These worked in identical fashion to what the default copy
constructors would be, but their mere presence marks the class
as being "non-trivially copyable," which means that memcpy'ing
it is now a -Werror on GCC 8.
We have to be careful when making this change, though: classes
which *are* trivially copyable can be passed inside registers
on x86_64, so changes like these break ABI in a dangerous way.
These classes is private, so it should not be a problem, but
for other classes (e.g. BRect, BPoint) we cannot fix them
properly right now.
add-ons" is set.
Confirmed to fix#14361. It is finally possible to un-brick an install
with a bad system library in non-packaged without having to use another
install to do so.
Change-Id: Iafea7821f02cb34e77c766b1f97d1c19206b1081
Reviewed-on: https://review.haiku-os.org/c/1452
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
All of Barrett's individual reverts have been squashed into this
one commit, save a few actual bugfixes.
Change-Id: Ib0a7d0a841d3ac40b1fca7372c58b7f9229bd1f0
This allows cpu_type.h to be used in C-based software,
with the get_cpu_*() functions all accessible via C as well
as C++ code.
Tested changes with sysinfo, AboutHaiku and Pulse.
Change-Id: Ide87d8e3f2ba5f0f1890f385b1ac90c677bcc274
Reviewed-on: https://review.haiku-os.org/c/1453
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
app_server just passes the add-on path around.
Maybe we should make sure the add-on can be loaded when setting it.
Change-Id: I3acd3299782a22c1666bd5435dbf3d8053e359fa
Reviewed-on: https://review.haiku-os.org/c/1430
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* mutex_destroy() only checked wether or not there were waiters,
not if the lock itself was presently held by another thread.
Now we do, which should make #15015 panic much earlier instead
of trying to use freed memory.
* mutex_transfer_lock() and recursive_lock_transfer_lock() did
not check that the calling thread actually owned the lock.
Now it does, which should trigger asserts if anyone tries
to do this.
Copied from PPC with the hooks for Apple hardware removed.
To be completed with the actual PCI bus implementation for Sun machines.
This is where we start doing machine specific stuff, apparently.
Change-Id: I06af4de9621e9d40593d153642478d928083e49a
Reviewed-on: https://review.haiku-os.org/c/1364
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Kernel is 64 bit, and we won't need a 32bit load base.
Change-Id: I729bab01c8f71083002db061e153b0e5052b9a1c
Reviewed-on: https://review.haiku-os.org/c/1326
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* firewire and freebsd_network expect the macros come from
sys/param.h, as this is one of the places FreeBSD defines them
* All others are Haiku-native and can use Be-style macros.
Add a platform cleanup hook before starting the kernel. The openfirmware
and PXE loaders clean up their network stack there, while the other
loaders currently do nothing.
This closes ticket #6166
Change-Id: I34765892dfd9b2310c6af97c9ff7d414afae49e5
Reviewed-on: https://review.haiku-os.org/c/50
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ia2a86d8814d06950ea2d2d19d966c642d26f81d6
Reviewed-on: https://review.haiku-os.org/c/1302
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Add various stubs to fix undefined references. No implementation for
anything yet.
Change-Id: I2d398bc2369d099e3a35f0713058d6a5edc6801d
Reviewed-on: https://review.haiku-os.org/c/1138
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This behaves mostly like a pointer, but pointer maths works in bytes,
not the native object size.
It avoids casting to char* and back when doing byte-based pointer math,
making the code easier to read.
Change-Id: I6a8681a398345f0c7d419a2cfe7244d972ffa62f
Reviewed-on: https://review.haiku-os.org/c/1086
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Add empty implementation of timer, elf, vm, debugger support, to let the
kernel link.
Also add the kernel linker script.
Change-Id: If0795fa6554aea3df1ee544c25cc4832634ffd78
Reviewed-on: https://review.haiku-os.org/c/1108
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Previous commit adding these was merged very quickly, so here's one
more...
Change-Id: I23c424db7631db1f0ec48e2d0ae47c8409ae6af2
Reviewed-on: https://review.haiku-os.org/c/1088
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Gets the stage0 bootstrap to run.
Imlementation is probably nonsense at this point.
Change-Id: I10876efbb54314b864c0ad951152757cdb2fd366
Reviewed-on: https://review.haiku-os.org/c/1061
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The kernel version is only partially tested.
Change-Id: I9a2f6c78087154ab137eadbced99062a8a2dd688
Reviewed-on: https://review.haiku-os.org/c/918
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
sdhci:
- Add semaphore for interrupt management
- Add basic operations (setting clock, executing a command)
- Add early initialization (clocks and power up)
- Wrap the bus in a C++ class to ease usage
- Expose API to MMC bus manager
- TODO: manage card insertion and removal interrupts
- TODO: use MSI when available
mmc_bus:
- Implements SD card management independant of the way we access the bus
(later on different drivers can provide the same API as SDHCI)
- Worker thread to do the initialization
- Implement card initialization process up until getting an RCA from the
card. This is the generic part to assign an ID to the card, after this
point commands can be targetted at the specific card so it can be
handed over to the mmc_disk driver.
