Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d53dd8a3f3
NetBSD/sys/dev/ata/ata_wdc.c
thorpej 527d62e0a2 - When starting an ATA or ATAPI transfer, handle the case where (*dma_init)() 
returns EINVAL, indicating that DMA cannot be done for this transfer.
  Fall back to PIO in this case.
- Add a geodeide_dma_init() routine that checks to make sure that transfers
  start on a 16 byte boundary, returning EINVAL if not.  Works around a chip
  bug that causes a hard system hang.

Problem reported and patch tested by Erik Fair.
2005-07-06 01:46:52 +00:00

779 lines
24 KiB
C
Raw Blame History

/* $NetBSD: ata_wdc.c,v 1.82 2005/07/06 01:46:52 thorpej Exp $ */
/*
* Copyright (c) 1998, 2001, 2003 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Manuel Bouyer.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ata_wdc.c,v 1.82 2005/07/06 01:46:52 thorpej Exp $");
#ifndef ATADEBUG
#define ATADEBUG
#endif /* ATADEBUG */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/file.h>
#include <sys/stat.h>
#include <sys/buf.h>
#include <sys/bufq.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/disklabel.h>
#include <sys/syslog.h>
#include <sys/proc.h>
#include <machine/intr.h>
#include <machine/bus.h>
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
#define bus_space_write_multi_stream_2 bus_space_write_multi_2
#define bus_space_write_multi_stream_4 bus_space_write_multi_4
#define bus_space_read_multi_stream_2 bus_space_read_multi_2
#define bus_space_read_multi_stream_4 bus_space_read_multi_4
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */
#include <dev/ata/atareg.h>
#include <dev/ata/atavar.h>
#include <dev/ic/wdcreg.h>
#include <dev/ic/wdcvar.h>
#define DEBUG_INTR 0x01
#define DEBUG_XFERS 0x02
#define DEBUG_STATUS 0x04
#define DEBUG_FUNCS 0x08
#define DEBUG_PROBE 0x10
#ifdef ATADEBUG
extern int wdcdebug_wd_mask; /* inited in wd.c */
#define ATADEBUG_PRINT(args, level) \
if (wdcdebug_wd_mask & (level)) \
printf args
#else
#define ATADEBUG_PRINT(args, level)
#endif
#define ATA_DELAY 10000 /* 10s for a drive I/O */
static int wdc_ata_bio(struct ata_drive_datas*, struct ata_bio*);
static void wdc_ata_bio_start(struct ata_channel *,struct ata_xfer *);
static void _wdc_ata_bio_start(struct ata_channel *,struct ata_xfer *);
static int wdc_ata_bio_intr(struct ata_channel *, struct ata_xfer *,
int);
static void wdc_ata_bio_kill_xfer(struct ata_channel *,
struct ata_xfer *, int);
static void wdc_ata_bio_done(struct ata_channel *, struct ata_xfer *);
static int wdc_ata_err(struct ata_drive_datas *, struct ata_bio *);
#define WDC_ATA_NOERR 0x00 /* Drive doesn't report an error */
#define WDC_ATA_RECOV 0x01 /* There was a recovered error */
#define WDC_ATA_ERR 0x02 /* Drive reports an error */
static int wdc_ata_addref(struct ata_drive_datas *);
static void wdc_ata_delref(struct ata_drive_datas *);
const struct ata_bustype wdc_ata_bustype = {
SCSIPI_BUSTYPE_ATA,
wdc_ata_bio,
wdc_reset_drive,
wdc_reset_channel,
wdc_exec_command,
ata_get_params,
wdc_ata_addref,
wdc_ata_delref,
ata_kill_pending,
};
/*
* Handle block I/O operation. Return ATACMD_COMPLETE, ATACMD_QUEUED, or
* ATACMD_TRY_AGAIN. Must be called at splbio().
