to be adapted, as some of the symlink-related calls
are not available on MinGW), but it gets much further than
the "Cygwin" target did.
These have been broken for a long time. Some Cygwin changes that
are relevant on MinGW are kept here, but users on Windows who
want to build Haiku should probably use WSL at this point.
However, now that we are using relative paths and don't need
to worry about drive path kludges, it's actually possible to
get some host tools built on MinGW. Changes for that coming.
We need to force -m32 here, and we also need to tell Clang that we
want to allow relocations in .text.
Clang builds now get to kernel entry, but the bootloader fails to
load the early-boot modules with strange remapping errors, and so
panics with "get boot partitions failed!"
The generic CCFLAGS are already appended to the HAIKU_KERNEL_*FLAGS
and HAIKU_BOOT_*FLAGS, so these were just duplicates. And now that
we strip certain flags out of the base ones, this was incorrect
(and causes Clang to error in some circumstances.)
* Move -fPIC to ccBaseFlags, as we don't want it in ASFLAGS.
* Remove -fPIC from BOOT_CCFLAGS, as we never want it in there.
* Move EFI flags to the actual EFI setup location.
Clang doesn't support -maccumulate-outgoing-args, -nostartfiles
is not needed in LDFLAGS (and lld doesn't know about it anyway),
and Clang uses .dynstr so we need to copy it also.
The paths to tools are relative to cwd, and HAIKU_ABSOLUTE_OUTPUT_DIR is
not necessarily the same as that, in the case where jam is invoked from
the repository root instead of a "generated" directory.
HOST_OBJECT_BASE_DIR is relative to pwd also, so just make it absolute.
Change-Id: I2aef83804be31c3c03c8577d56372f2dc6cb77f8
Reviewed-on: https://review.haiku-os.org/718
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* First re-fix of what was reverted in 85f8e7001
* haikuporter calls these during bootstrap and needs absolute paths
Change-Id: I40f1b15ffd474d3286356f3151eacd9a4a09add2
These data files are used in the generation of build targets,
so moving them to src/data alongside the package_infos & etc.
makes more sense.
They don't seem to be activated properly though (I added some tracing
to try and figure out why they aren't used but haven't gotten to the
bottom of that yet.)
This reverts commit 030d0eb58f.
It is absolutely not correct to assume PWD is the generated dir;
it may also be the repository root.
Fixes jam putting some build artifacts in the source tree.
* I mean, qemu 3.0 supports it.
* Nobody get excited, we need all the triplets added to
our gcc buildtools. clang 7.0 seems to be cool with riscv though.
Change-Id: I17728163e4f28a3c16cee482a253364724b06f3a
* The PWD's are live based on jam run location which means
they shouldn't bind the generated directory to a fixed path
as before.
* We also need an absolute LD_LIBRARY PATH since haikuporter
loses the context invoking host tools.
* I don't think we can run jam from outside of the generated
directory anymore... but I don't think that was a thing.
Change-Id: I020f902ce5235bf268c9075d6e2ae85296a4ad20
* haikuporter's cwd is the haikuporter path during execution
(haikuporter/HaikuPorter)
* We have to pass the full working path and can't use a relative
path here
* Seems to fix the bootstrap build
Change-Id: Ibb139f164c5e08eda3a08136c4e9ea2c9eaeae9e
Strictly POSIX-compliant shells (like dash) do not allow sourcing
files in the present directory without "./". The script really should
not know or care about what directory the passed files are in,
so now we add a jam grist to make the passed paths absolute.
Fixes the build on all systems where /bin/sh is dash or a similarly
POSIX-compliant-no-extensions shell (i.e. virtually all Linux.)
Curerntly contains support for amiga RDB and Apple (PPC) partitionning systems,
that is, things that might be useful, but not for most users, and was
not part of the default package.
Naming inspired from the Extras disk shipped with Amiga Workbench, for
lack of a better idea.
Change-Id: I57fb229806139939bc019e6c43b0aec7ea1f483a
Reviewed-on: https://review.haiku-os.org/652
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* We're making the assumption about EFI here, but it's
fine since those defines will just go unused on non-efi builds.
* Jam segfaults when we get two for's, a case, and an if deep.
(adding an x86_64 check to efi section just below)
Change-Id: Id98e87b6570ddc7d9c2195cd05b0526e71771675
* Move MMU image to a real image define vs being crammed into
the u-boot bootloader Jamfile
* ARM not working yet, but better!
* x86 still builds
Change-Id: I3fb873dbac06fe2db893915b667bf3ce1df44686
Previously only the "effective revision", i.e. the hrev by itself,
was used. Now we include the "commits ahead" count and the "dirty" flag,
if they're there, using _ instead of - of course.
