On some 64 bit architectures program and library images have to be mapped in
the lower 2 GB of the address space (due to instruction pointer relative
addressing). Address specification B_RANDOMIZED_IMAGE_ADDRESS ensures that
created area satisfies that requirement.
Placing commpage and team user data somewhere at the top of the user accessible
virtual address space prevents these areas from conflicting with elf images
that require to be mapped at exact address (in most cases: runtime_loader).
This patch introduces randomization of commpage position. From now on commpage
table contains offsets from begining to of the commpage to the particular
commpage entry. Similary addresses of symbols in ELF memory image "commpage"
are just offsets from the begining of the commpage.
This patch also updates KDL so that commpage entries are recognized and shown
correctly in stack trace. An update of Debugger is yet to be done.
Set execute disable bit for any page that belongs to area with neither
B_EXECUTE_AREA nor B_KERNEL_EXECUTE_AREA set.
In order to take advanage of NX bit in 32 bit protected mode PAE must be
enabled. Thus, from now on it is also enabled when the CPU supports NX bit.
vm_page_fault() takes additional argument which indicates whether page fault
was caused by an illegal instruction fetch.
x86_userspace_thread_exit() is a stub originally placed at the bottom of
each thread user stack that ensures any thread invokes exit_thread() upon
returning from its main higher level function.
Putting anything that is expected to be executed on a stack causes problems
when implementing data execution prevention. Code of x86_userspace_thread_exit()
is now moved to commpage which seems to be much more appropriate place for it.
Randomized equivalent of B_ANY_ADDRESS. When a free space is found (as in
B_ANY_ADDRESS) the base adress is then randomized using _RandomizeAddress
pretty much like it is done in B_RANDOMIZED_BASE_ADDRESS.
B_RAND_BASE_ADDRESS is basically B_BASE_ADDRESS with non-deterministic created
area's base address.
Initial start address is randomized and then the algorithm looks for a large
enough free space in the interval [randomized start, end]. If it fails then
the search is repeated in the interval [original start, randomized start]. In
case it also fails the algorithm falls back to B_ANY_ADDRESS
(B_RANDOMIZED_ANY_ADDRESS when it is implemented) just like B_BASE_ADDRESS does.
Randomization range is limited by kMaxRandomize and kMaxInitialRandomize.
Inside the page randomization of initial user stack pointer is not only a part
of ASLR implementation but also a performance improvement that helps
eliminating aligned 64 kB data access.
Minimal user stack size is increased to 8 kB in order to ensure that regardless
of initial stack pointer value there is still enough space on stack.
* If we have a configured network, then we always try to connect to it
as soon as the interface has been brought up.
* If we don't have a configured network and are auto configuring, we
use the AutoconfigLooper to also do initial auto joins.
* Before issuing auto joins we need to wait for scan results to come
in, so we watch for corresponding messages.
For now auto joining is a one shot attempt as the infrastructure to
properly tell reasons for scans apart is not yet there.
This allows to reuse BMessenger objects for different targets, or to
recheck validity after initial creation. With that one can use the same
BMessenger after launching an application that was previously not found
valid for example.
The physical memory map area was not included in the kernel virtual
address space range (it was below KERNEL_BASE). This caused problems
if an I/O operation took place on physical memory mapped there (the
bad address error seen in #9547 was occurring in lock_memory_etc()).
Changed KERNEL_BASE and KERNEL_SIZE to cover the area and add a null
area that covers all of it. Also changed X86VMTranslationMap64Bit to
handle large pages in Query(), as the physical map area uses large
pages.
* This parses the reported CPU name, and tries to translate it to a normal
and concise identifier.
* For example, it will translate "AMD FX(tm)-8320 Eight-core Processor" into
"FX™ 8320" or "Dual Core AMD Opteron(tm) Processor 275 HE" into
"Opteron™ 275 HE".
* This means we can remove AMD strings for those models for which this
function produces useful results.
* Make pointer style consistent, const char* name instead of const char *name.
* Lots of parameter renaming.
* in parameters don't get anything special, just font, or length instead of
inFont, inLength.
* out parameters get a leading _ so *outWidth becomes *_width for example.
* We don't detail private function in the Haiku book and this class has a bunch
so keep the documentation in the file but use regular comments instead.
* Normalize the parameter names between cpp file and header.
* Some minor whitespace fixes.
No functional change intended.
* Replace {Set|Remove}MasterKey() by generic {Set|Remove}UnlockKey()
that works on a keyring.
* Implement {Set|Remove}MasterUnlockKey() on top of that.
* Rename the commands and constants accrodingly.
* Implement setting and removing keyring unlock keys.
As there aren't any more generic meta data containers inside BKey,
there's no real way to distinguish different instances with the same
identifiers. This may be added later, for example the same index system
as used in BMessage could apply.
The application access concept is on the keyring level only for now.
