haiku/headers/private/kernel/user_debugger.h

277 lines
8.5 KiB
C
Raw Normal View History

/*
* Copyright 2005-2011, Ingo Weinhold, ingo_weinhold@gmx.de.
* Distributed under the terms of the MIT License.
*
* Userland debugger support.
*/
#ifndef _KERNEL_USER_DEBUGGER_H
#define _KERNEL_USER_DEBUGGER_H
#include <debugger.h>
#include <arch/user_debugger.h>
#include <timer.h>
// limits
#define B_DEBUG_MIN_PROFILE_INTERVAL 10 /* in us */
#define B_DEBUG_STACK_TRACE_DEPTH 128
#define B_DEBUG_PROFILE_BUFFER_FLUSH_THRESHOLD 70 /* in % */
struct BreakpointManager;
struct ConditionVariable;
struct function_profile_info;
namespace BKernel {
struct Thread;
}
using BKernel::Thread;
// Team related debugging data.
//
// Locking policy:
// 1) When accessing the structure it must be made sure, that the structure,
// (i.e. the struct team it lives in) isn't deleted. Thus one either needs to
// acquire the global team lock, or one accesses the structure from a thread
// of that team.
// 2) Access to the `flags' field is atomic. Reading via atomic_get()
// requires no further locks (in addition to 1) that is). Writing requires
// `lock' being held and must be done atomically, too
// (atomic_{set,and,or}()). Reading with `lock' being held doesn't need to
// be done atomically.
// 3) Access to all other fields (read or write) requires `lock' being held.
//
struct team_debug_info {
spinlock lock;
// Guards the remaining fields. Should always be the innermost lock
// to be acquired/released.
int32 flags;
// Set atomically. So reading atomically is OK, even when the team
// lock is not held (at least if it is certain, that the team struct
// won't go).
team_id debugger_team;
port_id debugger_port;
thread_id nub_thread;
port_id nub_port;
// the port the nub thread is waiting on for commands from the debugger
sem_id debugger_write_lock;
// synchronizes writes to the debugger port with the setting (but not
// clearing) of the B_TEAM_DEBUG_DEBUGGER_HANDOVER flag
thread_id causing_thread;
// thread that caused the debugger to be attached; -1 for manual
// debugger attachment (or no debugger installed)
vint32 image_event;
// counter incremented whenever an image is created/deleted
struct ConditionVariable* debugger_changed_condition;
// Set whenever someone is going (or planning) to change the debugger.
// If one wants to do the same, one has to wait for this condition.
// Both threads lock (outer) and team debug info lock (inner) have to
// be held when accessing this field. After setting to a condition
// variable the thread won't be deleted (until unsetting it) -- it might
// be removed from the team hash table, though.
struct BreakpointManager* breakpoint_manager;
// manages hard- and software breakpoints
struct arch_team_debug_info arch_info;
};
struct thread_debug_info {
int32 flags;
// Set atomically. So reading atomically is OK, even when the thread
// lock is not held (at least if it is certain, that the thread struct
// won't go).
