Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/amiga/dev
History
veego c9252fa879 First version of the CyberVision 3D driver. This driver is based on 
the CyberVision64 driver. Modified by Tobias Abt with some bugfixes
from Bernd Ernesti.
ZorroII is at the moment not supported and there is a small problem
with the Console driver where you just get a black screen, but the
system boots and you can use X11 without a problem.
 		1997-10-19 18:55:21 +00:00
..
a2kbbc.c Fix a complaint by Eric Delcamp on port-amiga... looks like Thorsten Fruehauf 1997-07-23 10:19:42 +00:00
a34kbbc.c Make Amiga battery clocks autoconfiguration devices, so that they can be 1997-07-19 00:01:40 +00:00
afsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
ahsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
ahscreg.h
…
atzsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
atzscreg.h
…
aucc.c Make the audio API (almost) SunOS compatible. 1997-10-19 07:41:33 +00:00
auccvar.h Multichannel output still doesn't work, but while working on it, I repaired 1997-07-04 21:00:15 +00:00
bzivsc.c Add separate driver frontend for the Blizzard-IV; the differences with 1997-10-10 04:53:32 +00:00
bzivscvar.h Add separate driver frontend for the Blizzard-IV; the differences with 1997-10-10 04:53:32 +00:00
bzsc.c Oops, wrong file was committed. Get the right one this time. 1997-10-12 19:32:12 +00:00
bzscvar.h Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
bztzsc.c Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
bztzscvar.h Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
cbiisc.c Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
cbiiscvar.h Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
cbsc.c Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
cbscvar.h Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
clock.c Only create verbose delay loop calibration message for DIAGNOSTIC kernels. 1997-09-15 22:17:55 +00:00
clockioctl.h
…
com_supio.c Adjust for new home of "com" driver. 1997-10-16 01:06:37 +00:00
device.h
…
dmavar.h
…
drbbc.c Make the DraCo hardware clock an autoconfiguration device. 1997-07-17 23:29:28 +00:00
drsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
drsupio.c First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs 1997-09-27 22:44:11 +00:00
empsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
event.c Changes for poll(2). 1996-10-11 21:12:43 +00:00
event_var.h Changes for poll(2). 1996-10-11 21:12:43 +00:00
fd.c Fix typo from DIOCGDEFLABEL implementation. 1997-10-11 16:13:19 +00:00
flsc.c Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
flscvar.h Replace Fastlane and Blizzard SCSI driver frontends, using the machine 1997-10-04 04:01:17 +00:00
genpar.c
…
grf.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
grf_cc.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
grf_ccreg.h
…
grf_cl.c - increase the number of possible grfmodes from 8 to 24 1997-07-29 17:46:24 +00:00
grf_clreg.h Add a missing test for the PicassoIV, which fix the colour problem. 1997-03-21 09:40:58 +00:00
grf_cv.c Fix the doublescan mode which was broken in the last commit. 1997-07-30 11:05:55 +00:00
grf_cv3d.c First version of the CyberVision 3D driver. This driver is based on 1997-10-19 18:55:21 +00:00
grf_cv3dreg.h First version of the CyberVision 3D driver. This driver is based on 1997-10-19 18:55:21 +00:00
grf_cvreg.h s/inline/__inline/ 1997-07-29 17:42:03 +00:00
grf_et.c - increase the number of possible grfmodes from 8 to 24 1997-07-29 17:46:24 +00:00
grf_etreg.h s/inline/__inline/ 1997-07-29 17:42:03 +00:00
grf_rh.c - Change the check in r[ht]_getvmode for md->DEP == 4 to md->DEP != 4. 1997-07-29 17:52:05 +00:00
grf_rhreg.h s/inline/__inline/ 1997-07-29 17:42:03 +00:00
grf_rt.c - Change the check in r[ht]_getvmode for md->DEP == 4 to md->DEP != 4. 1997-07-29 17:52:05 +00:00
grf_rtreg.h s/inline/__inline/ 1997-07-29 17:42:03 +00:00
grf_ul.c - changes for the grfconfig interface (provided by Ignatios Souvatzis): 1997-07-29 17:50:01 +00:00