Change-Id: I5238d01926c2cca242bffbdef30bff606a173a06
Reviewed-on: https://review.haiku-os.org/596
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
(cherry picked from commit e7c5d994267fb7d49e3dd50c2854e9b37c9ffca1)
Reviewed-on: https://review.haiku-os.org/597
We don't want to ship these images as the ones for main distribution,
but at least we can make them available as downloads for those who do want
to use CDs.
* This gives us plenty of space for source packages.
* A Mini-DVD is 1.4 GiB, and USB sticks of 2 GiB are at
the sweet spot of low-price vs size.
* Unused space will be compressed in release zip.
* We blew by 700 MiB long ago. Sorry CD-R folks.
Change-Id: I3bbe4508777027f6fe7c0ee2992637541feeb88f
* PRE_BETA_2 is now the default in master.
* For libbe: R1/alpha4 used internal=8, but nobody bumped master
at the same time, so now we are on internal=9.
The latter is not just a symlink to the former, but is a small pseudo-
library that tells the linker to use the .so.1 version instead. As we
do not pass -L to this directory to the linker invocation, the linker
thus cannot find it, and so errors out.
We rightly do not want the linker doing "magic" things for us that
we don't expect, and so even if this one case is fine, we shouldn't
allow the linker to take care of this automatically for us when
it comes to libroot and other core system functionality, especially
as going forward we may indeed add a second libgcc version due to ABI
breaks. Instead, link against .so.1 directly.
Fixes the build breakage caused by the GCC 7 bump.
We now build libicns against it. It seems that it is better-maintained than
JasPer, so we should probably consider switching the JPEG2000Translator to
use it also.
ffmpeg_devel pulls in some other devel packages we don't really need,
and very few things are built against it anyway, so whoever needs it
can install it manually. Same goes for freetype and fontconfig.
* Store pointers in an addr_t instead of int32, for 64-bit's sake
* Use DebugSupport.h instead of userlandfs Debug.h and remove extra parentheses
* Create a header-only String class based on the userlandfs String and use it
* RecursiveLock instead of Locker.
* Jamfile cleanups and other misc. changes.
It isn't yet adapted to the new VFS API, so the build is still somewhat
broken.
This contains the contents of Haiku's sources, which is necessary
to include in "with source" builds for proper (L)GPL compliance,
mostly because we have GPL code in the tree.
"cpp" is the system C preprocessor, not the one from our cross-compiler,
and in the case of my system which does not have GCC installed at all,
it doesn't even exist.
With this, Clang-ARM builds successfully create a "haiku-arm.mmc".
I couldn't get it to output, even after blessing it with "rune",
but that may just be my fault...
Now that HOST_CC is actually passed in, we need to default
everything to it; otherwise, it's up to the Jambase as to
what CC we are actually using.
Found by trying to build Haiku on a system that has no "cc"
executable, but Jam tried to use it anyway (as all three of CC,
C++, and LINK.)
The former is passed to the compiler when linking using it,
the latter is passed to ld when it is invoked directly.
Also modify ArchitectureRules to not overwrite this setting.
This rule process the entire target's source files at once, and so
whoever wrote this rule in the first place (PulkoMandy?) probably
assumed without even testing that "cc -E" would create multiple
outputs for multiple inputs.
It doesn't, though: it just outputs them in sequence on the command line
the same way it does when the files are piped in through "cat". This
also has other advantages (e.g. preprocess errors caused by the compiler
assuming it was C not C++ code and so not defining __cplusplus, local
includes are now resolved properly, etc.)
Doing it this way does exposes other problems like the one fixed in the
previous commit (headers with no context defined, which worked previously
only because they used the context of the preceding `cat`'ed file.)
We now also remove the .pre file after collecting the catkeys.
Otherwise, Clang warns that we haven't set an architecture on ARM,
which is set in CCFLAGS. Since these might also contain other flags
that affect the preprocessor, there isn't any good reason to not
pass it through, so do that.
It seems that at on some platforms at least, Clang uses @define instead
of #define, but with functionally identical syntax, so use sed to
process it as such.
We lost these tunings when I moved us away from board focused
builds. I feel like most of our ARM interest is around ARMv7+
Change-Id: Ie301d275a74d48ee3d0c4c7dc7d6cdd635288a7b
This requires a trunk build of Clang (the flag was only implemented
& introduced 12 days ago), but at present, full builds will fail
due to an unrelated Clang bug: https://bugs.llvm.org/show_bug.cgi?id=38356
* __NO_INLINE__ fixes the cross-build on some glibc-based systems with
newer compilers, as it prevents glibc from declaring functions inline
that we override in libroot_build.