- TODO: initialization for non-SDHC cards which do not reply to CMD8.
Change-Id: I71950ca3ce206378a68fa7f97c19f638183d6cdd
Reviewed-on: https://review.haiku-os.org/c/1032
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Nothing that uses this API at present needs a const iterator (and
as far as I could see, nothing ever called Remove() on the iterator.)
But this is now how HashMap's API works, so let's be consistent.
Changes are pretty straightforward. The iterator is now const
again, but can be passed to the hash table itself for removal
of the current item.
Change-Id: Ifd3c8096ffb187a183ca5963ed69a256562a524f
Reviewed-on: https://review.haiku-os.org/c/1042
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The HashMap and HashSet classes are copied from userlandfs. The
HashMap one works as-is as it's already used in userlandfs; the
HashSet does not even compile yet.
Change-Id: I1deabb54deb3f289e266794ce618948b60be58c0
Reviewed-on: https://review.haiku-os.org/c/1041
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
There isn't much use for a class that can only compute the dates of
two minor and one major holiday. Probably in the future the Locale Kit
could be extended to expose ICU holiday APIs, but seeing as that
is a less-used functionality, this can just be removed altogether
for now at least.
Change-Id: I18be044be7d5c6896295ed85d294abeea90b8bb0
Reviewed-on: https://review.haiku-os.org/c/1037
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It is only used as an argument to _kern_load_image directly, not to
any of the load_image functions in image.h, so it belongs in a syscall-
specific header like other such constants.
No functional change intended.
* This iSCSI implementation only worked on PPC big-endian atm.
* We're pretty sure iSCSI support in haiku_loader doesn't make
much sense anymore. iPXE on (on arm,x86,etc EFI/BIOS platforms)
supports iSCSI boot of disks.
* Haiku could use a iSCSI driver add-on, but it would exist much
higher up and likely use standard drivers vs bare-minimum iSCSI
target impementations.
* Leaving TCP and adding to all arches since it could make sense
for haiku's native network disk subsystem or network debugging?
Change-Id: Ic181b93a1d8ffd77f69e00e372b44b79abbddb42
Reviewed-on: https://review.haiku-os.org/c/899
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Registrar schedules an event every second to do
fRoster-CheckSanity(). This uses 2.5% cpu on my machine
when idle. Changing it to five seconds lowers it to 0.1%
waddlesplash then pointed me to this bug which changes it
to watch for team deletion and call fRoster->CheckSanity()
As I know little in this area, it's mostly based on what
LaunchDaemon does in MessageRecieved.
Change-Id: Ie69f9399cab41d2d492d469b5d3dc88e6080c15c
Reviewed-on: https://review.haiku-os.org/c/876
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The old fixed-rect method was very error-prone in corner-cases,
resulting in half-visible (cut off) parameters, incorrectly
sized controls, etc. on various devices, which often made it
impossible to use.
While there are still a few rough edges (scrollbar behavior could
be further improved, though it's already much better than it was before),
this method is much better than the previous one.
Fixes#11592 and related tickets.
Change-Id: I65175f760bda98e42d1fc68ba8e526470bf17c25
Reviewed-on: https://review.haiku-os.org/c/889
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Implemented against POSIX-1.2013.
The implementation POSIX requirement thats setpriority() shall affect the
priority of all system scope threads only extends to POSIX threads. This
is implemented by modifying the default attributes for newly spawned
pthreads.
It is not possible to modify the default pthread attributes for different
processes with the current implementation, as default pthread attributes
are implemented in user-space. As a result, PRIO_PROCESS for which and 0
for who is the only supported combination for setpriority().
While it is possible to move the default attributes to the kernel, it
is chosen not to so as to keep the pthread implementation user-space only.
POSIX requires that lowering the nice value (increasing priority) can be
done only by processes with appropriate privileges. However, as Haiku
currently doesn't harbor any restrictions in setting the thread priority,
this is not implemented.
It is possible to have small precision errors when converting from Unix-
style thread priority to Be-style. For example, the following program
outputs "17" instead of the expected "18":
#include <stdio.h>
#include <sys/resource.h>
int
main()
{
setpriority(PRIO_PROCESS, 0, 18);
printf("%d\n", getpriority(PRIO_PROCESS, 0));
return 0;
}
The underlying reason is because when you setpriority() both 18 and 19
are converted to the Be-style "2". This problem should not happen with
priority levels lower than or equal to 20, when the Be notation is more
precise than the Unix-style.
Done as a part of GCI 2014. Fixes#2817.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Co-authored-by: Leorize <leorize+oss@disroot.org>
Change-Id: Ie14f105b00fe8563d16b3562748e1c2e56c873a6
Reviewed-on: https://review.haiku-os.org/c/78
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Registrar schedules an event every second to do
fRoster-CheckSanity(). This uses 2.5% cpu on my machine
when idle. Changing it to five seconds lowers it to 0.1%
waddlesplash then pointed me to this bug which changes it
to watch for team deletion and call fRoster->CheckSanity()
As I know little in this area, it's mostly based on what
LaunchDaemon does in MessageRecieved.