grf_ulreg.h Cleaned up copyright notice, fixed a typo, and sync the comment in the 1996-07-08 13:28:41 +00:00
grf_ultms.g Cleaned up copyright notice, fixed a typo, and sync the comment in the 1996-07-08 13:28:41 +00:00
grfabs.c
…
grfabs_cc.c Add an 800x600 Super72 mode; started by Neil Clark and finished by me. 1997-09-19 03:27:10 +00:00
grfabs_ccglb.c
…
grfabs_ccreg.h Add an 800x600 Super72 mode; started by Neil Clark and finished by me. 1997-09-19 03:27:10 +00:00
grfabs_reg.h
…
grfioctl.h - Remove grfvideo_mode->hblank_stop and grfvideo_mode->vblank_stop. 1997-07-29 17:54:11 +00:00
grfvar.h
…
gtsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
gtscreg.h
…
gvpbus.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
gvpbusvar.h
…
hyper.c Driver for the VMC HyperCom3/zbus and the VMC HyperCom4. 1997-10-18 23:31:32 +00:00
idesc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
if_bah.c Actually ask for ARP initialization on this interface. 1997-04-04 06:27:32 +00:00
if_bahreg.h
…
if_ed.c Make this compile again on Amiga. Fix by Bernd Ernesti. 1997-03-17 17:51:41 +00:00
if_edreg.h
…
if_es.c if_es.c 1997-03-17 17:55:54 +00:00
if_esreg.h
…
if_le.c Copyright assigned to The NetBSD Foundation. 1997-10-04 09:38:47 +00:00
if_levar.h if_le supports now the Ariadne card. 1997-03-27 21:15:11 +00:00
if_qn.c Make this compile again. 1997-03-17 18:04:40 +00:00
if_qnreg.h
…
ite.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
ite_cc.c
…
ite_cl.c
…
ite_cv.c
…
ite_cv3d.c First version of the CyberVision 3D driver. This driver is based on 1997-10-19 18:55:21 +00:00
ite_et.c - Merlin works now in ZorroIII mode 1997-03-05 22:50:38 +00:00
ite_rh.c
…
ite_rt.c
…
ite_ul.c backout previous kprintf change 1996-10-13 03:05:43 +00:00
iteioctl.h
…
itevar.h
…
ivsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
kbd.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
kbdmap.c Add missing keypad entry for '+' and correct a comment. From pr#3893. 1997-09-06 12:41:10 +00:00
kbdmap.h
…
kbdreg.h
…
kf_8x8.c
…
kf_8x11.c
…
lpt_supio.c First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs 1997-09-27 22:44:11 +00:00
melody.c TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. 1997-10-16 23:58:10 +00:00
mfc.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
mgnsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
mlhsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
ms.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
msc.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
msc6502.h New version by Jukka Marin <jmarin@pyy.jmp.fi>, with rewritten (to fix 1996-12-09 17:24:55 +00:00
mscreg.h New version by Jukka Marin <jmarin@pyy.jmp.fi>, with rewritten (to fix 1996-12-09 17:24:55 +00:00
otgsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
par.c Get rid of __BROKEN_INDIRECT_CONFIG. 1996-12-23 09:09:49 +00:00
parioctl.h
…
rtc.h Make the DraCo hardware clock an autoconfiguration device. 1997-07-17 23:29:28 +00:00
rtmondefs.c
…
rtmons
…
sbic.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
sbicreg.h
…
sbicvar.h Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
sci.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
scireg.h
…
scivar.h Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
ser.c Use a global variable to hold the current speed of the internal serial port. 1997-10-04 03:59:36 +00:00
serreg.h
…
siop.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
siop_script.out
…
siop_script.ss
…
siopreg.h
…
siopvar.h Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
supio.h Support for the upcoming NetBSD/Amiga Hypercom driver family: 1997-09-16 20:34:23 +00:00
view.c backout previous kprintf change 1996-10-13 03:05:43 +00:00
viewioctl.h
…
viewvar.h
…
vuid_event.h
…
wesc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
wstsc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00
zbus.c A few more boards. This really should be split into a seperate file, only 1997-09-15 21:37:35 +00:00
zbusvar.h
…
zssc.c Merge scsipi branch in the mainline. This add support for ATAPI devices 1997-08-27 11:22:52 +00:00