*/
static int
wdc_ata_bio(struct ata_drive_datas *drvp, struct ata_bio *ata_bio)
{
struct ata_xfer *xfer;
struct ata_channel *chp = drvp->chnl_softc;
struct atac_softc *atac = chp->ch_atac;
xfer = ata_get_xfer(ATAXF_NOSLEEP);
if (xfer == NULL)
return ATACMD_TRY_AGAIN;
if (atac->atac_cap & ATAC_CAP_NOIRQ)
ata_bio->flags |= ATA_POLL;
if (ata_bio->flags & ATA_POLL)
xfer->c_flags |= C_POLL;
if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
(ata_bio->flags & ATA_SINGLE) == 0)
xfer->c_flags |= C_DMA;
xfer->c_drive = drvp->drive;
xfer->c_cmd = ata_bio;
xfer->c_databuf = ata_bio->databuf;
xfer->c_bcount = ata_bio->bcount;
xfer->c_start = wdc_ata_bio_start;
xfer->c_intr = wdc_ata_bio_intr;
xfer->c_kill_xfer = wdc_ata_bio_kill_xfer;
ata_exec_xfer(chp, xfer);
return (ata_bio->flags & ATA_ITSDONE) ? ATACMD_COMPLETE : ATACMD_QUEUED;
}
static void
wdc_ata_bio_start(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct atac_softc *atac = chp->ch_atac;
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
struct ata_bio *ata_bio = xfer->c_cmd;
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
const char *errstring;
ATADEBUG_PRINT(("wdc_ata_bio_start %s:%d:%d\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive),
DEBUG_XFERS);
/* Do control operations specially. */
if (__predict_false(drvp->state < READY)) {
/*
* Actually, we want to be careful not to mess with the control
* state if the device is currently busy, but we can assume
* that we never get to this point if that's the case.
*/
/* If it's not a polled command, we need the kernel thread */
if ((xfer->c_flags & C_POLL) == 0 &&
(chp->ch_flags & ATACH_TH_RUN) == 0) {
chp->ch_queue->queue_freeze++;
wakeup(&chp->ch_thread);
return;
}
/*
* disable interrupts, all commands here should be quick
* enouth to be able to poll, and we don't go here that often
*/
bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
WDCTL_4BIT | WDCTL_IDS);
if (wdc->select)
wdc->select(chp, xfer->c_drive);
bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
WDSD_IBM | (xfer->c_drive << 4));
DELAY(10);
errstring = "wait";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
wdccommandshort(chp, xfer->c_drive, WDCC_RECAL);
/* Wait for at last 400ns for status bit to be valid */
DELAY(1);
errstring = "recal";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
goto ctrlerror;
/* Don't try to set modes if controller can't be adjusted */
if (atac->atac_set_modes == NULL)
goto geometry;
/* Also don't try if the drive didn't report its mode */
if ((drvp->drive_flags & DRIVE_MODE) == 0)
goto geometry;
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
0x08 | drvp->PIO_mode, WDSF_SET_MODE);
errstring = "piomode";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
goto ctrlerror;
if (drvp->drive_flags & DRIVE_UDMA) {
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
} else if (drvp->drive_flags & DRIVE_DMA) {
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
0x20 | drvp->DMA_mode, WDSF_SET_MODE);
} else {
goto geometry;
}
errstring = "dmamode";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
goto ctrlerror;
geometry:
if (ata_bio->flags & ATA_LBA)
goto multimode;
wdccommand(chp, xfer->c_drive, WDCC_IDP,
ata_bio->lp->d_ncylinders,
ata_bio->lp->d_ntracks - 1, 0, ata_bio->lp->d_nsectors,
(ata_bio->lp->d_type == DTYPE_ST506) ?