* Also implemented recording DrawString(string, length,
BPoint[] locations), which was previously not recorded at all.
* Also implemented playing back recently added drawing commands
in PicturePlayer.cpp. I don't quite understand what this is
actually used for, but it seemed it was forgotten. I just followed
the pattern already established in the code.
* The other important bit in this change is to update the pen
location when it is needed while recording a BPicture. Often
the BView will use PenLocation() in order to transmit drawing
commands to the app_server which use absolute coordinates only.
This isn't actually so nice, since it means the client has to
wait for the server to transmit the current pen location. If there
were dedicated link-commands for pen-relative drawing commands,
the client could just keep sending without waiting for the server.
In any case, the app_server needs to update the pen location in
the current DrawState and even the DrawingEngine even while
recording a picture, because some next command may need up-2-date
state information, such as the font state and the pen location.
* I have not yet tried to find /all/ instances where the DrawState
needs to be updated while recording. This change should repair
/all/ font state changes, all versions of drawing a string, and
all versions of StrokeLine().
Change-Id: Ia0f23e7b1cd058f70f76a5849acb2d02e0f0da09
Reviewed-on: https://review.haiku-os.org/c/817
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
* We don't aim to replicate this functionality. I don't
think this will be useful at all in future iterations.
Originally I planned to rewrite it on top of the new
BMediaFormat, but now I am of the hopinion this is
greatly unneeded.
There was no synchronization of the check of the done flag and the
waiting thread suspending to wait for it. It was therefore possible that
the new team both set the flag and triggered the wakeup of the waiting
thread in that time window, causing it to miss both the set flag and the
thread resumption.
Use a condition variable instead.
Fixes#13081.
Change-Id: I93c45db8dd773fe42b45c4b67153bcd39e200d3b
Reviewed-on: https://review.haiku-os.org/803
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This allows heap implementations to initialize and clean up any thread
specific structures. The current default hoard heap does not use these.
Note that the thread exit hook will not be called for the main thread as
the heap may be needed during process termination (__cxa_finalize for
example).
Change-Id: I703fbd34dec0d9029d619a2125c5b19d8c1933aa
Reviewed-on: https://review.haiku-os.org/799
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This file is included, directly or indirectly, by most of the
kernel-space C++ code, and so importing the entirety of "std"
seriously pollutes the global namespace.
So instead, just import "std::nothrow", which is the only thing
we really want in the global namespace. Tested on both GCC2
and GCC7 and seems to work just fine.
While I'm here, also update the include guards and copyright
header to match the standard format used elsewhere.
Fix 'true / false' value is implicitly cast to the integer type.
Change-Id: I2f72fcd34d2d97d20e2a98ed5efe25919a485c9d
Reviewed-on: https://review.haiku-os.org/739
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* This should be probably uniformed with the future
media kit format defs. Not sure why those formats are
separated and used only by the codec kit. Eventually,
if needed can be changed to some name that differentiate
them better than media defs.
* Those classes are not ready for public consumption. Ideally,
I'd add a well designed BCodecRoster wrapping them. This is part
of the general cleanup I am doing to get the code in a good state
before going to finalize the design.
* I don't plan to reintroduce BMediaFile in the media2 API, and
I'd like to remove any (explicit) usage of entry_refs and things
like that.
* I plan to introduce BMetaData and BMediaFormat which is going
to be different than what we do now.
* We need to explicitly use the mime type when it's available and
it is another design consideration when CodecRoster will be introduced.
The size was in fact the count of physical entries that were used. That
number must necessarily be the same as the number given when adding to
the queue, so that number isn't really interesting. Consequently none
of the users of that API made use of it.
Return the used length instead, which is the way virtio signals how much
valid data resides in the dequeued buffer. This is for example important
to know the frame length of incoming packets in virtio_net.
* Adds max width and height arguments to
instantiate_deskbar_(item|entry).
* Old applications just stay with a 16x16 scaled icon, though.
* All used apps within the repository are converted to the new call
besides the input_server input method icon (that will need further
API changes in the input_server).
Change-Id: I29cc439396917be2c24135888459d31364997dff
Reviewed-on: https://review.haiku-os.org/656
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* I have not idea what this is for. Seems stuff from a long time ago
when for some reason someone wanted an audio driver implemented in
a kernel module. It is not used anywhere. If someone feels this should
be reverted please let me know and add an explanation.
string_for_size uses KiB, etc., and so when the two are combined (e.g.
pkgman's progress display), it looked especially strange to have two
different units.
TeamDebugger:
- When a job is aborted, instead of calling into the user interface directly
to reset the status message, post a message to do so. Also, only post the
message if we aren't already in a terminating state. Otherwise, if jobs
were still running while the team debugger is executing its destructor, it
would attempt to make calls to the already destroyed user interface. This
bug has likely been with us for quite some time, but was hidden by incorrect
ref counting in the past (see #12343).