port_id debug_port;
// the port the thread is waiting on for commands from the nub thread
sigset_t ignore_signals;
// the signals the debugger is not interested in
sigset_t ignore_signals_once;
// the signals the debugger wishes not to be notified of, when they
// occur the next time
// profiling related part; if samples != NULL, the thread is profiled
struct {
bigtime_t interval;
// sampling interval
area_id sample_area;
// cloned sample buffer area
addr_t* samples;
// sample buffer
int32 max_samples;
// maximum number of samples the buffer can hold
int32 flush_threshold;
// number of sample when the buffer is flushed (if possible)
int32 sample_count;
// number of samples the buffer currently holds
int32 stack_depth;
// number of return addresses to record per timer interval
int32 dropped_ticks;
// number of ticks that had to be dropped when the sample buffer was
// full and couldn't be flushed
int32 image_event;
// number of the image event when the first sample was written into
// the buffer
int32 last_image_event;
// number of the image event when the last sample was written into
// the buffer
bool variable_stack_depth;
// record a variable number of samples per hit
bool buffer_full;
// indicates that the sample buffer is full
union {
bigtime_t interval_left;
// when unscheduled: the time left of the current sampling
// interval
bigtime_t timer_end;
// when running: the absolute time the timer is supposed to go
// off
};
timer* installed_timer;
// when running and being profiled: the CPU's profiling timer
} profile;
struct arch_thread_debug_info arch_info;
};
#define GRAB_TEAM_DEBUG_INFO_LOCK(info) acquire_spinlock(&(info).lock)
#define RELEASE_TEAM_DEBUG_INFO_LOCK(info) release_spinlock(&(info).lock)
// team debugging flags (user-specifiable flags are in <debugger.h>)
enum {
B_TEAM_DEBUG_DEBUGGER_INSTALLED = 0x0001,
B_TEAM_DEBUG_DEBUGGER_HANDOVER = 0x0002, // marked for hand-over
B_TEAM_DEBUG_DEBUGGER_HANDING_OVER = 0x0004, // handing over
B_TEAM_DEBUG_DEBUGGER_DISABLED = 0x0008,
B_TEAM_DEBUG_KERNEL_FLAG_MASK = 0xffff,
B_TEAM_DEBUG_DEFAULT_FLAGS = 0,
B_TEAM_DEBUG_INHERITED_FLAGS = B_TEAM_DEBUG_DEBUGGER_DISABLED
};
// thread debugging flags (user-specifiable flags are in <debugger.h>)
enum {
B_THREAD_DEBUG_INITIALIZED = 0x0001,
B_THREAD_DEBUG_DYING = 0x0002,
B_THREAD_DEBUG_STOP = 0x0004,
B_THREAD_DEBUG_STOPPED = 0x0008,
B_THREAD_DEBUG_SINGLE_STEP = 0x0010,
B_THREAD_DEBUG_NOTIFY_SINGLE_STEP = 0x0020,
B_THREAD_DEBUG_NUB_THREAD = 0x0040, // marks the nub thread
B_THREAD_DEBUG_KERNEL_FLAG_MASK = 0xffff,
B_THREAD_DEBUG_DEFAULT_FLAGS = 0,
};
// messages sent from the debug nub thread to a debugged thread
typedef enum {
B_DEBUGGED_THREAD_MESSAGE_CONTINUE = 0,
B_DEBUGGED_THREAD_SET_CPU_STATE,
B_DEBUGGED_THREAD_GET_CPU_STATE,
B_DEBUGGED_THREAD_DEBUGGER_CHANGED,
} debugged_thread_message;
typedef struct {
uint32 handle_event;
bool single_step;
} debugged_thread_continue;
typedef struct {
port_id reply_port;
} debugged_thread_get_cpu_state;
typedef struct {
debug_cpu_state cpu_state;
} debugged_thread_set_cpu_state;
typedef union {
debugged_thread_continue continue_thread;
debugged_thread_set_cpu_state set_cpu_state;
debugged_thread_get_cpu_state get_cpu_state;
} debugged_thread_message_data;
// internal messages sent to the nub thread
typedef enum {
B_DEBUG_MESSAGE_HANDED_OVER = -1,
} debug_nub_kernel_message;
#ifdef __cplusplus
extern "C" {
#endif
// service calls
void clear_team_debug_info(struct team_debug_info *info, bool initLock);
void init_thread_debug_info(struct thread_debug_info *info);
void clear_thread_debug_info(struct thread_debug_info *info, bool dying);
void destroy_thread_debug_info(struct thread_debug_info *info);
void user_debug_prepare_for_exec();
void user_debug_finish_after_exec();
void init_user_debug();