* We can now enable tree-vrp as long as no-delete-null-pointer-checks
goes where it used to.
The lowest model number supported by this driver is "3160", but that's just
Intel's insanity: the 7260 was released the quarter before it. So following
our naming convention strictly, "7260" is the correct name for this driver.
The firmware situation for this one is also a little different. Unlike past
instances where Intel has released mostly nonsubstantial firmware updates,
allowing us to just copy a recent-ish version from the iwlwifi archives,
the firmware is more closely tied to the driver in this series. As a result,
some of this firmware is not even used by Linux yet (they're a few versions
behind it seems), so the firmware packages included here come from FreeBSD.
One major hardware feature - RX of multiple frames at a time - is disabled
in this commit, as it depends on mbuf reference-counting, according to the
FreeBSD developers I asked, which we do not implement yet. I'll hopefully
get to looking at that in the next few weeks.
And with that, I finally have WiFi on my primary laptop, my original reason
for setting out on this quest last year. This commit was pushed through it,
even :)
This was accomplished by adding some pretty nasty hacks to the FFmpeg recipe
so that we can compile it for the GCC2 ABI using GCC7. This works because
GCC's C ABI has not changed between GCC2 and GCC7.
As a consequence of this, pretty much all the longstanding issues of the
ancient-and-still-miscompiled FFmpeg 0.10 are now completely gone.
Fixes#5080, #8461, #12696, #12436, #13981#13410, #13337.
Closes (possibly fixed earlier) #8605, #8511, #6984.
Probably fixes (couldn't test) #13989, #11974.
* Remove WifiFirmwareScriptData; the new mechanism is to use the script
to create a true package, and it also supports the offline downloading
this would have provided.
* Remove "FFMpeg"; never used -- the "ffmpeg" package is actually added
via BuildFeatures.
* Remove Bluetooth; now provided as part of the main Haiku package.
Also add AddHaikuImageSourcePackages invocations for all relevant
(i.e. [L]GPL'ed) packages.
Doesn't truly fix#9990 as PackageKit cannot be used to install source
packages, but this is enough for creating a redistributable image,
so that ticket can be moved out of the beta1 milestone now.
No functional change. Ideally we would create these via ResAttr like we do
the mail-providers, but these have attributes on their directories and not
just the files, so that will be slightly trickier, so for now just keep them
in their zip format.
* The if-case was appending to gccBaseFlags after the rest of the file
was done using it, so it was ineffective. Now we set it with the rest
of the baseFlags.
* We already pass no-integrated-as in configure, no need to do it in
MainBuildRules.
* B_USE_BUILTIN_ATOMIC_FUNCTIONS isn't used anymore, so get rid of it.
Most of the problems with tree-vrp stemmed from its deletion of null-pointer
checks (see linked commit in the source.) Now, GCC has a flag to control that,
and with it enabled I can boot to the desktop even with tree-vrp enabled.
On GCC 7.3, it conflicts with our definition of 'fork'. The documentation
states that disabling builtins has no effect on versions where they
do not exist, so we don't need to check for GCC7 here.
* The ram_disk driver was missing in the bootstrap images. Adding
it will allow the ramdisk command to work. And with a modified
haikuports.conf one might even use a ramdisk TREE_PATH.
* The virtio_net driver will probably be handy in some situations.
git_svn needs alien_svn, but we don't include this in the build repos.
Remove it from the preinstalled software, it is available in the depot
if people need it.
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.
This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE
To quote jscipione (from 95e8362c52),
"Let me tell you a story about a bug" -- though this tale spans a much
lesser time than that one did.
In 5e19679ea3, I enabled libroot_build for
Haiku, instead of using the system libroot as we had before. There were
a number of bugs introduced along with this that I hadn't fixed (and there
may be more after this), but most of the obvious ones (crashes on x86_64...)
were fixed shortly enough.
Attribute usage, though, was a different story. Unlike most of the POSIX
calls in libroot, which were aliasing system functions no matter what the
platform, the attribute calls were not, as they are specific to Haiku.
Initially I had completely forgot about them, and it wasn't until a few days
later when I noticed that I had an "attributes" directory in my generated
that I realized that the "generic" attribute layer was being used on Haiku.
I attempted a fix for this in 5e19679ea3,
thinking that would clear the problem up, but I didn't actually run a test
beyond seeing that my BuildConfig had been updated properly. In fact,
BuildSetup was hard-wired to not even pass that definition through on
Haiku, and so that commit had in effect caused nothing.