Replace 'class' with 'struct', since they are already defined as 'struct'
in PackageInfoAttributeValue.h
Pointed by clang [-Wmismatched-tags]
Change-Id: I094d32c3444fe4299a3afe0872ade296f92debf9
Reviewed-on: https://review.haiku-os.org/471
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Remove index of portInfos[], since gcc8 warns -Werror=array-bounds
in UserlandFSServer::_Announce().
Change-Id: I79c4ee9d7dc301c54454974698ebd88d1a30750a
Reviewed-on: https://review.haiku-os.org/428
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Consolidate all fdt code into fdt bus_manager
* Build boot and kernel static libraries
Change-Id: I2a69cd7e1f1276999a80734ff12918fd49b599e5
Reviewed-on: https://review.haiku-os.org/440
Reviewed-by: Alexander von Gluck IV <kallisti5@unixzen.com>
memset uses rep stosb on x86 during boot, with memory
not set to write-combining, which makes it slow.
Instead we do aligned writes of 2 x four bytes at once.
Only clear the minimum of size and width * height * 4
UEFI framebuffer size can be huge, upto 512MB here,
and rep stosb seems to be around 25-30MB/s
This is written as generic as possible to work on
old compilers and different platforms, without
expecting boot memset to be optimized.
This makes it almost unnoticable compared to not
clearing.
It seems not all of the kernel includes this, but some use new/delete
anyway. Further, operator delete[] was not implemented at all.
Possibly fixes the ARM build.
Writes to videomem is slow without memory remapping
Can't do the mapping without leaving UEFI, so skipping
the clear. Afaict it should always be cleared by UEFI
This saves ~10 seconds of booting on my machine
(1920*1080*4 bytes)
EFI video mode (should have been it's own commit)
* Only do strcmp if there are enough params
* break when found
This reverts commit ec1b18c58a.
This was not well enough reviewed, and it seems that at least some
consumers of the old API (e.g. WebPositive) need more than the new one provides.
Change-Id: Ie7ad1fc70dab889922424298661504b00f66d31d
Fixes#9137
Move scroll bar drawing into HaikuControlLook
Added B_SCROLLABLE flag to BControlLook
Update FakeScrollBar in Appearance to also draw using HaikuControlLook.
Focus works on scroll bars again, used by FakeScrollBar... and probably
nowhere else.
Added private _ScrollingEnabled() convenience method to BScrollBar and
use it in a few places making.
Create ScrollBarPrivate.h header to share a couple of scroll bar related
enums with HaikuControlLook that come from BeOS Scroll Bar prefs.
Stuff arrow_direction enum into BScrollBar::Private as it has been
succeeded by a similar enum already present in BControlLook and is only
around now for BScrollBar::Private::DrawScrollBarButton.
Change-Id: Idc31ee41de091ba45ded2f0315a004af00143803
Some users of MK_ERROR pass in parameters from a variable called "res",
which is obviously not what they want to do, as that will use this "res"
and not theirs.
Spotted by Clang.
This reverts commit c558f9c8fe.
This reverts commit 44f24718b1.
This reverts commit a69cb33030.
This reverts commit 951182620e.
There have been multiple reports that these changes break mounting NTFS partitions
(on all systems, see #14204), and shutting down (on certain systems, see #12405.)
Until they can be fixed, they are being backed out.
* define compat_thread_info, compat_rlim_t, compat_rlimit and
compat_thread_creation_attributes to be used when applicable in compatibility
mode.
* handle 32-bit types in _user_spawn_thread(), _user_get_thread_info(),
_user_get_next_thread_info(), _user_getrlimit(), _user_setrlimit(),
other syscalls are compatible as is.
* init TLS for compatibility mode threads.
Change-Id: I483ba95e6198ddac9d240671bcb56fcd2ad831d2
* in load_image_internal(), elf32_load_user_image checks whether the binary
format requires the compatibility mode.
* we then set up the flag THREAD_FLAGS_COMPAT_MODE and the address space size.
* the compatibility mode runtime_loader is hardcoded with x86/runtime_loader.
* if needed, the 64-bit flat_args structure is converted in-place to its 32-bit
layout.
* a 32-bit flat_args isn't handled yet (a 32-bit team execs a 64-bit binary).
Change-Id: Ia6a066bde8d1774d85de29b48dc500e27ae9668f
* define compat_area_info to be used when applicable in
compatibility mode.
* handle 32-bit types in _user_reserve_address_range(), _user_get_area_info(),
_user_get_next_area_info(), _user_transfer_area(), _user_clone_area(),
_user_create_area(), _user_map_file(), other syscalls are compatible as is.
* _get_next_area_info() doesn't work well with a 32-bit address cookie (address
could be in 64-bit range). Instead use _compat_get_next_area_info() which uses
the area id as cookie, though the areas are not ordered by address any more.
Change-Id: Ic7519ca8824aa2d534b0f03ea75a1bf6ae321535
* handle 32-bit types in _user_send_signal(), _user_sigaction(), _user_sigwait(),
_user_set_signal_stack(), _user_restore_signal_frame(), other syscalls are
compatible as is.