Generally it probably would get pretty complicated and therefore harder
to use when application access needs to be granted on a per key basis.
The type is relevant and required as it determines the type of the
handed in key. The purpose however isn't actually needed and rather
inconvenient to get by depending on the situation.
* The keystore backend will (at least for the time being) reside in a
separate server. This one can be reached via normal messaging, so use
a BMessenger for sending key messages.
* Move the message constants from RegistrarDefs.h into a new
KeyStoreDefs.h that also contains the server signature.
* Update the message constants to reflect the new situation.
* Add all relevant message constants.
* Implement the messaging to send/retrieve key info.
* Implement _Flatten/_Unflatten for sending flat BKey objects.
* Remove application list from BKey, the key can't only differ by
allowed applications as the identifiers would still collide, so the
comparison isn't needed to uniquely identify the key. The applications
can be enumerated via the BKeyStore instead.
* Modified the API greatly to be based on BKey* instead of BPassword*.
* Added BKeyPurpose and used it instead of BKeyType. It is supposed to
indicate the purpose of a key so that an app can look up keys on a
more granular level. The BKeyType on the other hand actually
identifies the type (i.e. subclass of BKey) so an app knows how to
handle a given key or may only enumerate/use keys it is compatible
with.
* Made everything based on a raw data buffer for now, only BPasswordKey
is implemented yet which stores the (0 terminated) string into that
data buffer.
* Removed the additional data BMessage as I don't yet see where it fits
in. While I could imagine adding meta data to a key may be nice it
might be an interoperability concern when keys are shared by
different apps.
* Moved the app functions to the keystore as per the TODO, but not sure
how to actually implement them.
With this commit every class in the storage kit is now documented
in the Haiku book!
Thanks to Ingo, Axel, Vincent Dominguez, Tyler Dauwalder, and
everyone who helped document these classes.
* Remove docs from Resources.cpp (leaving the brief description).
* Reformat Resources.h to style it like so many other header files.
* There is one not-entirely style based change. I renamed the outSize
parameter or the LoadResource method to _size as is our convention for out
parameters.
And clean it up a bit. Kept brief description in source.
* Also added Axel to authors in Path.dox and Path.cpp because his name
appears in git blame as working on the docs and code for the file.
I hope he doesn't mind.
* Delete the docs from NodeInfo.cpp and NodeInfo.h
* I snuck a couple of style fixes into NodeInfo.cpp
* I had to make a small modification to MimeType.dox to prevent it
from overriding the docs of one of the methods in NodeInfo.dox.
* The user of an editor needed knowledge about the editor in order to make
use of it.
* Furthermore, the BPartitionParameterEditor exposed type specific
functionality that it shouldn't know anything about, either.
* We may now define a number of known parameters per editor type; right now
there is only "type" as it's needed by DriveSetup.
* Adapted all disk systems, and DriveSetup to the new API.
* Renamed CreateParamsPanel, and InitializeParamsPanel to *ParametersPanel
in DriveSetup.
* They now share a common base class AbstractParametersPanel.
* edid1_detailed_timing_raw was missing
a field which threw off the sync bits.
* The result was the monitor will receive
a different sync polarity than it requested.
Most monitors handle this, but it is still
a bug
This replaces the use of a few BSD-specific functions, as well
as the direct references to _open/_close et-al.
BFS doesn't support the FTS_NOSTAT directory link count optimization,
and no statfs() function is available, so we simply turn that off.
* Added the aforementioned functions.
* create_area_etc() now takes a guard size parameter.
* The thread_info::stack_base/end range now refers to the usable range
only.
* sys/select.h was not self contained before, this fixes#9327
* index is defined as a function in string.h, fixed resulting name
collision in glut_shapes.c
I made the following changes to the original patch:
* Add const to the cursor setting functions.
* Removed the legacy cursor copying code.
* Minor coding style cleanup.
* use only a single static object (MutableLocaleRoster) instead of
two, which avoids any problems if the order of static object
destruction would destroy RosterData before MutableLocaleRoster
* rename BPrivate::RosterData to BPrivate::LocaleRosterData and move
it into a header and implementation file of its own
This should hopefully fix problems encountered with a clang-compiled
Locale Kit.
After this change, low level cpuidle drivers load the generic cpuidle
module if they can support the underlying platform.
change the intel cpuidle driver accordingly, now it's loaded by acpi
bus manager during boot, although it doesn't depend on acpi
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
This module will load the various lowlevel cpuidle modules' implementations
during initialiation. If it finds one available module, it will change
the global gCpuIdleFunc as its own better one.
When idle, cpuidle module will select the best cstate and enter it by
calling the lowlevel module's implementation.
Signed-off-by: Yongcong Du <ycdu.vmcore@gmail.com>
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* We felt that me adding this didn't really
properly communicate the spirit of the
email approval. You really can't just
'change' a license from MIT without author
approval... so this is superfluous.
