362 lines
13 KiB
C
362 lines
13 KiB
C
/* $NetBSD: wi_ieee.h,v 1.9 2002/01/21 11:28:18 ichiro Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD: src/sys/i386/include/if_wavelan_ieee.h,v 1.4 1999/12/29 04:33:01 peter Exp $
|
|
*/
|
|
|
|
#ifndef _IF_WAVELAN_IEEE_H
|
|
#define _IF_WAVELAN_IEEE_H
|
|
|
|
/*
|
|
* FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the
|
|
* Oslo IETF plenary meeting.
|
|
* The stuff in here should probably go into a generic extension to the
|
|
* ifmedia goop.
|
|
*
|
|
* Michael Graff brought over the encryption bits.
|
|
*/
|
|
|
|
/*
|
|
* This header defines a simple command interface to the FreeBSD
|
|
* WaveLAN/IEEE driver (wi) driver, which is used to set certain
|
|
* device-specific parameters which can't be easily managed through
|
|
* ifconfig(8). No, sysctl(2) is not the answer. I said a _simple_
|
|
* interface, didn't I.
|
|
*/
|
|
|
|
#ifndef SIOCSWAVELAN
|
|
#define SIOCSWAVELAN SIOCSIFGENERIC
|
|
#endif
|
|
|
|
#ifndef SIOCGWAVELAN
|
|
#define SIOCGWAVELAN SIOCGIFGENERIC
|
|
#endif
|
|
|
|
/*
|
|
* Technically I don't think there's a limit to a record
|
|
* length. The largest record is the one that contains the CIS
|
|
* data, which is 240 words long, so 256 should be a safe
|
|
* value.
|
|
*/
|
|
#define WI_MAX_DATALEN 512
|
|
|
|
struct wi_req {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_val[WI_MAX_DATALEN];
|
|
};
|
|
|
|
/*
|
|
* Private LTV records (interpreted only by the driver). This is
|
|
* a minor kludge to allow reading the interface statistics from
|
|
* the driver.
|
|
*/
|
|
#define WI_RID_IFACE_STATS 0x0100
|
|
#define WI_RID_MGMT_XMIT 0x0200
|
|
#ifdef WICACHE
|
|
#define WI_RID_ZERO_CACHE 0x0300
|
|
#define WI_RID_READ_CACHE 0x0400
|
|
#endif
|
|
#define WI_RID_MONITOR_MODE 0x0500
|
|
#define WI_RID_SCAN_APS 0x0600
|
|
#define WI_RID_READ_APS 0x0700
|
|
|
|
struct wi_80211_hdr {
|
|
u_int16_t frame_ctl;
|
|
u_int16_t dur_id;
|
|
u_int8_t addr1[6];
|
|
u_int8_t addr2[6];
|
|
u_int8_t addr3[6];
|
|
u_int16_t seq_ctl;
|
|
u_int8_t addr4[6];
|
|
};
|
|
|
|
#define WI_FCTL_VERS 0x0002
|
|
#define WI_FCTL_FTYPE 0x000C
|
|
#define WI_FCTL_STYPE 0x00F0
|
|
#define WI_FCTL_TODS 0x0100
|
|
#define WI_FCTL_FROMDS 0x0200
|
|
#define WI_FCTL_MOREFRAGS 0x0400
|
|
#define WI_FCTL_RETRY 0x0800
|
|
#define WI_FCTL_PM 0x1000
|
|
#define WI_FCTL_MOREDATA 0x2000
|
|
#define WI_FCTL_WEP 0x4000
|
|
#define WI_FCTL_ORDER 0x8000
|
|
|
|