Change-Id: I4c8dc47bfa80f36e363d444d2a5a7be6c621606d
* define compat_image_info, compat_extended_image_info
to be used for respective 32-bit types of syscalls in compatibility mode.
* handle 32-bit types in _user_register_image, _user_get_image_info,
_user_get_next_image_info, other syscalls are compatible as is.
Change-Id: Ibbd33e6796208dfa70d869e36bf745bc3e18d330
* define compat_flock, compat_timespec, compat_stat, compat_attr_info,
compat_fs_info, compat_fd_info to be used for respective 32-bit types
of syscalls in compatibility mode.
* handle 32-bit types in common_fcntl(), _user_read_stat(), _user_stat_attr(),
_user_read_index_stat, _user_read_fs_info, _user_write_fs_info,
_user_get_next_fd_info, other syscalls are compatible as is.
Change-Id: I5b372169fe142f67b81fd6c27e0627d5119ba687
This reverts commit 4f059c1fc5.
From discussion on the mailing list, it seems I was correct the first time
and Broadwell is Gen8. The confusion comes from the SER5/SOC distinction,
which is not in the Linux driver, and I still don't know which one it really
belongs in.
* File locks created by flock should only apply for the file descriptor
that was used to lock the file. Another fd on the same file should then
be denied access (calling flock should fail).
* fcntl based locks, however, are in a separate namespace and are global
to a team.
* This issue was found when running webkitpy test suite, and should close
ticket #13795.
* Don't use session or team as comparison in release_advisory_lock(), as
that information might not be available anymore (e.g. when called from
Team::~Team()). This fixes#14121.
Change-Id: I9efb96cfcefe7e72b0060220c635a665e7e643cc
Co-authored-by: Axel Dörfler <axeld@pinc-software.de>
* GCC7's static analysis found this one and it still
took #gcc and me a while to spot. Nice work gcc7!
* Should help DisplayPort training issues :-)
Change-Id: I9b47f13c95e622a2c08ff329ec9c3fc7e3db493d
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
the size of BAffineTransform is architecture dependent, so we transmit
its contents in a standard array instead.
Change-Id: I907110742168846a869a48bb2d116cc5292ec7d0
* free interrupts, free queues, return to init state.
* this will be used by virtio_net on interface uninit.
Change-Id: I7c1e6facc37cf6bfe19628576fdf2c0bac9e5c38
* enable to iterate on available entries in one interrupt call.
* negociate -> negotiate, (void *) -> (void* ), thanks axel and philippe!
Change-Id: Ie2d290797abcbf4c0f3cb5bfff71d091bb800fa6
It was limited to a uint32 and could for example be overflown by the
slab MemoryManager that uses size_t on a 64 bit system.
This aligns the signature with create_area() that already uses size_t
for the size argument.
Note that the function is currently private, so the impact should be
limited.
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
* At this point we want to avoid the user calling the callbacks
in the form of BMediaConnection. Instead we force to use the
BMediaInput and BMediaOutput versions.
TypeHandler:
- Add name field for presentation purposes. Adapt subclasses accordingly.
TypeHandlerRoster:
- Add methods to count and retrieve all type handlers for a given type,
and adjust CreateValueNode to allow for passing in an explicit handler.
Adjust callers accordingly.
VariablesViewState:
- Add helpers to store an explicitly chosen type handler for a node.
TypeHandlerMenuItem:
- ActionMenuItem subclass that takes care of reference management
for its contained type handler.
VariablesView:
- Add context menu for choosing type handlers if applicable. Implement
support for invoking said type handlers in a similar manner to explicit
typecasts.
- Adjust saving/restoring the view state so that hidden nodes are taken
into account as well. This is necessary since it may be the case that
the handler had to be applied to the hidden child rather than the visible
node (i.e. the BMessage handler when applied to a pointer to a BMessage).
All together, these changes allow choosing to switch between views of a type
when the Debugger has multiple handlers for it. For example, for BMessages
this allows switching between displaying the raw underlying structure vs
the decoded message content.
SMAP will generated page faults when the kernel tries to access user pages unless overriden.
If SMAP is enabled, the override instructions are written where needed in memory with
binary "altcodepatches".
Support is enabled by default, might be disabled per safemode setting.
Change-Id: Ife26cd765056aeaf65b2ffa3cadd0dcf4e273a96
The scheduler uses the load tracking logic to compute the load of
threads to be enqueued into the run queue. The time delta between the
last enqueue and the next enqueue may grow very large for threads
that mostly wait on conditions. In such cases the int "n" period count
variable would become too small and wrap around, leading to an
assertion failure.
For this to happen, the thread in question would have to have slept for
at least ~25 days and then wake up. Threads often affected would be ones
waiting for some other process to end, for example shell threads waiting
for a long running process to exit.
Fixes#13558.
Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.
This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
The feature gives user ability to choose the position of notifications
out of Follow Deskbar, Lower Right, Lower Left, Upper Right and Upper
Left. Fixes#9749 - Notification_Server: add the ability to choose the
position of notifications (easy).