ata_bio->lp->d_precompcyl / 4 : 0);
errstring = "geometry";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
goto ctrlerror;
multimode:
if (ata_bio->multi == 1)
goto ready;
wdccommand(chp, xfer->c_drive, WDCC_SETMULTI, 0, 0, 0,
ata_bio->multi, 0);
errstring = "setmulti";
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, wait_flags))
goto ctrltimeout;
if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
goto ctrlerror;
ready:
drvp->state = READY;
/*
* The drive is usable now
*/
bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
WDCTL_4BIT);
delay(10); /* some drives need a little delay here */
}
_wdc_ata_bio_start(chp, xfer);
return;
ctrltimeout:
printf("%s:%d:%d: %s timed out\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
errstring);
ata_bio->error = TIMEOUT;
goto ctrldone;
ctrlerror:
printf("%s:%d:%d: %s ",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
errstring);
if (chp->ch_status & WDCS_DWF) {
printf("drive fault\n");
ata_bio->error = ERR_DF;
} else {
printf("error (%x)\n", chp->ch_error);
ata_bio->r_error = chp->ch_error;
ata_bio->error = ERROR;
}
ctrldone:
drvp->state = 0;
wdc_ata_bio_done(chp, xfer);
bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr, WDCTL_4BIT);
return;
}
static void
_wdc_ata_bio_start(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct atac_softc *atac = chp->ch_atac;
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
struct ata_bio *ata_bio = xfer->c_cmd;
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
u_int16_t cyl;
u_int8_t head, sect, cmd = 0;
int nblks, error;
int dma_flags = 0;
ATADEBUG_PRINT(("_wdc_ata_bio_start %s:%d:%d\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive),
DEBUG_INTR | DEBUG_XFERS);
if (xfer->c_flags & C_DMA) {
if (drvp->n_xfers <= NXFER)
drvp->n_xfers++;
dma_flags = (ata_bio->flags & ATA_READ) ? WDC_DMA_READ : 0;
if (ata_bio->flags & ATA_LBA48)
dma_flags |= WDC_DMA_LBA48;
}
again:
/*
*
* When starting a multi-sector transfer, or doing single-sector
* transfers...
*/
if (xfer->c_skip == 0 || (ata_bio->flags & ATA_SINGLE) != 0) {
if (ata_bio->flags & ATA_SINGLE)
nblks = 1;
else
nblks = xfer->c_bcount / ata_bio->lp->d_secsize;
/* Check for bad sectors and adjust transfer, if necessary. */
if ((ata_bio->lp->d_flags & D_BADSECT) != 0) {
long blkdiff;
int i;
for (i = 0; (blkdiff = ata_bio->badsect[i]) != -1;
i++) {
blkdiff -= ata_bio->blkno;
if (blkdiff < 0)
continue;
if (blkdiff == 0) {
/* Replace current block of transfer. */
ata_bio->blkno =
ata_bio->lp->d_secperunit -
ata_bio->lp->d_nsectors - i - 1;
}
if (blkdiff < nblks) {
/* Bad block inside transfer. */
ata_bio->flags |= ATA_SINGLE;
nblks = 1;
}
break;
}
/* Transfer is okay now. */
}
if (ata_bio->flags & ATA_LBA48) {
sect = 0;
cyl = 0;
head = 0;
} else if (ata_bio->flags & ATA_LBA) {
sect = (ata_bio->blkno >> 0) & 0xff;
cyl = (ata_bio->blkno >> 8) & 0xffff;
head = (ata_bio->blkno >> 24) & 0x0f;
head |= WDSD_LBA;
} else {
int blkno = ata_bio->blkno;
sect = blkno % ata_bio->lp->d_nsectors;
sect++; /* Sectors begin with 1, not 0. */
blkno /= ata_bio->lp->d_nsectors;
head = blkno % ata_bio->lp->d_ntracks;
blkno /= ata_bio->lp->d_ntracks;
cyl = blkno;
head |= WDSD_CHS;
}
if (xfer->c_flags & C_DMA) {
ata_bio->nblks = nblks;
ata_bio->nbytes = xfer->c_bcount;
cmd = (ata_bio->flags & ATA_READ) ?
WDCC_READDMA : WDCC_WRITEDMA;
/* Init the DMA channel. */
error = (*wdc->dma_init)(wdc->dma_arg,
chp->ch_channel, xfer->c_drive,
(char *)xfer->c_databuf + xfer->c_skip,
ata_bio->nbytes, dma_flags);
if (error) {
if (error == EINVAL) {
/*
* We can't do DMA on this transfer
* for some reason. Fall back to
* PIO.