My initial "fix" of just changing BuildSetup then caused a build failure,
as while libroot_build itself compiled, it ran into errors whenever attributes
were used, because in letting the real libroot's attribute calls shine
through, I had bypassed libroot_build's FD emulation/shim layer.
Then I tried and failed at three separate attempts to solve this with code:
- a version of the "fs_attr_...h" interface for Haiku. This proved possible
in theory, but in practice I would need to reimplement a lot of attribute
handling code in it, because all I had access to from there was syscalls.
- a version of "fs_attr_untyped" that bypassed its reimplementations of
the "fs*attr" functions for the libroot ones, only using the FD shim layer.
This proved possibly not even theoretically possible because it would have
caused preprocessor hell in some of the build headers, and also assumptions
about how attributes are read were totally different.
- a completely new "fs_attr_haiku" that was a completely new interface to
the fs*attr functions. This proved practically impossible because of the
need to include structures from the system libroot to call out to readdir,
etc. that attempts to solve would also have caused preprocessor hell.
Then I realized that the Linux xattr emulation library, which I'd used
as a reference when attempting the first solution, was shipped by default
as a system library in all builds of Haiku ... and so I could just tell
fs_attr_untyped to use the Linux xattr handler, and then link against libgnu.
So that is how I arrived at this strange and decidedly unorthodox solution
to a problem of my own creation.
Per #10267, "Most (ported) third-party software should be removed
from the Haiku source repository."
Since HaikuPorts already has the ncompress package, this file
should no longer exist.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Original patch missed modifying the "minimum" definition and the
src/bin/Jamfile, so I took care of that.
- Recent changes to the build system appear to make the assumption
that the GNU regex APIs are universally available. This isn't the
case on FreeBSD, which requires libgnuregex to provide that
functionality. This broke the host keymap build.
gnuefi package was replaced by gnu_efi_kernel, but build
was not updated. This is guesswork, as I couldn't track down what changed.
It finds headers, headers_arch and lib and works so should be ok.
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
I wrote this back in 2010 as my first driver project.
Reasons to remove it:
* The license is GPL
* Current WiMAX hardware is generally WIFI based.
* It controlled the hardware, but never worked
for network access since we need SSL certs and stuff
which vendors weren't too open with.
* WiMAX kind of died (at least in the US)
I left the wwan directory, it would be a nice spot
for CDMA / GSM dongle drivers.
Previously we just used the system libroot, which of course meant
that when libroot's ABI changed, the build broke. Now we use the full
libroot_build that we do on non-Haiku platforms. The logic for "BeOS-compatible
but not Haiku" does not really apply anymore, so it has been gutted where
appropriate (and libhaikucompat has been decoupled from the build.)
The only caveat here is the change to Errors.h -- we really should be using
the system's one where I included the one from the tree, but for whatever
reason, GCC2 refused to handle the #include_next properly.
Fixes the build breakage of Haiku-on-Haiku by my prior commits (sorry).
Instead build the one in-tree from src/data/package_infos/. Fixes the
"HaikuPorts repos have wrong URL" problem that has occured since the
switch to buildmaster repos.
When compiling with GCC, these headers get pulled in from the
gcc_syslibs_devel package, but we cannot do something similar
for Clang as Clang adds/removes internal builtins used by
the headers nearly every version. So instead we just copy
all the intrinsics headers from current Clang into generated,
and make sure this directory is included before any others.
* Actually locate the clang executable, and allow user overrides
* Properly preserve arguments in get_build_tool_path
* Fix get_build_tool_path for commands with dashes (e.g. "clang-5.0")
* Update repository file to hardlink_packages modified one.
* Add some basic process overview to directory.
* We don't normally document in paths, but this stuff is complex.
* Documentation improvements welcome.
* Hashing semantics for the new build repositories are different than
the old ones, so update those (if the x86 build was not broken before
it is now...)
* OptionalPackages has been updated slightly (removed libtool and git_cvs
from the default images, as they are rarely used nowadays and would pull
in a bunch of dependencies we don't really care for either)
* Removed lib:libqrencode from Haiku package requires (qrencode_kdl is a
static library, the userland libqrencode is not used anywhere in the tree,
as far as I can tell)
* Fix build of JPEG2000 translator after update
* Decouple fluidsynth build machinery and remove from image now that it
is no longer used
* Update repository URL in Repositories preflet
x86 is unaffected, as already mentioned. This breaks the build,
but since this diff was large, I wanted to have the functionality
changes be clear, so they are in the next commit.