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
The base VMCache class changed to the generic_ types with their
introduction in in *2011* (435c43f591),
but these classes were never properly adapted. These functions should not
be called here (they panic() -- but the base class only returns B_ERROR,
so that is a difference at least.)
Found by Clang's -Woverloaded-virtual.
* Expects its config files in /boot/home/test_launch.
* Uses standard I/O, and is always in user mode.
* Also added test_launch_roster command that is able to talk to the test
server like it does to the real thing.
Fixes#13733.
Unlike written in the ticket, the string length is 136 (not 135),
and the code checks for rejects anything greater or equal to the max
value. So set the constant to 137.
At present, does not work (it fails to properly set up interrupts,
resulting in thousands of unhandled ones which all but grinds the system
to a halt) but this at least is some progress.
Accelerant interface:
Introduce new hooks B_SET_BRIGHTNESS and B_GET_BRIGHTNESS. Brightness is
a float in the 0..1 range.
App_server:
Forward brightness things between BScreen and the accelerant.
intel_extreme:
Implement the hooks. Note that this only works for laptop panels, but
the driver will pretend to support it in other cases as well.
Screen preferences:
If the accelerant supports the B_GET_BRIGHTNESS hook, allow to set
brightness with a slider. Otherwise, the slidere is hidden and these
changes aren't visible.
The UDP service does not own the UDP sockets. When shutting down,
inform the bound sockets that the service is no longer available.
This allows subsequent method calls to error out cleanly.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Add a cleanup function net_stack_cleanup() that calls a new NetStack::ShutDown() method.
Make sure this method works even if the network stack was never initialized.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Was nothing but a slightly-stripped version of the nvidia driver,
not touched substantially in nearly 10 years, and the cards it was
originally going to support (but never got anywhere near so) have long since
been deprecated.
All of its prior functionality has been moved into HaikuControlLook.
This paves the way for customizeable control looks, which I intend to implement
in the future as part of decorators.
This is being pushed now because libbe ABI was already broken due to the
Notifications changes, so this is riding that so we only have to do a mass
rebuild once.
* Caching these values could result in missed
state changes.
* We may want to re-implement later.
* Highlights that all DP AUX communication is broken
during my testing.
Notifications preflet:
-Use sliders instead of text fields for width and timeout
-Remove icon size choice (mini icon looks horrible)
-Consolidate both "Enable" checkboxes into one
-Fix Revert button, remove Apply button, add Defaults button
-All changes to settings saved immediately
-Live example notification message shown when settings changes are made
-Add setting for individual apps to specify whether their notifications
should be muted
-Remove history list (to be implemented later)
BNotification class:
-BNotification records the signature and name of application that
created it
-New functions to get source application signature and name
Notification Server:
-Notification pop up view layout fixes and bold font size fix
-Remove notifications history from AppUsage class (will be saved in
cache instead)
-Remove vector of NotificationView objects which isn't needed
-Get source application info from notification object, not the received
message which is not reliable
* Use BDateFormat::GetDayName() to fetch weekday names.
* Use appropriate symbol width(Mon, Mo, M) depending on the frame width.
* Provide functionality to update day name header in case of locale
preferences change.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* stop the extractor processing before deleting the source.
* crash happened in MediaPlayer FilePlaylistItem::_CalculateDuration().
* was a regression introduced in hrev50671.
* fixes#13156.
* Issue: In BCalendarView presently, there is no notion of a current date
and the current date is not highlighted. So in the deskbar tray calendar
which uses BCalendarView, we cannot know the current date once we change
the selected day.
* Fix: Make BCalendarView accept pulse messages, check for system date
with every pulse message and update the current date accordingly.
Highlight the current date by rendering its day number text in a
different color.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
ticket : #13592
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
Thus, BeOS compatibility is preserved (and there is no risk of
breaking GCC5<->GCC2 interoperation on hybrid builds.)
This commit only makes the actual change, the build fixes are
in the next commit.
This allows the loader to skip BFS partitions that don't contain
a bootable system. Useful when you have a BFS data partition that
comes before the system partition when iterated over.
Currently, only the UEFI loader actually returns more than one
possible partition.
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
* This allows KPath to not allocate a buffer when initialized
without path.
* Added test cases for this.
* Added test for LockBuffer().
* Enhanced tests to allow building them in debug mode.
* Moved calling vfs_normalize_path() into own private method.
* Improved error codes; B_NO_MEMORY is now only returned if the
allocation actually failed.
* If used with LAZY_ALLOC, Path() and LockBuffer() are now allowed
to return a NULL path.
When both Backgrounds and Screen are open, if the workspace color is changed
in Backgrounds the monitor preview in Screen will now refresh to the new color.
Also added a BAlert in BackgroundsView.cpp when failing to change the
background image.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Fixes#13286.
* It's very important to use a negative value to identify
non valid or uninitialized connections. Additionally, it's preferred
to don't interfere with media_kit types as long as the framework use
it in the backend.
* Add special handling for reading the BEOS:TYPE attribute to supply
on-the-fly fake MIME types for FUSE module filesystems, the same
way it's done in our FAT and NTFS FS modules
* Reuse the mime_ext_table which we already have and put it into a
shared location so we don't get further extra copies of it
* Add a way for a FUSE module to supply Haiku-specific extensions.
