Untested so far.
Change-Id: I3453115599cf2112858a194173212401ae4ac1b7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5104
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: David Karoly <karolyd577@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* This will be needed for the following commit that implements
`pthread_tryjoin_np` and `pthread_timedjoin_np`.
Change-Id: Idccb1aa588d6d10825294d14925d9bd046b65f19
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5098
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Set AP[2:0] and XN flags based on page attributes.
PXN is not implemented as it seems to be available only
in L1 descriptors on ARMv7.
Set TEX, B, C flags based on memoryType:
* B_MTR_UC is mapped to Strongly Ordered (TEX=0, B=0, C=0)
* B_MTR_WC is mapped to Shareable Device Memory (TEX=0, B=1, C=0)
* B_MTR_WT is mapped to Outer and Inner Write-Through, no Write-Allocate (TEX=0, B=0, C=1)
* B_MTR_WB is mapped to Outer and Inner Write-Back, no Write-Allocate (TEx=0, B=1, C=1)
* B_MTR_WP has no direct equivalent on the ARM so it's mapped as B_MTR_WB
* default is Write-Back
Implement ARMPagingMethod32Bit::AttributesToPageTableEntryFlags()
for mapping from page attributes to AP[2:0] and XN flags.
Implement ARMPagingMethod32Bit::PageTableEntryFlagsToAttributes()
for the reverse mapping used in Query() and QueryInterrupt()
i.e. recover page attributes from AP[2:0] and XN flags.
Implement ARMPagingMethod32Bit::MemoryTypeToPageTableEntryFlags()
fr mapping from memoryType to TEX, B, C flags.
Implement ARMVMTranslationMap32Bit::Protect() which used to be commented out.
Accessed and modified flags are not implemented yet, so no such
flags are returned from Query() and QueryInterrupt().
Also because of this, we just invalidate TLB on any call to Protect()
without checking whether the page has been accessed.
Change-Id: I027af5c02bd6218d9f92a58044aeb26373e1956b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5236
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Bootloader:
* set permissions to kernel read/write, no user access
for initially mapped memory areas
* set permissions to kernel read/write, no execute,
no user access for UART
Kernel:
* physical memory mapper uses kernel read/write mapping
with no-execute bit enabled
* all other pages are mapped as read/write/execute for
kernel and user
* proper access permissions and memory types to be
implemented later
Enforce memory access permissions by setting DACR to
client mode for domain #0, no access for other domains.
see ARM Architecture Reference Manual, section B3.7 Memory access control
and in particular the following subsections:
B3.7.1 Access permissions
B3.7.2 Execute-never restrictions on instruction fetching
B3.7.3 Domains, Short-descriptor format only
Change-Id: I8127b4c72dc516d013cb9751d80d6f3a9ec835e6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5233
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The old implementation used the real lock_memory(). This is problematic
and does not work for a large number of reasons:
1) Various parts of the kernel assume memory is locked only very
temporarily, and will often wait on locked memory to become unlocked.
The transient nature of locks is further demonstrated by the fact that
lock_memory acquires references to structures, like the address space,
which are only released by unlock_memory
2) The VM has a hard assumption that all lock_memory calls will be
exactly balanced, and maintains internal "WiredRange" structures
on areas, etc. corresponding to the original lock_memory calls.
Maintaining separate data structures as this code did is a recipe
for even more problems when the structures are manipulated separately,
leading to confusing or incorrect behavior on unlocks.
3) Areas with locked memory cannot be deleted, nor can the pages which are
locked be removed from the areas/caches. This of course is most notable
when destroying teams which locked memory, but the problem also occurs
when just using delete_area, resize_area, mmap/munmap, etc.
Because of (2) and especially (3), adding support for mlock()-like semantics
to the existing memory locking system is just not a good option. A further
reason is that our lock_memory is much stricter than mlock(), which only
demands the pages in question must remain resident in RAM and cannot be
swapped out (or, it seems, otherwise written back to disk.)
Thus, this commit completely removes the old implementation (which
was seriously broken and did not actually automatically unlock memory
on team exit or area destruction at all, etc.) and instead adds a new
feature to VMAnonymousCache to block certain pages from being written out.
The syscall then just invokes this to do its work.
Fixes#17674. Related to #13651.
Change-Id: Id2745c51796bcf9a74ba5325fe686a95623cd521
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5147
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Resize(): adds more space to the end of the bitmap.
* Shift(): moves all bits in the map up or down.
* Use size_t instead of int for indexes.
Also add unit tests for the new functions (they seem to be passing.)
Reference material for shift implementation:
2c56d43c1e/bitops.h (L977)
Change-Id: Ia85768aaeed7bd3ffef3a9f575f05331e048fe50
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5146
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
see Devicetree Specification,
section 2.3.5 #address-cells and #size-cells
The #address-cells and #size-cells properties may be used in any
device node that has children in the devicetree hierarchy and
describes how child device nodes should be addressed.
The #address-cells and #size-cells properties are not inherited from
ancestors in the devicetree. They shall be explicitly defined.
If missing, a client program should assume a default value of 2
for #address-cells, and a value of 1 for #size-cells.
Change-Id: Iafed49358540f8ac7aa673c3dc0191c9b580250b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5144
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Part of the point of published variables is to make them "shareable",
and not require external synchronization. Requiring the callers
to ensure unpublishing does not occur is thus unreasonable, as e.g.
a variable could be unpublished immediately after being notified.
That is the case for some usages of these variables in the FreeBSD
compatibility layer, which under heavy usage, can and did trigger
use-after-unpublishes and then KDLs, at least in local testing.
Instead, only unlock the hash after we have locked the variable.