*/
xfer->c_flags &= ~C_DMA;
error = 0;
goto do_pio;
}
ata_bio->error = ERR_DMA;
ata_bio->r_error = 0;
wdc_ata_bio_done(chp, xfer);
return;
}
/* Initiate command */
if (wdc->select)
wdc->select(chp, xfer->c_drive);
bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
0, WDSD_IBM | (xfer->c_drive << 4));
switch(wdc_wait_for_ready(chp, ATA_DELAY, wait_flags)) {
case WDCWAIT_OK:
break;
case WDCWAIT_TOUT:
goto timeout;
case WDCWAIT_THR:
return;
}
if (ata_bio->flags & ATA_LBA48) {
wdccommandext(chp, xfer->c_drive, atacmd_to48(cmd),
(u_int64_t)ata_bio->blkno, nblks);
} else {
wdccommand(chp, xfer->c_drive, cmd, cyl,
head, sect, nblks, 0);
}
/* start the DMA channel */
(*wdc->dma_start)(wdc->dma_arg,
chp->ch_channel, xfer->c_drive);
chp->ch_flags |= ATACH_DMA_WAIT;
/* start timeout machinery */
if ((xfer->c_flags & C_POLL) == 0)
callout_reset(&chp->ch_callout,
ATA_DELAY / 1000 * hz, wdctimeout, chp);
/* wait for irq */
goto intr;
} /* else not DMA */
do_pio:
ata_bio->nblks = min(nblks, ata_bio->multi);
ata_bio->nbytes = ata_bio->nblks * ata_bio->lp->d_secsize;
KASSERT(nblks == 1 || (ata_bio->flags & ATA_SINGLE) == 0);
if (ata_bio->nblks > 1) {
cmd = (ata_bio->flags & ATA_READ) ?
WDCC_READMULTI : WDCC_WRITEMULTI;
} else {
cmd = (ata_bio->flags & ATA_READ) ?
WDCC_READ : WDCC_WRITE;
}
/* Initiate command! */
if (wdc->select)
wdc->select(chp, xfer->c_drive);
bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
WDSD_IBM | (xfer->c_drive << 4));
switch(wdc_wait_for_ready(chp, ATA_DELAY, wait_flags)) {
case WDCWAIT_OK:
break;
case WDCWAIT_TOUT:
goto timeout;
case WDCWAIT_THR:
return;
}
if (ata_bio->flags & ATA_LBA48) {
wdccommandext(chp, xfer->c_drive, atacmd_to48(cmd),
(u_int64_t) ata_bio->blkno, nblks);
} else {
wdccommand(chp, xfer->c_drive, cmd, cyl,
head, sect, nblks,
(ata_bio->lp->d_type == DTYPE_ST506) ?
ata_bio->lp->d_precompcyl / 4 : 0);
}
/* start timeout machinery */
if ((xfer->c_flags & C_POLL) == 0)
callout_reset(&chp->ch_callout,
ATA_DELAY / 1000 * hz, wdctimeout, chp);
} else if (ata_bio->nblks > 1) {
/* The number of blocks in the last stretch may be smaller. */
nblks = xfer->c_bcount / ata_bio->lp->d_secsize;
if (ata_bio->nblks > nblks) {
ata_bio->nblks = nblks;
ata_bio->nbytes = xfer->c_bcount;
}
}
/* If this was a write and not using DMA, push the data. */
if ((ata_bio->flags & ATA_READ) == 0) {
/*
* we have to busy-wait here, we can't rely on running in
* thread context.
*/
if (wdc_wait_for_drq(chp, ATA_DELAY, AT_POLL) != 0) {
printf("%s:%d:%d: timeout waiting for DRQ, "
"st=0x%02x, err=0x%02x\n",
atac->atac_dev.dv_xname, chp->ch_channel,
xfer->c_drive, chp->ch_status, chp->ch_error);
if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)
ata_bio->error = TIMEOUT;
wdc_ata_bio_done(chp, xfer);
return;
}
if (wdc_ata_err(drvp, ata_bio) == WDC_ATA_ERR) {
wdc_ata_bio_done(chp, xfer);
return;
}
wdc->dataout_pio(chp, drvp->drive_flags,
(char *)xfer->c_databuf + xfer->c_skip, ata_bio->nbytes);
}
intr: /* Wait for IRQ (either real or polled) */
if ((ata_bio->flags & ATA_POLL) == 0) {
chp->ch_flags |= ATACH_IRQ_WAIT;
} else {
/* Wait for at last 400ns for status bit to be valid */
delay(1);
if (chp->ch_flags & ATACH_DMA_WAIT) {
wdc_dmawait(chp, xfer, ATA_DELAY);
chp->ch_flags &= ~ATACH_DMA_WAIT;
}
wdc_ata_bio_intr(chp, xfer, 0);
if ((ata_bio->flags & ATA_ITSDONE) == 0)
goto again;
}
return;
timeout:
printf("%s:%d:%d: not ready, st=0x%02x, err=0x%02x\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
chp->ch_status, chp->ch_error);
if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)
ata_bio->error = TIMEOUT;
wdc_ata_bio_done(chp, xfer);
return;
}
static int
wdc_ata_bio_intr(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
{
struct atac_softc *atac = chp->ch_atac;
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
struct ata_bio *ata_bio = xfer->c_cmd;
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
int drv_err;
ATADEBUG_PRINT(("wdc_ata_bio_intr %s:%d:%d\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive),
DEBUG_INTR | DEBUG_XFERS);
/* Is it not a transfer, but a control operation? */
if (drvp->state < READY) {
printf("%s:%d:%d: bad state %d in wdc_ata_bio_intr\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
drvp->state);
panic("wdc_ata_bio_intr: bad state");
}
/*
* if we missed an interrupt in a PIO transfer, reset and restart.