This allows it to integrate better with Haiku while only requiring
minimal changes on the FUSE module itself.
* For now, there is only one extension: another function pointer for
"get_fs_info", which lets the FUSE module fill in an fs_info struct.
FUSE provides no good way to otherwise communicate extra information,
such as the volume flags (e.g. B_FS_IS_SHARED).
* A FUSE module can signal that it supports the Haiku extensions by
a) defining HAS_HAIKU_FUSE_EXTENSIONS before including the fuse
headers
b) setting the global variable gHasHaikuFuseExtensions to 1 in
its initialization
Otherwise, the Haiku extensions are completely invisible to the
FUSE module.
Update all in-tree consumers of the BJson API to match. Also added
const-qualifiers to the BString versions of the API, and added the leading
"_" to the header guards.
... reverse this to avoid confusion, you'll see why in next commit.
No functional change intended in this commit, functional change is in the
next commit.
This is an implementation of pthread barriers pursuant to the relevant specification.
Barriers are essentially a special case of conditional variables,
such that all threads waiting on one are woken up when the number of
waiters reaches a number provided at the initialization of the barrier.
In view of that, this implementation mimics the implementation of pthread_cond,
except it is more specialized and self-contained.
Signed-off-by: Jérôme Duval <jerome.duval@gmail.com>
* Fixes problems with setting the partition name after uninitializing
a partition in DriveSetup. Previously, UninitializeJob() was
followed by SetStringJob(), but the kernel was updating the
change counter for the parent partition when uninitializing a
partition, leading to SetStringJob() having an incorrect change
counter for the parent partition. Now the parent change counter
will be correct when SetStringJob() runs.
* Also defer signals while registering fork hooks.
* While malloc provides fork heap hooks which lock the heaps and unlock/reinit,
malloc_debug provides empty hooks.
* Ideas suggested by Ingo, patch reviewed by him. Thanks a lot!
* Also call fork parent hooks on failure.
* Solve locks-up when combining multithreading and process forking, should help
with #13111.
* There's no need to supply ways to mismatch the buffer duration
and size. Anything should reflect the media_format, this is at least
fixed on API level.
* There's no point actually in providing BTimeSource dependant
functionality. If and when there will be need for something like
that, possibly never, an higher level solution will be integrated.
Team:
- Adjust report generation event to include a final status code for listeners.
CliContext,TeamWindow,ReportUserinterface:
- Use aforementioned status code to indicate whether report generation
succeeded or failed.
DebugReportGenerator:
- Notify listeners if report generation fails. This may have previously
been responsible for some bug reports where it was indicated that the
debugger hung without exiting after being asked to save a report from
a crashed app.
- When dumping disassembly, retrieve it directly if necessary rather than
requesting it via the user interface listener. This also fixes the quirk
that requesting to save a crash report while looking at the source code
of a function would trigger switching it to disassembly visually.
- When walking the list of threads to dump, acquire references to all of
them before starting. Otherwise, it was potentially possible for a running
but not crashed thread to exit while we were generating the report, leaving
us with a pointer to a deleted thread. This was most likely the cause of one
of the crashes reported in #13082.
- When receiving the notification that source code state has changed, clear
the waiting function. Otherwise, it was potentially possible for us to get
other state change notifications, leading to the data semaphore being
released too often. This would then cause later potential waits such as
the stack frame memory dump to not actually wait when they should,
potentially leading them to dereference objects that weren't yet ready.
This fixes another of the crashes in #13802.
- Split MessageCodes.h into a second file that separates out the
application-specific message codes from those used by the core.
Adjust includes accordingly. No functional change.
* The idea is to move the callback based mechanism into a derived
class. The objects can be composed to create working systems.
* The BMediaClient class supply RegisterInput/RegisterOutput
and BeginInput/BeginOutput is moved to BSimpleMediaClient.
* Various minor fixes.
* Capabilities() become Kind()
* Use media_client and media_connection to better model
the different situations of the API. Reduce code duplication
and move media_kit structs/methods into private.
* Various API and beauty improvements.
* Introduce id management for media_connections.
* Fix different issues preventing to correctly begin a connection.
* Those structs are provided as replacement for the classic
media_kit ones. They provide better encapsulation of the data
and the resulting code is heavily simplified. It's planned to
introduce BMediaRoster functions to provide conversion from
media_node and media_input/media_output to media_client
and media_connection.
FunctionInstance:
- Add new state FUNCTION_SOURCE_SUPPRESSED. This signals that the user
explicitly forced disassembly to be loaded despite source code being
available.
LoadSourceCodeJob:
- When forced to disassembly, use the above suppressed state accordingly.
SourceView/TeamWindow/TeamDebugger:
- Adjust to take new state into account as needed.