#define WI_FTYPE_MGMT 0x0000
|
|
#define WI_FTYPE_CTL 0x0004
|
|
#define WI_FTYPE_DATA 0x0008
|
|
|
|
#define WI_STYPE_MGMT_ASREQ 0x0000 /* association request */
|
|
#define WI_STYPE_MGMT_ASRESP 0x0010 /* association response */
|
|
#define WI_STYPE_MGMT_REASREQ 0x0020 /* reassociation request */
|
|
#define WI_STYPE_MGMT_REASRESP 0x0030 /* reassociation response */
|
|
#define WI_STYPE_MGMT_PROBEREQ 0x0040 /* probe request */
|
|
#define WI_STYPE_MGMT_PROBERESP 0x0050 /* probe response */
|
|
#define WI_STYPE_MGMT_BEACON 0x0080 /* beacon */
|
|
#define WI_STYPE_MGMT_ATIM 0x0090 /* announcement traffic ind msg */
|
|
#define WI_STYPE_MGMT_DISAS 0x00A0 /* disassociation */
|
|
#define WI_STYPE_MGMT_AUTH 0x00B0 /* authentication */
|
|
#define WI_STYPE_MGMT_DEAUTH 0x00C0 /* deauthentication */
|
|
|
|
struct wi_mgmt_hdr {
|
|
u_int16_t frame_ctl;
|
|
u_int16_t duration;
|
|
u_int8_t dst_addr[6];
|
|
u_int8_t src_addr[6];
|
|
u_int8_t bssid[6];
|
|
u_int16_t seq_ctl;
|
|
};
|
|
|
|
/*
|
|
* Lucent/wavelan IEEE signal strength cache
|
|
*
|
|
* driver keeps cache of last
|
|
* MAXWICACHE packets to arrive including signal strength info.
|
|
* daemons may read this via ioctl
|
|
*
|
|
* Each entry in the wi_sigcache has a unique macsrc.
|
|
*/
|
|
#ifdef WICACHE
|
|
#define MAXWICACHE 10
|
|
|
|
struct wi_sigcache {
|
|
char macsrc[6]; /* unique MAC address for entry */
|
|
int ipsrc; /* ip address associated with packet */
|
|
int signal; /* signal strength of the packet */
|
|
int noise; /* noise value */
|
|
int quality; /* quality of the packet */
|
|
};
|
|
#endif
|
|
|
|
struct wi_counters {
|
|
u_int32_t wi_tx_unicast_frames;
|
|
u_int32_t wi_tx_multicast_frames;
|
|
u_int32_t wi_tx_fragments;
|
|
u_int32_t wi_tx_unicast_octets;
|
|
u_int32_t wi_tx_multicast_octets;
|
|
u_int32_t wi_tx_deferred_xmits;
|
|
u_int32_t wi_tx_single_retries;
|
|
u_int32_t wi_tx_multi_retries;
|
|
u_int32_t wi_tx_retry_limit;
|
|
u_int32_t wi_tx_discards;
|
|
u_int32_t wi_rx_unicast_frames;
|
|
u_int32_t wi_rx_multicast_frames;
|
|
u_int32_t wi_rx_fragments;
|
|
u_int32_t wi_rx_unicast_octets;
|
|
u_int32_t wi_rx_multicast_octets;
|
|
u_int32_t wi_rx_fcs_errors;
|
|
u_int32_t wi_rx_discards_nobuf;
|
|
u_int32_t wi_tx_discards_wrong_sa;
|
|
u_int32_t wi_rx_WEP_cant_decrypt;
|
|
u_int32_t wi_rx_msg_in_msg_frags;
|
|
u_int32_t wi_rx_msg_in_bad_msg_frags;
|
|
};
|
|
|
|
/*
|
|
* Network parameters, static configuration entities.