This is already done in some other functions, so it's safe to do
it here, too. This way, the variable won't be unpublished
while Notify() is running.
* move common SMP initialization code to x86/arch_smp.cpp
* factor out arch-specific SMP initialization to
arch_smp_32.cpp resp arch_smp_64.cpp
* implement smp_trampoline for x86 32-bit EFI loader
* rename SMP trampoline for x86_64 to long_smp_trampoline
* add new argument virtKernelArgs to arch_smp_boot_other_cpus
as the kernel args are not identity mapped on 32-bit architectures
Change-Id: I30d0bb1fa9bfb08f6784a2af34eb83d6b64afa57
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4869
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Instead of the malloc_referenced system. Makes for some cleaner code,
and the malloc_referenced system was only used here, so it can now be
dropped altogether.
* Adjust a comment that now goes with 3 functions and not just 1.
* Remove spinlock switch function, this is useless as it cannot
change interrupt states here, but we require interrupts to
be enabled to wait on a ConditionVariable.
* Remove WaitStatus function from ConditionVariableEntry; unused
and would require locks anyway.
* Implement Publish using Init.
vendor_id shall come after the bitfields
Move hpet_address to separate struct definition so we can apply
the correct packed flags.
see also: https://wiki.osdev.org/HPET
Change-Id: Iced005846fedd4b895910e9b61137d5349db5b41
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4859
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Change-Id: Iff9e4198aca706097889faf51e9559fe551126ad
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4782
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Working under qemu smp 1,2+
* Working on SiFive Unmatched
* x86_64 efi not broken by smp_boot_other_cpus change
Change-Id: I32ebc17913e46ed082be9ade8f56448bbf12f16e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4705
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
For now this is used on RISCV64 to indicate that interrupts will always
be on CPU 0. However, in the future, some architectures may want
or require interrupts to be "steered" in various ways, and this
also paves the way for that.
Change-Id: Iec79870cf5c4898d102d0e624de19602271ae772
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4721
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Before 2019, the entire ConditionVariable system was "giant"-locked:
that is, there was a single global lock that all ConditionVariable
and ConditionVariableEntry operations had to pass through. This of
course was not very performant on multicore systems and when
ConditionVariables see significant use, so I reworked it then to have
more granular locking.
Those patches took a number of attempts to get right, as having two
objects in separate threads that can each access the other not turn
into a deadlock or use-after-free is not easy to say the least,
and the ultimate solution I came up with erased most of the performance
gains I initially saw on the first (partially broken) patchsets.
So I have wanted to revisit this and see if there was a better way
even since then. Recently there have been a few reports of
ConditionVariable-related panics (apparently double unlocks),
notably #16894, and so that was reason enough to actually revisit
this code and see if a better solution could be found.
Well, I think I have come up with one: after this commit, Entries
no longer have their own lock, and instead accesses to Entry members
are almost always atomic; and there is now a case where we spin inside
Variable::_NotifyLocked as well as one in Entry::_RemoveFromVariable.
This leads to somewhat simpler code (no more lock/unlock dance in Notify),
though it is significantly more difficult to understand the nuances of it,
so I have left a sizable number of comments explaining the intricacies
of the new logic.
Note: I initially tried 1000 for "tries", but on a few instances I did see
the panic hit, strangely. I don't think the code that is waited on can
be reasonably reduced any further, so I have just increased the limit to
10000 (which is still well below what spinlocks use.) Hopefully this suffices.
Quick benchmark, x86, compiling HaikuDepot and the mime_db in VMware, 2 cores:
before:
real 0m23.627s
user 0m25.152s
sys 0m7.319s
after:
real 0m23.962s
user 0m25.229s
sys 0m7.330s
Though I occasionally I saw sys times as low as 7.171s, so this seems
to be at least not a regression if not a definitive improvement.
Change-Id: Id042947976885cd5c1433cc4290bdf41b01ed10e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4727
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The lock entry is the first thing in the struct, so this is a no-op
change, but it is safer to do in case of changes, of course.
Spinlocks have been structures for quite a long time, so this was
probably just missed in the conversion.
we don't sample if the last sample is too recent and use the cached result.
Change-Id: I17ed29bda7fe7276f1a4148b3e1985c9d32ae032
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4101
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* A few things need alignment, instead of forcing them all
to align themselves, support alignment of the kernel_args
* Default of 1 is "no alignment"
Change-Id: Iff05dcec8adaa963c8444d701464ea11616062f6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4698
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This way it becomes much easier to write multiple console implementations
in one bootloader.
Tested for bios_ia32 and efi.
Change-Id: I67134f5c3de109b15d46898864ba7f51c6592afc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4642
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This reverts commit 3e8376c6dd.
Reason for revert: Bootloader currently fails to load kernel
It should be added back once the kernel can start.
Change-Id: Iebefbf8681aff4dff09cef7b7eb832b61f7789c7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4579
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Someone on the internet found out gcc only understand posix_memalign.
The alloc_align attribute may be applied to a function that returns
a pointer and takes at least one argument of an integer or enumerated
type. It indicates that the returned pointer is aligned on a boundary
given by the function argument at position.
Change-Id: I4b0af6ef3020da1fb460652117286193d5d72f1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4514
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Change-Id: Ifadd47204be1ec688017a567d43dca38c80bd1df
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4431
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Only one code change: for some reason, GCC chokes on the cr3 functions
as macros (throwing errors about invalid registers.) The BSDs have them
as inline functions instead, so they are converted to that here.
Tested and working. There seems to be about a 10% decrease in CPU time
on some compilation benchmarks that I briefly tried.
Change-Id: I31666297394d7619f83fca6ff5f933ddd6f07420
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4515
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