The packages that remain are only the ones used somewhere in Jam
(including ones off by default, e.g. Wonderbrush, Live555.)
The x86 repo is untouched as it is being phased out and has no buildmaster-
generated equivalent.
It was trying to use $(feature:U) outside of the loop where it is
actually set. Thanks to PulkoMandy for spotting the problem.
(How did this not break tons of stuff?)
libmedia.so was used by at least 2 apps included in the minimum image,
Activity Monitor and Deskcalc which subsequently failed to load on minimum.
Deskcalc wasn't actually using libmedia.so so I managed to get it to link and
run on minimum, however, Activity Monitor is using libmedia.so so needed it
to be present.
To fix this I added libmedia.so to the minimum image, I hope this does not blow
its size budget. (adds 1.0MB)
Among other fixes and more translations, there's now an "Import"
feature to merge in another catkeys file.
Handy when the en.catkeys changed and you want to import the translated
catkeys file for the previous version, which already contains the
translations for the strings that haven't changed.
Hmm... hope what I wrote there is decipherable...
No longer used by anything (it appears some old kernel drivers that
are not included in the build might use it, but I don't know why
they need it -- we already ship GPL'd code [libntfs] for the kernel
in the default build unconditionally.)
Briefly discussed with js a few weeks back.
* Remove the target-board system.
* From now on, we target generic non-x86 architectures
while leveraging fdt when needed.
* ARM mmc images will likely need some post-processing to make
them bootable on individual hardware. (This is actually how
distros like Fedora handle ARM now. The image 'writer' application
is told what hardware the image is for and adds a vendor bootloader
/ SPL / u-boot / etc)
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
- hub: had an annoying problem preventing to run the script directly.
Now uses a proper "shebang" so it finds ruby.
- mako, setuptools: needed to build Mesa.
- neonlights: my favorite screensaver.
- python 3.6.
- advancemame, for arcade gaming on Haiku.
- sox and gnuplot, for various experiments.
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
* Enables us to add an optional EFI filesystem
to the anyboot image.
* All existing anyboot behaviour is preserved.
* We still need to figure out how to build bios
and EFI loaders at the same time on x86.
* The tiny "fake ISO" still needs el-torito
alt-boot for the EFI loader to work when burned
to a CD. This makes the EFI loader work when
written to a hard disk / flash drive.
* Favorites can now be drag & dropped on apps that accept a program,
like LaunchBox - or in fact the ignore list of the Setup window.
* Favorites cannot be moved any longer in a result list, only in the
favorites list.
* When opening an app's containing folder, scroll to and select the
app.
* Fix crash due to a race condition.
* Closes issues: #14, #13, #12
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
We bundle bitstream charter as a default font to use when nothing else
is available. We also used to bundle a Courier font, but it does not
work properly.
- Fix the license for Bitstream Charter, to include just the license and
no extra text.
- Add said license to AboutSystem
- Remove the Courier font from the package and from the source tree.
Fixes#11696.
* podofo 0.9.5 isn't compatible with 0.9.4.
* grep compatible with version 2.
* mercurial requires python2 instead of python.
* scribus is rebuilt with newer podofo.
Needed a quick new release:
* Fix disappearing favorites.
* Add context menu with quick access to favorites and QuickLaunch's
"About" to Deskbar replicant.
* Updated localization and documentation.
* Tiny tweaks to the QuickLaunch icon.
- Both Noto and Noto Sans CJK JP are now used as font fallbacks,
allowing to cover a rather large range of characters. This also makes
it possible to mix the two fonts easily.
- Remove VL-Gothic from packages and from AboutSystem
- Add Noto fonts to the dependencies of the Haiku package.
This provides a similar look for all languages as discussed on the
mailing list.
* Added a "Free registration" text file. As the user has to
re-register from time to time for some reason, it may be
easier to find the info in a text file in the app's folder
than looking into the decription of SynC Modular in HaikuDepot.
* FuseSMB provides access to shared files and folders over SMB.
It features automatic discovery of servers and shares and
displays them as a folder hierarchy in a virtual volume on the
desktop
* Supports interactive authentication to access shares which require
login. Just open it, and a dialog pops up. Login data is stored in
BKeyStore.
* Comes with a network preferences add-on to easily enable and
configure it. No barbaric manual typing of mount commands required!
* Makes use of Haiku FUSE extensions to give custom MIME types with
icons for workgroup/share/server folders. Thanks again to humdinger
for designing the workgroup and share icons!
* Although the used libsmbclient only supports SMB protocol
version 1, performance is decent enough. Getting around ~75MiB/s
reading over a GbE link here