|
|
*/
|
|
#define WI_RID_PORTTYPE 0xFC00 /* Connection control characteristics */
|
|
#define WI_RID_MAC_NODE 0xFC01 /* MAC address of this station */
|
|
#define WI_RID_DESIRED_SSID 0xFC02 /* Service Set ID for connection */
|
|
#define WI_RID_OWN_CHNL 0xFC03 /* Comm channel for BSS creation */
|
|
#define WI_RID_OWN_SSID 0xFC04 /* IBSS creation ID */
|
|
#define WI_RID_OWN_ATIM_WIN 0xFC05 /* ATIM window time for IBSS creation */
|
|
#define WI_RID_SYSTEM_SCALE 0xFC06 /* scale that specifies AP density */
|
|
#define WI_RID_MAX_DATALEN 0xFC07 /* Max len of MAC frame body data */
|
|
#define WI_RID_MAC_WDS 0xFC08 /* MAC addr of corresponding WDS node */
|
|
#define WI_RID_PM_ENABLED 0xFC09 /* ESS power management enable */
|
|
#define WI_RID_PM_EPS 0xFC0A /* PM EPS/PS mode */
|
|
#define WI_RID_MCAST_RX 0xFC0B /* ESS PM mcast reception */
|
|
#define WI_RID_MAX_SLEEP 0xFC0C /* max sleep time for ESS PM */
|
|
#define WI_RID_HOLDOVER 0xFC0D /* holdover time for ESS PM */
|
|
#define WI_RID_NODENAME 0xFC0E /* ID name of this node for diag */
|
|
#define WI_RID_DTIM_PERIOD 0xFC10 /* beacon interval between DTIMs */
|
|
#define WI_RID_WDS_ADDR1 0xFC11 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_WDS_ADDR2 0xFC12 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_WDS_ADDR3 0xFC13 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_WDS_ADDR4 0xFC14 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_WDS_ADDR5 0xFC15 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_WDS_ADDR6 0xFC16 /* port 1 MAC of WDS link node */
|
|
#define WI_RID_MCAST_PM_BUF 0xFC17 /* PM buffering of mcast */
|
|
#define WI_RID_ENCRYPTION 0xFC20 /* enable/disable WEP */
|
|
#define WI_RID_AUTHTYPE 0xFC21 /* specify authentication type */
|
|
#define WI_RID_P2_TX_CRYPT_KEY 0xFC23
|
|
#define WI_RID_P2_CRYPT_KEY0 0xFC24
|
|
#define WI_RID_P2_CRYPT_KEY1 0xFC25
|
|
#define WI_RID_MICROWAVE_OVEN 0xFC25
|
|
#define WI_RID_P2_CRYPT_KEY2 0xFC26
|
|
#define WI_RID_P2_CRYPT_KEY3 0xFC27
|
|
#define WI_RID_P2_ENCRYPTION 0xFC28
|
|
#define WI_RID_WEP_MAPTABLE 0xFC29
|
|
#define WI_RID_AUTH_CNTL 0xFC2A
|
|
#define WI_RID_ROAMING_MODE 0xFC2D
|
|
#define WI_RID_BASIC_RATE 0xFCB3
|
|
#define WI_RID_SUPPORT_RATE 0xFCB4
|
|
|
|
/*
|
|
* Network parameters, dynamic configuration entities
|
|
*/
|
|
#define WI_RID_MCAST_LIST 0xFC80 /* multicast addrs to put in filter */
|
|
#define WI_RID_CREATE_IBSS 0xFC81 /* create IBSS */
|
|
#define WI_RID_FRAG_THRESH 0xFC82 /* frag len, unicast msg xmit */
|
|
#define WI_RID_RTS_THRESH 0xFC83 /* frame len for RTS/CTS handshake */
|
|
#define WI_RID_TX_RATE 0xFC84 /* data rate for message xmit
|
|
* 0 == Fixed 1mbps
|
|
