- bitfield definitions of page dirs were reversed... 040 is still wrong though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- move part of mmu handling to mmu-dependant files and extend ops
- implemented 040 mmu init. doing so I spotted a bug in ARAnyM which ignored [ID]TT0. Linux likely doesn't use them but I was too lazy touse temporary page tables. I also noticed bitfields were in wrong order, to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26527 a95241bf-73f2-0310-859d-f6bbb57e9c96
though until we use ACPI for proper PCI IRQ routing through the IO APIC.
Therefore the IO APIC code path is not yet enabled and the IO APIC isn't used.
ISA interrupts would work though, as would PCI interrupts if you'd hardcode
them for your specific configuration.
Note that this change also modifies some parts in the bootloader and in the PIC
setup to make local APICs available even on non-SMP systems. This causes APIC
timers to be used instead the normal PIT if it is available (also on non-SMP
configurations).
Also fixes some general errors in SMP and PIC code as well as some code cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26492 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use the platform object to determine the platform type in system_info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26166 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove unneeded include to make those usable by bootloader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26117 a95241bf-73f2-0310-859d-f6bbb57e9c96
- kernel_m68K almost links now, jsut bails out on the linker script...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26096 a95241bf-73f2-0310-859d-f6bbb57e9c96
- we'll just use decimal chip number (68030, ...) to identify cpu, fpu, and mmu for simplicity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26041 a95241bf-73f2-0310-859d-f6bbb57e9c96
file for hpet implementation. Not yet added to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25773 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
a call chain contains a specific symbol (or address).
* Added a new KDL command "calling" that you can use to get a list of
threads that have a specific function in their call chain.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24594 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented automatic syscall restarts:
- A syscall can indicate that it has been interrupted and can be
restarted by setting a respective bit in thread::flags. It can
store parameters it wants to be preserved for the restart in
thread::syscall_restart::parameters. Another thread::flags bit
indicates whether it has been restarted.
- handle_signals() clears the restart flag, if the handled signal
has a handler function installed and SA_RESTART is not set. Another
thread flag (THREAD_FLAGS_DONT_RESTART_SYSCALL) can prevent syscalls
from being restarted, even if they could be (not used yet, but we
might want to use it in resume_thread(), so that we stay
behaviorally compatible with BeOS).
- The architecture specific syscall handler restarts the syscall, if
the restart flag is set. Implemented for x86 only.
- Added some support functions in the private <syscall_restart.h> to
simplify the syscall restart code in the syscalls.
- Adjusted all syscalls that can potentially be restarted accordingly.
- _user_ioctl() sets new thread flag THREAD_FLAGS_IOCTL_SYSCALL while
calling the underlying FS's/driver's hook, so that syscall restarts
can also be supported there.
* thread_at_kernel_exit() invokes handle_signals() in a loop now, as
long as the latter indicates that the thread shall be suspended, so
that after waking up signals received in the meantime will be handled
before the thread returns to userland. Adjusted handle_signals()
accordingly -- when encountering a suspending signal we don't check
for further signals.
* Fixed sigsuspend(): Suspending the thread and rescheduling doesn't
result in the correct behavior. Instead we employ a temporary
condition variable and interruptably wait on it. The POSIX test
suite test passes, now.
* Made the switch_sem[_etc]() behavior on interruption consistent.
Depending on when the signal arrived (before the call or when already
waiting) the first semaphore would or wouldn't be released. Now we
consistently release it.
* Refactored _user_{read,write}[v]() syscalls. Use a common function for
either pair. The iovec version doesn't fail anymore, if anything could
be read/written at all. It also checks whether a complete vector
could be read/written, so that we won't skip data, if the underlying
FS/driver couldn't read/write more ATM.
* Some refactoring in the x86 syscall handler: The int 99 and sysenter
handlers use a common subroutine to avoid code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23983 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add platform methods for timer as it is platform dependent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23673 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
