sure that the kernel's frame buffer console points to the right data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34835 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the rw_lock_{read,write}_unlock() return values to void. They
returned a value != B_OK only in case of user error and no-one checked them
anyway.
* Optimized rw_lock_read_[un]lock(). They are inline now and as long as
there's no contending write locker, they will only perform an atomic_add().
* Changed the semantics of nested locking after acquiring a write lock: Read
and write locks are counted separately, so read locks no longer implicitly
become write locks. This does e.g. make degrading a write lock to a read
lock by way of read_lock + write_unlock (as used in the VM) actually work.
These changes speed up the -j8 Haiku image build on my machine by a few
percent, but more interestingly they reduce the total kernel time by 25 %.
Apparently we get more contention on other locks, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34830 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added VMCache::MovePage() and MoveAllPages() to move pages between caches.
* VMAnonymousCache:
- _MergeSwapPages(): Avoid doing anything, if neither cache has swapped out
pages.
- _MergeSwapPages() does now also remove source cache pages that are
shadowed by consumer swap pages. This allows us to call _MergeSwapPages()
before _MergePagesSmallerSource(), save the swap page shadowing check
there and get rid of the vm_page::merge_swap flag. This is an
optimization based on the assumption that usually none or only few pages
are swapped out, so we save a lot of checks.
- Implemented _MergePagesSmallerConsumer() as an alternative to
_MergePagesSmallerSource(). The former is used when the source cache has
more pages than the consumer cache. It iterates over the consumer cache's
pages, moves them to the source and finally moves all pages back to the
consumer. The final move is relatively cheap (though unfortunately we
still have to update all pages' vm_page::cache field), so that overall we
save iterations of the main loop with the more expensive checks.
The optimizations particularly improve the common fork()+exec*() situations.
fork() uses CoW, which is implemented by putting two new empty caches between
the to be copied area and its cache. exec*() destroys one copy of the area,
its cache and thus causes merging of the other new cache with the old cache.
Since this usually happens in a very short time, the old cache does still
contain many pages and the new cache only few. Previously the many pages were
all checked and moved individually. Now we do that for the few pages instead.
A very extreme example of this situation is the Haiku image build. jam has a
huge heap (> 200 MB) and it fork()s+exec*()s for every action to be executed.
Since during the cache merging the cache is locked, any write access to a
heap page causes jam to block until the cache merging is done. Formerly that
took so long that it killed a lot of parallelism in multi-job builds. That
could be observed particularly well when lots of small actions where executed
(like the Link, XRes, Mimeset, SetType, SetVersion combos when building
executables/libraries/add-ons). Those look dramatically better now.
The overall speed improvement for a -j8 image build on my machine is only
about 15%, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34784 a95241bf-73f2-0310-859d-f6bbb57e9c96
another. The code originates from vm_copy_on_write_area(). We now generate
the VM cache tracing entries, though.
* count_writable_areas() -> VMCache::CountWritableAreas()
* Added debugger command "cache_stack" which is enabled when VM cache tracing
is enabled. It prints the source caches of a given cache or area at the
time of a specified tracing entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34751 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Replaced the "userOnly" parameter by a "flags" parameter, that allows to
specify kernel and userland stack traces individually.
- x86, m68k: Don't always skip the first frame as that prevents the caller
from being able to record its own address.
* capture_tracing_stack_trace(): Replaced the "userOnly" parameter by
"kernelOnly", since one is probably always interested in the kernel stack
trace, but might not want the userland stack trace.
* Added stack trace support for VM cache kernel tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34742 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added Lock()/Unlock() for explicit locking by a service user.
* Added NotifyLocked() and made Notify() inline.
* Added HasListeners() so one can check whether there is a listener at all
before preparing the event message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34736 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleaned up private method names as much as possible (it's probably not a good
idea to rename BStatable::set_stat() for compatibility reasons).
* Cleaned up sources.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34690 a95241bf-73f2-0310-859d-f6bbb57e9c96
- enqueue_in_run_queue() no longer returns whether rescheduling is supposed
to happen. Instead is sets cpu_ent::invoke_scheduler on the current CPU.
- reschedule() does now handle cpu_ent::invoke_scheduler_if_idle(). No need
to let all callers do that.
* thread_unblock[_locked]() no longer return whether rescheduling is supposed
to happen.
* Got rid of the B_INVOKE_SCHEDULER handling. The interrupt hooks really
can't know, when it makes sense to reschedule or not.
* Introduced scheduler_reschedule_if_necessary[_locked]() functions for
checking+invoking the scheduler.
* Some semaphore functions (e.g. delete_sem()) invoke the scheduler now, if
they wake up anything with greater priority.
I've also tried to add scheduler invocations in the condition variable and
mutex/rw_lock code, but that actually has a negative impact on performance,
probably because it causes too much ping-ponging between threads when
multiple locking primitives are involved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34657 a95241bf-73f2-0310-859d-f6bbb57e9c96
* simple_smp scheduler: Rewrote the interesting part of
enqueue_in_run_queue(). It always selects a target CPU for the inserted
thread, now. If no CPU is idle, the CPU running the thread with the lowest
priority is chosen. If the thread running on the target CPU has a lower
priority than the inserted one, it will be asked to reschedule. If that's
the current CPU, we'll return the correct value (wasn't done before at
all).