* 1 == Fixed 2mbps
|
|
* 2 == auto fallback
|
|
*/
|
|
#define WI_RID_PROMISC 0xFC85 /* enable promisc mode */
|
|
#define WI_RID_FRAG_THRESH0 0xFC90
|
|
#define WI_RID_FRAG_THRESH1 0xFC91
|
|
#define WI_RID_FRAG_THRESH2 0xFC92
|
|
#define WI_RID_FRAG_THRESH3 0xFC93
|
|
#define WI_RID_FRAG_THRESH4 0xFC94
|
|
#define WI_RID_FRAG_THRESH5 0xFC95
|
|
#define WI_RID_FRAG_THRESH6 0xFC96
|
|
#define WI_RID_RTS_THRESH0 0xFC97
|
|
#define WI_RID_RTS_THRESH1 0xFC98
|
|
#define WI_RID_RTS_THRESH2 0xFC99
|
|
#define WI_RID_RTS_THRESH3 0xFC9A
|
|
#define WI_RID_RTS_THRESH4 0xFC9B
|
|
#define WI_RID_RTS_THRESH5 0xFC9C
|
|
#define WI_RID_RTS_THRESH6 0xFC9D
|
|
#define WI_RID_TX_RATE0 0xFC9E
|
|
#define WI_RID_TX_RATE1 0xFC9F
|
|
#define WI_RID_TX_RATE2 0xFCA0
|
|
#define WI_RID_TX_RATE3 0xFCA1
|
|
#define WI_RID_TX_RATE4 0xFCA2
|
|
#define WI_RID_TX_RATE5 0xFCA3
|
|
#define WI_RID_TX_RATE6 0xFCA4
|
|
#define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0
|
|
#define WI_RID_TX_CRYPT_KEY 0xFCB1
|
|
#define WI_RID_TICK_TIME 0xFCE0 /* Auxiliary Timer tick interval */
|
|
|
|
struct wi_key {
|
|
u_int16_t wi_keylen;
|
|
u_int8_t wi_keydat[14];
|
|
};
|
|
|
|
struct wi_ltv_keys {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
struct wi_key wi_keys[4];
|
|
};
|
|
|
|
/*
|
|
* NIC information
|
|
*/
|
|
#define WI_RID_DNLD_BUF 0xFD01
|
|
#define WI_RID_MEMSZ 0xFD02 /* memory size info */
|
|
#define WI_RID_PRI_SUP_RANGE 0xFD03 /* primary supplier compatibility */
|
|
#define WI_RID_CIF_ACT_RANGE 0xFD04 /* controller sup. compatibility */
|
|
#define WI_RID_SERIALNO 0xFD0A /* card serial number */
|
|
#define WI_RID_CARD_ID 0xFD0B /* card identification */
|
|
#define WI_RID_MFI_SUP_RANGE 0xFD0C /* modem supplier compatibility */
|
|
#define WI_RID_CFI_SUP_RANGE 0xFD0D /* controller sup. compatibility */
|
|
#define WI_RID_CHANNEL_LIST 0xFD10 /* allowd comm. frequencies. */
|
|
#define WI_RID_REG_DOMAINS 0xFD11 /* list of intendted regulatory doms */
|
|
#define WI_RID_TEMP_TYPE 0xFD12 /* hw temp range code */
|
|
#define WI_RID_CIS 0xFD13 /* PC card info struct */
|
|
#define WI_RID_STA_IDENTITY 0xFD20 /* station funcs firmware ident */
|
|
#define WI_RID_STA_SUP_RANGE 0xFD21 /* station supplier compat */
|
|
#define WI_RID_MFI_ACT_RANGE 0xFD22
|
|
#define WI_RID_CFI_ACT_RANGE 0xFD33
|
|
#define WI_RID_COMMQUAL 0xFD43
|
|
#define WI_RID_SCALETHRESH 0xFD46
|
|
#define WI_RID_PCF 0xFD87
|
|
|
|
/*
|
|
* MAC information
|
|
*/
|
|
#define WI_RID_PORT_STAT 0xFD40 /* actual MAC port con control stat */
|
|
#define WI_RID_CURRENT_SSID 0xFD41 /* ID of actually connected SS */
|
|
#define WI_RID_CURRENT_BSSID 0xFD42 /* ID of actually connected BSS */
|
|
