* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
a call chain contains a specific symbol (or address).
* Added a new KDL command "calling" that you can use to get a list of
threads that have a specific function in their call chain.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24594 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented automatic syscall restarts:
- A syscall can indicate that it has been interrupted and can be
restarted by setting a respective bit in thread::flags. It can
store parameters it wants to be preserved for the restart in
thread::syscall_restart::parameters. Another thread::flags bit
indicates whether it has been restarted.
- handle_signals() clears the restart flag, if the handled signal
has a handler function installed and SA_RESTART is not set. Another
thread flag (THREAD_FLAGS_DONT_RESTART_SYSCALL) can prevent syscalls
from being restarted, even if they could be (not used yet, but we
might want to use it in resume_thread(), so that we stay
behaviorally compatible with BeOS).
- The architecture specific syscall handler restarts the syscall, if
the restart flag is set. Implemented for x86 only.
- Added some support functions in the private <syscall_restart.h> to
simplify the syscall restart code in the syscalls.
- Adjusted all syscalls that can potentially be restarted accordingly.
- _user_ioctl() sets new thread flag THREAD_FLAGS_IOCTL_SYSCALL while
calling the underlying FS's/driver's hook, so that syscall restarts
can also be supported there.
* thread_at_kernel_exit() invokes handle_signals() in a loop now, as
long as the latter indicates that the thread shall be suspended, so
that after waking up signals received in the meantime will be handled
before the thread returns to userland. Adjusted handle_signals()
accordingly -- when encountering a suspending signal we don't check
for further signals.
* Fixed sigsuspend(): Suspending the thread and rescheduling doesn't
result in the correct behavior. Instead we employ a temporary
condition variable and interruptably wait on it. The POSIX test
suite test passes, now.
* Made the switch_sem[_etc]() behavior on interruption consistent.
Depending on when the signal arrived (before the call or when already
waiting) the first semaphore would or wouldn't be released. Now we
consistently release it.
* Refactored _user_{read,write}[v]() syscalls. Use a common function for
either pair. The iovec version doesn't fail anymore, if anything could
be read/written at all. It also checks whether a complete vector
could be read/written, so that we won't skip data, if the underlying
FS/driver couldn't read/write more ATM.
* Some refactoring in the x86 syscall handler: The int 99 and sysenter
handlers use a common subroutine to avoid code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23983 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add platform methods for timer as it is platform dependent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23673 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
We will use SRP (supervisor root pointer) register to hold the current thread pointer.
Its use by the pmmu is optional and I don't plan on using it.
There are 32 other bits left.
Wonder if weshouldn't use it for system_time() instead... will see, but there are no other usable regs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22696 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the private VM types are including vm_types.h now.
* Removed vm_page, vm_area, vm_cache, and vm_address_space typedefs; it's
cleaner this way, and the actual types are only used in C++ files now,
anyway.
* And that caused changes in many files...
* Made commpage.h self-containing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22329 a95241bf-73f2-0310-859d-f6bbb57e9c96
Can be enabled by defining KERNEL_BREAKPOINTS in arch/user_debugger.h
and will provide the arch_{set,clear}_kernel_{break,watch}point()
function. Hitting a break-/watchpoint will throw the thread into KDL.
* Finally added a comment, what's the point of
i386_reinit_user_debug_after_context_switch(), since I wonder every
time I see it. Should be optimized aways soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22150 a95241bf-73f2-0310-859d-f6bbb57e9c96
* On exec() the new function thread_reset_for_exec() is called which clears the signals
and cancels an eventually set alarm. Both things weren't done before...
* Some minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21989 a95241bf-73f2-0310-859d-f6bbb57e9c96
* PowerStatus is now using this API when compiled for Haiku.
* Note, I'm not sure why yet, but running PowerStatus in the background
crashes at least my laptop after some time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21154 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
the userland stack in an unsafe way - moved that stuff to arch_thread_enter_userspace(), too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19778 a95241bf-73f2-0310-859d-f6bbb57e9c96
turned off - accessing userland memory. Now, arch_thread_enter_userspace() does that
job, and as a result, may also fail.
* dump_thread() now directly prints the info of the current thread when used without
argument (rather than iterating the thread list to look for the current thread).
* If arch_thread_init_tls() fails upon thread creation, the function will now return
an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19775 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch dependent code (they will be removed as soon as someone else
asks for these interrupt lines).
* Added an interrupt driven keyboard handler to the kernel that uses
this technique. As a result, you can now press F12 to enter the kernel
debugger before the input_server has been started, and Control-Alt-Delete
should reboot the system (actually I did not test the latter yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17806 a95241bf-73f2-0310-859d-f6bbb57e9c96
