* arm efi additions
* cleanup some cpu headers which were oddly
split between efi and bios_ia32
* Move calculate_cpu_conversion_factor over to
arch_timer since it is timerish, and x86 only
* Drop some duplicated code from efi start. Move
hpet init code into efi timer/hpet code
Change-Id: Ia4264a5690ba8c09417b06788febc4f572f111ce
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2259
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Now matches the rest of the architectures.
Change-Id: I6699e0c8f729923770f136f2c9599185a685336a
Reviewed-on: https://review.haiku-os.org/c/1527
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
* Called via arm_mailbox_bcm2835 *and* arm_framebuffer_bcm2835
* This is a bit messy. We really should be getting these
chipset-centric bases from the provided FDT / DTB.
* I can't think of a way to redo this without undoing
work towards FDT.
* The Raspberry pi 2 uses a new SoC which differs slightly
from the Raspberry Pi 1.
* Someday these two board targets could go away when we get
FDT support.
* To while there was some compatibility between
BCM2708 and BCM2805, it makes the BCM2806 changes
more confusing. We don't have any valueable BCM2708
targets.
* Removes default mapping of a portion of the RAM (will be done
as needed)
* Passes on the page directory area to kernel, so on early vm init
the kernel can use the area for pagetable allocation.
* Leaves it to the platform to pass in physical memory range(s). This
will ultimately come from FDT.
* Fix long standing issue with allocation of the heap, potentially
causing other part of the bootloader to overwrite the heap.
* Implements pagetable allocator in kernel for early vm mapping.
This fixes the first PANIC seen, we now just get the same one later
on when the VM is up... more to come...
This reverts commit 3fbb24680c.
As I mentioned in #11131, this fix is not correct, and works around
the problem. The real reason was that arch_debug_call_with_fault_handler
was not working properly, so the fault handler went crazy.
With commit eb92810 that is fixed so this can be reverted.
When an ARMv7 CPU is detected, immediately turn on the FPU. This allows
us to use vsnprintf in the TRACE call in that function, as our libc is
compiled with floating point support and will trigger a fault if the FPU
is not available.
This lets the boot go further, and crash in mmu_init. Next steps:
* Find why mmu_init is crashing
* Setup some fault handlers, otherwise we call uboot ones, and they are
not very helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabled...
* Add isb just because.
* pdziepak pointed out that ARMv5 and before
had different barrier support.
* pdziepak also mentioned that dsb was too strong
for __sync_synchronize
* On ARMv6 or older, we do a simulated dsb.
* Move __sync_synchronize into thread.c in libroot
and use the new arch_atomic.h dsb/dmb defines.
* Gets arm @bootstrap-raw to end of bootstrap.
* Don't assume verdex as it isn't clear this was
occurring.
* Make an educated guess on HAIKU_BOOT_PLATFORM
based on provided board (but still allow it to
be overridden)
* Error out if user doesn't populate
HAIKU_BOOT_PLATFORM or enters an unknown board
name.
* You need to add "-sHAIKU_BOOT_BOARD=xxx" to
your jam to build for the proper ARM device.
* Rename beagle to beagleboneblk as per the
documentation.
* Use atomic_get_and_set for return value
* Atomics are no longer volatile
* Add missing arch_cpu_pause stub
* Move arch_cpu_idle to arch_cpu header to match
other architectures
This adds the -mapcs-frame compiler flag for ARM to have "stable"
stack frames, adds support to the kernel for dumping stack crawls,
and initial support for iframes. There' much more functionality
to unlock in KDL, but this makes debugging already a lot more
comfortable.....
Placing commpage and team user data somewhere at the top of the user accessible
virtual address space prevents these areas from conflicting with elf images
that require to be mapped at exact address (in most cases: runtime_loader).
This detects everything up to ARMv6 right now. Need to check more
recent ARM ARMs for ARMv7 detection.
The detected details get passed on to the kernel, which can use
the pre-detected info for selecting right pagetable format and such.
Copyright removal of Axel done after agreement with Axel @ BeGeistert
that for files that were copy/pasted from x86 arch and then fully
replaced the implementation, removal of original copyright holder is
allowed, since their actual code is gone ;)
This is to make sure all ARM platforms will benefit from planned work on this
MMU/CPU code. The less code duplicated, the better.
Compile-tested for all supported ARM platforms
This also implements the fault handler correctly now, and cleans up the
exception handling. Seems a lot more stable now, no unexpected panics or
faults happening anymore.
* Changed IS_USER_ADDRESS to check an address using USER_BASE and
USER_SIZE, rather than just !IS_KERNEL_ADDRESS. The old check would
allow user buffers to point into the physical memory map area.
* Added an unmapped hole at the end of the bottom half of the address
space which catches buffers that cross into the uncanonical address
region. This also removes the need to check for uncanonical return
addresses in the syscall handler, it is no longer possible for the
return address to be uncanonical under normal circumstances. All
cases in which the return address might be changed by the kernel
are still handled via the IRET path.
* gPeripheralBase keeps track of the device
peripherals before and after mmu_init
* Add ability to disable mmu for troubleshooting
* Remove static FB_BASE, we actually don't know
where the FB is yet. (depends on firmware used)
