/* $NetBSD: wi_ieee.h,v 1.9 2002/01/21 11:28:18 ichiro Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/i386/include/if_wavelan_ieee.h,v 1.4 1999/12/29 04:33:01 peter Exp $ */ #ifndef _IF_WAVELAN_IEEE_H #define _IF_WAVELAN_IEEE_H /* * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the * Oslo IETF plenary meeting. * The stuff in here should probably go into a generic extension to the * ifmedia goop. * * Michael Graff brought over the encryption bits. */ /* * This header defines a simple command interface to the FreeBSD * WaveLAN/IEEE driver (wi) driver, which is used to set certain * device-specific parameters which can't be easily managed through * ifconfig(8). No, sysctl(2) is not the answer. I said a _simple_ * interface, didn't I. */ #ifndef SIOCSWAVELAN #define SIOCSWAVELAN SIOCSIFGENERIC #endif #ifndef SIOCGWAVELAN #define SIOCGWAVELAN SIOCGIFGENERIC #endif /* * Technically I don't think there's a limit to a record * length. The largest record is the one that contains the CIS * data, which is 240 words long, so 256 should be a safe * value. */ #define WI_MAX_DATALEN 512 struct wi_req { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_val[WI_MAX_DATALEN]; }; /* * Private LTV records (interpreted only by the driver). This is * a minor kludge to allow reading the interface statistics from * the driver. */ #define WI_RID_IFACE_STATS 0x0100 #define WI_RID_MGMT_XMIT 0x0200 #ifdef WICACHE #define WI_RID_ZERO_CACHE 0x0300 #define WI_RID_READ_CACHE 0x0400 #endif #define WI_RID_MONITOR_MODE 0x0500 #define WI_RID_SCAN_APS 0x0600 #define WI_RID_READ_APS 0x0700 struct wi_80211_hdr { u_int16_t frame_ctl; u_int16_t dur_id; u_int8_t addr1[6]; u_int8_t addr2[6]; u_int8_t addr3[6]; u_int16_t seq_ctl; u_int8_t addr4[6]; }; #define WI_FCTL_VERS 0x0002 #define WI_FCTL_FTYPE 0x000C #define WI_FCTL_STYPE 0x00F0 #define WI_FCTL_TODS 0x0100 #define WI_FCTL_FROMDS 0x0200 #define WI_FCTL_MOREFRAGS 0x0400 #define WI_FCTL_RETRY 0x0800 #define WI_FCTL_PM 0x1000 #define WI_FCTL_MOREDATA 0x2000 #define WI_FCTL_WEP 0x4000 #define WI_FCTL_ORDER 0x8000 #define WI_FTYPE_MGMT 0x0000 #define WI_FTYPE_CTL 0x0004 #define WI_FTYPE_DATA 0x0008 #define WI_STYPE_MGMT_ASREQ 0x0000 /* association request */ #define WI_STYPE_MGMT_ASRESP 0x0010 /* association response */ #define WI_STYPE_MGMT_REASREQ 0x0020 /* reassociation request */ #define WI_STYPE_MGMT_REASRESP 0x0030 /* reassociation response */ #define WI_STYPE_MGMT_PROBEREQ 0x0040 /* probe request */ #define WI_STYPE_MGMT_PROBERESP 0x0050 /* probe response */ #define WI_STYPE_MGMT_BEACON 0x0080 /* beacon */ #define WI_STYPE_MGMT_ATIM 0x0090 /* announcement traffic ind msg */ #define WI_STYPE_MGMT_DISAS 0x00A0 /* disassociation */ #define WI_STYPE_MGMT_AUTH 0x00B0 /* authentication */ #define WI_STYPE_MGMT_DEAUTH 0x00C0 /* deauthentication */ struct wi_mgmt_hdr { u_int16_t frame_ctl; u_int16_t duration; u_int8_t dst_addr[6]; u_int8_t src_addr[6]; u_int8_t bssid[6]; u_int16_t seq_ctl; }; /* * Lucent/wavelan IEEE signal strength cache * * driver keeps cache of last * MAXWICACHE packets to arrive including signal strength info. * daemons may read this via ioctl * * Each entry in the wi_sigcache has a unique macsrc. */ #ifdef WICACHE #define MAXWICACHE 10 struct wi_sigcache { char macsrc[6]; /* unique MAC address for entry */ int ipsrc; /* ip address associated with packet */ int signal; /* signal strength of the packet */ int noise; /* noise value */ int quality; /* quality of the packet */ }; #endif struct wi_counters { u_int32_t wi_tx_unicast_frames; u_int32_t wi_tx_multicast_frames; u_int32_t wi_tx_fragments; u_int32_t wi_tx_unicast_octets; u_int32_t wi_tx_multicast_octets; u_int32_t wi_tx_deferred_xmits; u_int32_t wi_tx_single_retries; u_int32_t wi_tx_multi_retries; u_int32_t wi_tx_retry_limit; u_int32_t wi_tx_discards; u_int32_t wi_rx_unicast_frames; u_int32_t wi_rx_multicast_frames; u_int32_t wi_rx_fragments; u_int32_t