These changes help reducing latencies. On my machine in an idle system
playing music DebugAnalyzer shows maximum latencies of about 1 us. I still
find that a bit much, but it's several orders of magnitude better than
before. The -j8 Haiku image build time dropped about 10%.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34635 a95241bf-73f2-0310-859d-f6bbb57e9c96
implemented by means of an additional member in cpu_ent.
* Removed thread::keep_scheduled and the related functions. The feature
wasn't used yet and wouldn't have worked as implemented anyway.
* Resurrected an older, SMP aware version of our simple scheduler and made it
the default instead of the affine scheduler. The latter is in no state to
be used yet. It causes enormous latencies (I've seen up to 0.1s) even when
six or seven CPUs were idle at the same time, totally killing parallelism.
That's also the reason why a -j8 build was slower than a -j2. This is no
longer the case. On my machine the -j2 build takes about 10% less time now
and the -j8 build saves another 20%. The latter is not particularly
impressive (compared with Linux), but that seems to be due to lock
contention.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34615 a95241bf-73f2-0310-859d-f6bbb57e9c96
header. This shall ensure uniqueness of the ioctls.
* Added a special SIOCEND define to Haiku's sockio.h, so that drivers can define
private ioctls as can be seen in src/add-ons/kernel/drivers/network/wlan/atheros/dev/ath/if_athioctl.h.
* Modified ioccom.h of the FreeBSD compat layer, to make use of the special
SIOCEND define.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34612 a95241bf-73f2-0310-859d-f6bbb57e9c96
accessible from the outside.
* Instead, request_data now retrieves/releases a reply port on its own.
* There were some more places that still used write_port()/read_port() instead
of QueryServer().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34597 a95241bf-73f2-0310-859d-f6bbb57e9c96
usual structures.
* Also, they now use the QueryServer()/SendToServer() functions instead of
duplicating them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34596 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed at least two reference counting problems, but nodes from killed teams
still remain alive (will look into this at a later point).
* GetLiveNodes() is now using transfer_area() as well.
* Made all sizes in the SendTo*() and Query*() functions size_t.
* Replaced reinterpret_casts with static_casts when casting void pointers.
* Ordered the request/reply structures by target.
* Tried to consolidate the use of add_on vs. addon.
* More cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34591 a95241bf-73f2-0310-859d-f6bbb57e9c96
look into this now.
* Renamed the MMediaFilesManager to MediaFilesManager.
* Got rid of its Map usage, we're using std::map now instead.
* The media_server is using an unsafe method to transfer areas from the server
to the client. I've changed this for the BMediaFiles API to use Haiku's new
transfer_area() function. However, this seems to cause the above mentioned
problems.
* Improved naming and data exchange structures used for the BMediaFiles API.
* Fixed BMediaFiles leaking its lists.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34554 a95241bf-73f2-0310-859d-f6bbb57e9c96
system_time_nsecs(), returning the system time in nanoseconds. The function
is only really implemented for x86. For the other architectures
system_time() * 1000 is returned.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34543 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed global variable _DormantNodeManager to gDormantNodeManager.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34538 a95241bf-73f2-0310-859d-f6bbb57e9c96
waits for certain events on a given page, NotifyPageEvents() wakes up
waiting threads respectively.
* Used the new feature instead of condition variables for waiting on busy
pages. We save publishing and unpublishing of a condition variable whenever
a page is marked busy. There's only something to do, if there's at least
one thread waiting in the list of the respective cache. The general
assumption is that this is only rarely the case and even if it happens,
there should be only very few threads.
* Added an apparently missing notification in cache_io(). At least I didn't
see the reason for it not being there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34537 a95241bf-73f2-0310-859d-f6bbb57e9c96
to clarify that they never enlarge the area.
* Reimplemented VMKernelAddressSpace. It is somewhat inspired by Bonwick's
vmem resource allocator (though we have different requirements):
- We consider the complete address space to be divided into contiguous
ranges of type free, reserved, or area, each range being represented by
a VMKernelAddressRange object.
- The range objects are managed in an AVL tree and a doubly linked list
(the latter only for faster iteration) sorted by address. This provides
O(log(n)) lookup, insertion and removal.
- For each power of two size we maintain a list of free ranges of at least
that size. Thus for the most common case of B_ANY*_ADDRESS area
allocation, we find a free range in constant time (the rest of the
processing being O(log(n))) with a rather good fit. This should also
help avoiding address space fragmentation.
While the new implementation should be faster, particularly with an
increasing number of areas, I couldn't measure any difference in the -j2
haiku build. From a cursory test the -j8 build hasn't tangibly benefitted
either.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Renamed to AVLTreeBase and moved it into its own header/source file.
- Renamed FindClose() to FindClosest().
- Added CheckTree() method for debugging purposes. It checks the validity
of the tree.
* Added a templatized class AVLTree which doesn't offer a map-like interface
like AVLTreeMap, but rather one similar to BOpenHashMap and SplayTree. It
is more convenient to use, if one wants to store objects that already
contain the key.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34526 a95241bf-73f2-0310-859d-f6bbb57e9c96
necessary and prevent the structures from being used in a union.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* *::Index() is now const, thanks to the BList improvements.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34521 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added operator== and !=
* Added check for list != this in operator=
* Added HasItem() and IndexOf() versions that take const void*, duplicating
the code, since I didn't want to introduce another function call in these
potentially time critical methods.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34520 a95241bf-73f2-0310-859d-f6bbb57e9c96