* Don't try to continue transfer, we may have missed cycles.
*/
if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
ata_bio->error = TIMEOUT;
wdc_ata_bio_done(chp, xfer);
return 1;
}
/* Ack interrupt done by wdc_wait_for_unbusy */
if (wdc_wait_for_unbusy(chp, (irq == 0) ? ATA_DELAY : 0, AT_POLL) < 0) {
if (irq && (xfer->c_flags & C_TIMEOU) == 0)
return 0; /* IRQ was not for us */
printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip%d\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
xfer->c_bcount, xfer->c_skip);
ata_bio->error = TIMEOUT;
wdc_ata_bio_done(chp, xfer);
return 1;
}
if (wdc->irqack)
wdc->irqack(chp);
drv_err = wdc_ata_err(drvp, ata_bio);
/* If we were using DMA, Turn off the DMA channel and check for error */
if (xfer->c_flags & C_DMA) {
if (ata_bio->flags & ATA_POLL) {
/*
* IDE drives deassert WDCS_BSY before transfer is
* complete when using DMA. Polling for DRQ to deassert
* is not enough DRQ is not required to be
* asserted for DMA transfers, so poll for DRDY.
*/
if (wdcwait(chp, WDCS_DRDY | WDCS_DRQ, WDCS_DRDY,
ATA_DELAY, ATA_POLL) == WDCWAIT_TOUT) {
printf("%s:%d:%d: polled transfer timed out "
"(st=0x%x)\n", atac->atac_dev.dv_xname,
chp->ch_channel, xfer->c_drive,
chp->ch_status);
ata_bio->error = TIMEOUT;
drv_err = WDC_ATA_ERR;
}
}
if (wdc->dma_status != 0) {
if (drv_err != WDC_ATA_ERR) {
ata_bio->error = ERR_DMA;
drv_err = WDC_ATA_ERR;
}
}
if (chp->ch_status & WDCS_DRQ) {
if (drv_err != WDC_ATA_ERR) {
printf("%s:%d:%d: intr with DRQ (st=0x%x)\n",
atac->atac_dev.dv_xname, chp->ch_channel,
xfer->c_drive, chp->ch_status);
ata_bio->error = TIMEOUT;
drv_err = WDC_ATA_ERR;
}
}
if (drv_err != WDC_ATA_ERR)
goto end;
if (ata_bio->r_error & WDCE_CRC || ata_bio->error == ERR_DMA)
ata_dmaerr(drvp, (xfer->c_flags & C_POLL) ? AT_POLL : 0);
}
/* if we had an error, end */
if (drv_err == WDC_ATA_ERR) {
wdc_ata_bio_done(chp, xfer);
return 1;
}
/* If this was a read and not using DMA, fetch the data. */
if ((ata_bio->flags & ATA_READ) != 0) {
if ((chp->ch_status & WDCS_DRQ) != WDCS_DRQ) {
printf("%s:%d:%d: read intr before drq\n",
atac->atac_dev.dv_xname, chp->ch_channel,
xfer->c_drive);
ata_bio->error = TIMEOUT;
wdc_ata_bio_done(chp, xfer);
return 1;
}
wdc->datain_pio(chp, drvp->drive_flags,
(char *)xfer->c_databuf + xfer->c_skip, ata_bio->nbytes);
}
end:
ata_bio->blkno += ata_bio->nblks;
ata_bio->blkdone += ata_bio->nblks;
xfer->c_skip += ata_bio->nbytes;
xfer->c_bcount -= ata_bio->nbytes;
/* See if this transfer is complete. */
if (xfer->c_bcount > 0) {
if ((ata_bio->flags & ATA_POLL) == 0) {
/* Start the next operation */
_wdc_ata_bio_start(chp, xfer);
} else {