TeamDebugInfo::GetActiveSourceCode:
- When looking at a function to decide whether to return line information
based on source or disassembly, first examine the source code state. If
the source has never been loaded for that function, but we have it available,
set it on the function at that point. This lazily addresses the fact that
LoadSourceCodeJob is called on behalf of a specific function, and
consequently only sets the source code onto that function, and not all others
present in the same file. This allows us to differentiate between the case
where a function doesn't have source code available at all, versus a function
that has simply been forced to disassembly view at this point in time.
The primary symptom of the above issue was that attempting to set a breakpoint
outside of the currently active function, but within the same file would result
in the breakpoints view indicating that the breakpoint was at line 0 rather
than the appropriate line, and breakpoints would also not be drawn in the
source view for such locations.
Thanks to Humdinger for the heads up!
Chunks may be physically contiguous, but virtually disjoint. Adding
physical addresses may cause ranges to be merged incorrectly.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* The BMediaClient is an higher level API to the media_kit. It
corresponds to what the layout API was for the interface_kit.
The main idea is to allow the developer concentrate only on
higher level details and avoiding handle with the tricky parts
of the media_kit. At the same time the general purpose node that
is implemented inside would allow implementing the best techniques
around thus at the same time reducing code duplication and increasing
efficiency.
* BMediaClient is WIP, this is the initial merge of the branch.
The initial development stone was set long time ago and walked
through various design/implementation phases.
* Ideally we should support this feature by default to allow
future improvements to the plugins management.
* Fixes the major memory corruption that lead to various
crashes on exit in MediaPlayer.
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
* Now pulling in latest amdgpu atombios.h headers
* Lots of DisplayPort cleanup and removal of legacy stuff
* Add obsolete atombios header for things that disappear
(amdgpu doesn't support older cards like we do)
* Introduce new code to support later encoder tables
* Drop radeon-specific encoder service from common dp_info
* Tested on HD 5450 hdmi
* Helps prevent mainboard explosions and other bad stuff.
* ...maybe not explosions, but bad things.
* The RX 480 reference design can pull as much as 90W
from its PCIe slot at load. PCIe is rated for 75W.
* This change overloads the PCIe power cables vs the PCIe
slot. The PCIe power cables can handle going over spec.
* Untested since we really can't come close to loading a
RX 480 without hardware OpenGL ^_^
* Should be able to test on real hardware within a week.
- Add new interface TeamFunctionSourceInformation. Currently this
exposes a single function allowing one to query for the currently
active source code given a FunctionDebugInfo instance.
- Implement TeamFunctionSourceInformation on TeamDebugInfo.
- Pass TeamFunctionSourceInformation to Dwarf{Team,Image}DebugInfo.
In turn, make use of it in DwarfImageDebugInfo::GetStatement() in
order to determine whether to return the corresponding assembly
or source statement.
With this piece of information, the debugger is now correctly able to
determine that the user is currently looking at disassembly despite debug
info being available, and consequently adjust its stepping behavior based on
that. Previously, the source code statement was always used, leading to it
not being possible to single step assembly lines in such a circumstance
without manually using run to cursor.
Other related cleanups:
- TeamDebugInfo now inherits BReferenceable directly, rather than relying on
indirectly inheriting it from TeamTypeInformation.
- Remove BReferenceable from TeamTypeInformation. The latter is only an
interface anyways, and inheriting that base class from multiple locations
was causing GCC5 trouble when resolving BReference<TeamDebugInfo>, even
when virtual inheritance was used.
The HashMap constructor was called before the heap is initialized,
ending up calling malloc from the OpenHashMap constructor.
Oddly it was still working on x86 but broke other platforms.
Instead we add a Lookup() static method to Partition,
which by default walks gPartitions for the id,
and recursively calls itself on the children lists.
This means we must add a partition even temporarily to gPartitions
before Scan()ing it though.
Signed-off-by: François Revol <revol@free.fr>
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
There was some mixup with the interrupt registers, still:
- The driver uses 16-bit read/write, but on SandyBridge the register is
32 bits
- There is a global interrupt enable bit, which must be set to unmask
everything else
- The bits for vblank interrupt are not the same on SNB and later PCH
based devices, and the code mixed the two.
Move the computation of the interrupt bits to an helper function, and
use it everywhere to make sure we always use the right bits.
Modesetting
===========
My previous hack was setting the transcoder registers, instead of the
display ones. Do that the way it is designed in the driver instead:
- If there is a transcoder, set its registers, but do not set the
display timings. The display will remain set at its native (and only)
resolution, and panel fitting will adjust the output of the transcoder
to match.
- If there is no transcoder, set the display registers directly to the
native resolution, as it was done on previous generation devices.
- fPipeOffset hacks no longer needed
DPMS
====
It seems the panel control register is not readable on PCH? Anyway, the
code would loop forever waiting for the bit to become unset when turning
the display off. Waiting seems to not be needed, so just remove it as
well as the "unlock" bit, which does not work for me and results in a
black screen.
Remaining hacks
===============
I still need to force HEAD_MODE_A_ANALOG to get output on pipe B (LVDS
display) working. I suspect something is common to the two pipes or not
allocated to the right one.
This version will have less side effects on other generations and help
with getting things to work on SandyBridge and possibly later devices.
Please test and report.