#define WI_RID_COMMS_QUALITY 0xFD43 /* quality of BSS connection */
|
|
#define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */
|
|
#define WI_RID_OWN_BEACON_INT 0xFD45 /* beacon xmit time for BSS creation */
|
|
#define WI_RID_CUR_SCALE_THRESH 0xFD46 /* actual system scane thresh setting */
|
|
#define WI_RID_PROT_RESP_TIME 0xFD47 /* time to wait for resp to req msg */
|
|
#define WI_RID_SHORT_RTR_LIM 0xFD48 /* max tx attempts for short frames */
|
|
#define WI_RID_LONG_RTS_LIM 0xFD49 /* max tx attempts for long frames */
|
|
#define WI_RID_MAX_TX_LIFE 0xFD4A /* max tx frame handling duration */
|
|
#define WI_RID_MAX_RX_LIFE 0xFD4B /* max rx frame handling duration */
|
|
#define WI_RID_CF_POLL 0xFD4C /* contention free pollable ind */
|
|
#define WI_RID_AUTH_ALGS 0xFD4D /* auth algorithms available */
|
|
#define WI_RID_AUTH_TYPE 0xFD4E /* available auth types */
|
|
#define WI_RID_WEP_AVAIL 0xFD4F /* WEP privacy option available */
|
|
#define WI_RID_CUR_TX_RATE1 0xFD80
|
|
#define WI_RID_CUR_TX_RATE2 0xFD81
|
|
#define WI_RID_CUR_TX_RATE3 0xFD82
|
|
#define WI_RID_CUR_TX_RATE4 0xFD83
|
|
#define WI_RID_CUR_TX_RATE5 0xFD84
|
|
#define WI_RID_CUR_TX_RATE6 0xFD85
|
|
#define WI_RID_OWN_MAC 0xFD86 /* unique local MAC addr */
|
|
#define WI_RID_PCI_INFO 0xFD87 /* point coordination func cap */
|
|
|
|
/*
|
|
* Scan Information
|
|
*/
|
|
#define WI_RID_SCAN_REQ 0xFCE1 /* Scan request (STA only) */
|
|
#define WI_RID_JOIN_REQ 0xFCE2 /* Join request (STA only) */
|
|
#define WI_RID_AUTH_STATION 0xFCE3 /* Authenticates Station (AP) */
|
|
#define WI_RID_CHANNEL_REQ 0xFCE4 /* Channel Information Request (AP) */
|
|
#define WI_RID_SCAN_RESULTS 0xFD88 /* Scan Results Table */
|
|
|
|
struct wi_apinfo {
|
|
int scanreason; /* ScanReason */
|
|
char bssid[6]; /* BSSID (mac address) */
|
|
int channel; /* Channel */
|
|
int signal; /* Signal level */
|
|
int noise; /* Average Noise Level*/
|
|
int quality; /* Quality */
|
|
int namelen; /* Length of SSID string */
|
|
char name[32]; /* SSID string */
|
|
int capinfo; /* Capability info. */
|
|
int interval; /* BSS Beacon Interval */
|
|
int rate; /* Data Rate */
|
|
};
|
|
|
|
/*
|
|
* Modem information
|
|
*/
|
|
#define WI_RID_PHY_TYPE 0xFDC0 /* phys layer type indication */
|
|
#define WI_RID_CURRENT_CHAN 0xFDC1 /* current frequency */
|
|
#define WI_RID_PWR_STATE 0xFDC2 /* pwr consumption status */
|
|
#define WI_RID_CCA_MODE 0xFDC3 /* clear chan assess mode indication */
|
|
#define WI_RID_CCA_TIME 0xFDC4 /* clear chan assess time */
|
|
#define WI_RID_MAC_PROC_DELAY 0xFDC5 /* MAC processing delay time */
|
|
#define WI_RID_DATA_RATES 0xFDC6 /* supported data rates */
|
|
|
|
#endif
|