vendor_id shall come after the bitfields
Move hpet_address to separate struct definition so we can apply
the correct packed flags.
see also: https://wiki.osdev.org/HPET
Change-Id: Iced005846fedd4b895910e9b61137d5349db5b41
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4859
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* Working under qemu smp 1,2+
* Working on SiFive Unmatched
* x86_64 efi not broken by smp_boot_other_cpus change
Change-Id: I32ebc17913e46ed082be9ade8f56448bbf12f16e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4705
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
For now this is used on RISCV64 to indicate that interrupts will always
be on CPU 0. However, in the future, some architectures may want
or require interrupts to be "steered" in various ways, and this
also paves the way for that.
Change-Id: Iec79870cf5c4898d102d0e624de19602271ae772
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4721
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
we don't sample if the last sample is too recent and use the cached result.
Change-Id: I17ed29bda7fe7276f1a4148b3e1985c9d32ae032
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4101
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This reverts commit 3e8376c6dd.
Reason for revert: Bootloader currently fails to load kernel
It should be added back once the kernel can start.
Change-Id: Iebefbf8681aff4dff09cef7b7eb832b61f7789c7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4579
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: Ifadd47204be1ec688017a567d43dca38c80bd1df
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4431
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Only one code change: for some reason, GCC chokes on the cr3 functions
as macros (throwing errors about invalid registers.) The BSDs have them
as inline functions instead, so they are converted to that here.
Tested and working. There seems to be about a 10% decrease in CPU time
on some compilation benchmarks that I briefly tried.
Change-Id: I31666297394d7619f83fca6ff5f933ddd6f07420
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4515
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Drop ArchUART8260 layer to reduce complexity. It's whole
existance in life was to adjust the mmio alignment.
* Fold architecture mmio alignment into DebugUart
* We could potentially pass a Init(int mmioAlignment)
arg in the future if the macros get too messy.
* Move Barrier code back a layer into DebugUART
* Fixes the arm uart and EFI build
Change-Id: I0f127d902993e9f6e6a03cac8c7c37c0363134bf
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4422
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* We really should get out of the habbit of making up
our own architecture defines.
* __riscv with an additional __riscv_xlen is the
standard that developed... let's just roll with it.
Change-Id: Ieb777d48340ae25a6d66f66133afa0ec5c6da9b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4402
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I6cb31760519c8ba4542d217d6e68439602eda558
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4356
Reviewed-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I4b8f69271ede117701725f9cce30de5bb8ba30bb
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4332
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
the AC flag in eflags/rflags, pushed in the iframe by the CPU, is kept intact after handling the exception, since the fault handler is run with the faulted iframe and does a simple jump. The AC flag would otherwise be set until the syscall returns to userland.
Change-Id: I24f763032ab98029dd162fb411e1541586451606
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4040
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
On sparc, the minimal page size we can use is 8K. Since B_PAGE_SIZE and
PAGESIZE defines were hardcoded to 4K, this resulted in a lot of
confusion in all code trying to manipulate pages.
- Remove cpu.h from headers/private/kernel/arch/*. It dates back from
NewOS and was not used anymore since our kernel uses B_PAGE_SIZE
(PAGE_SIZE was the only thing defined in this header).
- Add posix/arch/*/limits.h with the arch specific page size and include
it from the main limits.h.
- Adjust bios_ia32/debug.cpp which was the only place using the
PAGE_SIZE constant from the deleted headers.
- Change OS.h to define B_PAGE_SIZE to be the same as POSIX PAGESIZE.
- Define PAGESIZE in the build header if the host OS doesn't.
Change-Id: I8c3732cf952ea3c2f088aa16d216678fbf198b96
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3558
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Mostly the same as PowerPC, using OpenFirmware.
Change-Id: I197cc181e92da92c272ee9cfa20c8ad2d2c63d41
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3579
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The manually written code was all wrong (missing branch delay slots,
wrong type of return instruction used, probably more bugs). Use the same
approach as x86 to have inline functions instead, which is much better
for performance and simpler to write.
Change-Id: Iac0fc814c15311658f983da58ac7f9d3edd75b81
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3595
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The definition in SupportDefs.h using gcc builtins is sufficient. No
need for a custom one. The same approach is used on x86 with gcc8
already, but other platforms had not been adjusted to use it.
Change-Id: I3973ff723a31f90cc8d19ac098eb1e85d471d610
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3594
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The sparc ABI reserves the g7 register for this.
Change-Id: I93b81ecef72cde859972ef7b7f6b9991d35f9f29
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3583
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Makes our UEFI bootloader somewhat FDT/DTB aware on all
architectures.
* Will report when an FDT is found, and provide it to kernels
that want it.
Change-Id: I90324fc0579a9c835e60568fa9b654c2df0aba27
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3543
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
implement on x86 with APERFMPERF.
Change-Id: Ia484854c76dee76c5447983de15800a25d791d39
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3213
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
This enables generation of exceptions that are due to uncorrected
hardware errors. The exception handlers were already in place and will
now actually trigger kernel panics.
Note that this is the simplest form of MCE "handling" and does not add
anything of the broader machine check architecture (MCA) that also allow
reporting of corrected errors. As MCEs are generally hard to decode due
to their hardware specifity, this merely makes such problems more
obvious.
Might help to discern hardware issues in cases that would otherwise just
triple fault and cause a reboot.
Change-Id: I9e3a2640458f7c562066478d0ca90e3a46c3a325
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3155
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