/* Let _wdc_ata_bio_start do the loop */
return 1;
}
} else { /* Done with this transfer */
ata_bio->error = NOERROR;
wdc_ata_bio_done(chp, xfer);
}
return 1;
}
static void
wdc_ata_bio_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer,
int reason)
{
struct ata_bio *ata_bio = xfer->c_cmd;
int drive = xfer->c_drive;
ata_free_xfer(chp, xfer);
ata_bio->flags |= ATA_ITSDONE;
switch (reason) {
case KILL_GONE:
ata_bio->error = ERR_NODEV;
break;
case KILL_RESET:
ata_bio->error = ERR_RESET;
break;
default:
printf("wdc_ata_bio_kill_xfer: unknown reason %d\n",
reason);
panic("wdc_ata_bio_kill_xfer");
}
ata_bio->r_error = WDCE_ABRT;
ATADEBUG_PRINT(("wdc_ata_done: drv_done\n"), DEBUG_XFERS);
(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc);
}
static void
wdc_ata_bio_done(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct atac_softc *atac = chp->ch_atac;
struct ata_bio *ata_bio = xfer->c_cmd;
int drive = xfer->c_drive;
ATADEBUG_PRINT(("wdc_ata_bio_done %s:%d:%d: flags 0x%x\n",
atac->atac_dev.dv_xname, chp->ch_channel, xfer->c_drive,
(u_int)xfer->c_flags),
DEBUG_XFERS);
callout_stop(&chp->ch_callout);
/* feed back residual bcount to our caller */
ata_bio->bcount = xfer->c_bcount;
/* mark controller inactive and free xfer */
chp->ch_queue->active_xfer = NULL;
ata_free_xfer(chp, xfer);
if (chp->ch_drive[drive].drive_flags & DRIVE_WAITDRAIN) {
ata_bio->error = ERR_NODEV;
chp->ch_drive[drive].drive_flags &= ~DRIVE_WAITDRAIN;
wakeup(&chp->ch_queue->active_xfer);
}
ata_bio->flags |= ATA_ITSDONE;
ATADEBUG_PRINT(("wdc_ata_done: drv_done\n"), DEBUG_XFERS);
(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc);
ATADEBUG_PRINT(("atastart from wdc_ata_done, flags 0x%x\n",
chp->ch_flags), DEBUG_XFERS);
atastart(chp);
}
static int
wdc_ata_err(struct ata_drive_datas *drvp, struct ata_bio *ata_bio)
{
struct ata_channel *chp = drvp->chnl_softc;
ata_bio->error = 0;
if (chp->ch_status & WDCS_BSY) {
ata_bio->error = TIMEOUT;
return WDC_ATA_ERR;
}
if (chp->ch_status & WDCS_DWF) {
ata_bio->error = ERR_DF;
return WDC_ATA_ERR;
}
if (chp->ch_status & WDCS_ERR) {
ata_bio->error = ERROR;
ata_bio->r_error = chp->ch_error;
if (ata_bio->r_error & (WDCE_BBK | WDCE_UNC | WDCE_IDNF |
WDCE_ABRT | WDCE_TK0NF | WDCE_AMNF))
return WDC_ATA_ERR;
return WDC_ATA_NOERR;
}
if (chp->ch_status & WDCS_CORR)
ata_bio->flags |= ATA_CORR;
return WDC_ATA_NOERR;
}
static int
wdc_ata_addref(struct ata_drive_datas *drvp)
{
struct ata_channel *chp = drvp->chnl_softc;
return (ata_addref(chp));
}
static void
wdc_ata_delref(struct ata_drive_datas *drvp)
{
struct ata_channel *chp = drvp->chnl_softc;
ata_delref(chp);
}
Reference in New Issue View Git Blame Copy Permalink