Merged branch haiku/branches/developer/bonefish/optimization revision 23139 into trunk, with roughly the following changes (for details svn log the branch): * The int 99 syscall handler is now fully in assembly. * Added a sysenter/sysexit handler and use it on Pentiums that support it (via commpage). * Got rid of i386_handle_trap(). A bit of functionality was moved into the assembly handler which now uses a jump table to call C functions handling the respective interrupt. * Some optimizations to get user debugger support code out of the interrupt handling path. * Introduced a thread::flags fields which allows to skip handling of rare events (signals, user debug enabling/disabling) on the common interrupt handling path. * Got rid of the explicit iframe stack. The iframes can still be retrieved by iterating through the stack frames. * Made the commpage an architecture independent feature. It's used for the real time data stuff (instead of creating a separate area). * The x86 CPU modules can now provide processor optimized versions for common functions (currently memcpy() only). They are used in the kernel and are provided to the userland via commpage entries. * Introduced build system feature allowing easy use of C structure member offsets in assembly code. Changes after merging: * Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp (caused by refactoring and introduction of "call" debugger command). git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
2008-01-11 03:36:44 +03:00
// debug event callbacks
void user_debug_pre_syscall(uint32 syscall, void *args);
void user_debug_post_syscall(uint32 syscall, void *args, uint64 returnValue,
bigtime_t startTime);
bool user_debug_exception_occurred(debug_exception_type exception, int signal);
bool user_debug_handle_signal(int signal, struct sigaction *handler,
bool deadly);
void user_debug_stop_thread();
void user_debug_team_created(team_id teamID);
void user_debug_team_deleted(team_id teamID, port_id debuggerPort);
void user_debug_team_exec();
Merged branch haiku/branches/developer/bonefish/optimization revision 23139 into trunk, with roughly the following changes (for details svn log the branch): * The int 99 syscall handler is now fully in assembly. * Added a sysenter/sysexit handler and use it on Pentiums that support it (via commpage). * Got rid of i386_handle_trap(). A bit of functionality was moved into the assembly handler which now uses a jump table to call C functions handling the respective interrupt. * Some optimizations to get user debugger support code out of the interrupt handling path. * Introduced a thread::flags fields which allows to skip handling of rare events (signals, user debug enabling/disabling) on the common interrupt handling path. * Got rid of the explicit iframe stack. The iframes can still be retrieved by iterating through the stack frames. * Made the commpage an architecture independent feature. It's used for the real time data stuff (instead of creating a separate area). * The x86 CPU modules can now provide processor optimized versions for common functions (currently memcpy() only). They are used in the kernel and are provided to the userland via commpage entries. * Introduced build system feature allowing easy use of C structure member offsets in assembly code. Changes after merging: * Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp (caused by refactoring and introduction of "call" debugger command). git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
2008-01-11 03:36:44 +03:00
void user_debug_update_new_thread_flags(thread_id threadID);
void user_debug_thread_created(thread_id threadID);
void user_debug_thread_deleted(team_id teamID, thread_id threadID);
void user_debug_thread_exiting(Thread* thread);
void user_debug_image_created(const image_info *imageInfo);
void user_debug_image_deleted(const image_info *imageInfo);
void user_debug_breakpoint_hit(bool software);
void user_debug_watchpoint_hit();
void user_debug_single_stepped();
void user_debug_thread_unscheduled(Thread* thread);
void user_debug_thread_scheduled(Thread* thread);
// syscalls
void _user_debugger(const char *message);
int _user_disable_debugger(int state);
status_t _user_install_default_debugger(port_id debuggerPort);
port_id _user_install_team_debugger(team_id team, port_id debuggerPort);
status_t _user_remove_team_debugger(team_id team);
status_t _user_debug_thread(thread_id thread);
void _user_wait_for_debugger(void);
status_t _user_set_debugger_breakpoint(void *address, uint32 type,
int32 length, bool watchpoint);
status_t _user_clear_debugger_breakpoint(void *address, bool watchpoint);
#ifdef __cplusplus
} // extern "C"
#endif
#endif // _KERNEL_USER_DEBUGGER_H