wi_rx_unicast_octets; u_int32_t wi_rx_multicast_octets; u_int32_t wi_rx_fcs_errors; u_int32_t wi_rx_discards_nobuf; u_int32_t wi_tx_discards_wrong_sa; u_int32_t wi_rx_WEP_cant_decrypt; u_int32_t wi_rx_msg_in_msg_frags; u_int32_t wi_rx_msg_in_bad_msg_frags; }; /* * Network parameters, static configuration entities. */ #define WI_RID_PORTTYPE 0xFC00 /* Connection control characteristics */ #define WI_RID_MAC_NODE 0xFC01 /* MAC address of this station */ #define WI_RID_DESIRED_SSID 0xFC02 /* Service Set ID for connection */ #define WI_RID_OWN_CHNL 0xFC03 /* Comm channel for BSS creation */ #define WI_RID_OWN_SSID 0xFC04 /* IBSS creation ID */ #define WI_RID_OWN_ATIM_WIN 0xFC05 /* ATIM window time for IBSS creation */ #define WI_RID_SYSTEM_SCALE 0xFC06 /* scale that specifies AP density */ #define WI_RID_MAX_DATALEN 0xFC07 /* Max len of MAC frame body data */ #define WI_RID_MAC_WDS 0xFC08 /* MAC addr of corresponding WDS node */ #define WI_RID_PM_ENABLED 0xFC09 /* ESS power management enable */ #define WI_RID_PM_EPS 0xFC0A /* PM EPS/PS mode */ #define WI_RID_MCAST_RX 0xFC0B /* ESS PM mcast reception */ #define WI_RID_MAX_SLEEP 0xFC0C /* max sleep time for ESS PM */ #define WI_RID_HOLDOVER 0xFC0D /* holdover time for ESS PM */ #define WI_RID_NODENAME 0xFC0E /* ID name of this node for diag */ #define WI_RID_DTIM_PERIOD 0xFC10 /* beacon interval between DTIMs */ #define WI_RID_WDS_ADDR1 0xFC11 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR2 0xFC12 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR3 0xFC13 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR4 0xFC14 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR5 0xFC15 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR6 0xFC16 /* port 1 MAC of WDS link node */ #define WI_RID_MCAST_PM_BUF 0xFC17 /* PM buffering of mcast */ #define WI_RID_ENCRYPTION 0xFC20 /* enable/disable WEP */ #define WI_RID_AUTHTYPE 0xFC21 /* specify authentication type */ #define WI_RID_P2_TX_CRYPT_KEY 0xFC23 #define WI_RID_P2_CRYPT_KEY0 0xFC24 #define WI_RID_P2_CRYPT_KEY1 0xFC25 #define WI_RID_MICROWAVE_OVEN 0xFC25 #define WI_RID_P2_CRYPT_KEY2 0xFC26 #define WI_RID_P2_CRYPT_KEY3 0xFC27 #define WI_RID_P2_ENCRYPTION 0xFC28 #define WI_RID_WEP_MAPTABLE 0xFC29 #define WI_RID_AUTH_CNTL 0xFC2A #define WI_RID_ROAMING_MODE 0xFC2D #define WI_RID_BASIC_RATE 0xFCB3 #define WI_RID_SUPPORT_RATE 0xFCB4 /* * Network parameters, dynamic configuration entities */ #define WI_RID_MCAST_LIST 0xFC80 /* multicast addrs to put in filter */ #define WI_RID_CREATE_IBSS 0xFC81 /* create IBSS */ #define WI_RID_FRAG_THRESH 0xFC82 /* frag len, unicast msg xmit */ #define WI_RID_RTS_THRESH 0xFC83 /* frame len for RTS/CTS handshake */ #define WI_RID_TX_RATE 0xFC84 /* data rate for message xmit * 0 == Fixed 1mbps * 1 == Fixed 2mbps * 2 == auto fallback */ #define WI_RID_PROMISC 0xFC85 /* enable promisc mode */ #define WI_RID_FRAG_THRESH0 0xFC90 #define WI_RID_FRAG_THRESH1 0xFC91 #define WI_RID_FRAG_THRESH2 0xFC92 #define WI_RID_FRAG_THRESH3 0xFC93 #define WI_RID_FRAG_THRESH4 0xFC94 #define WI_RID_FRAG_THRESH5 0xFC95 #define WI_RID_FRAG_THRESH6 0xFC96 #define WI_RID_RTS_THRESH0 0xFC97 #define WI_RID_RTS_THRESH1 0xFC98 #define WI_RID_RTS_THRESH2 0xFC99 #define WI_RID_RTS_THRESH3 0xFC9A #define WI_RID_RTS_THRESH4 0xFC9B #define WI_RID_RTS_THRESH5 0xFC9C #define WI_RID_RTS_THRESH6 0xFC9D #define WI_RID_TX_RATE0 0xFC9E #define WI_RID_TX_RATE1 0xFC9F #define WI_RID_TX_RATE2 0xFCA0 #define WI_RID_TX_RATE3 0xFCA1 #define WI_RID_TX_RATE4 0xFCA2 #define WI_RID_TX_RATE5 0xFCA3 #define WI_RID_TX_RATE6 0xFCA4 #define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0 #define WI_RID_TX_CRYPT_KEY 0xFCB1 #define WI_RID_TICK_TIME 0xFCE0 /* Auxiliary Timer tick interval */ struct wi_key { u_int16_t wi_keylen; u_int8_t wi_keydat[14]; }; struct wi_ltv_keys { u_int16_t wi_len; u_int16_t wi_type; struct wi_key wi_keys[4]; }; /* * NIC information */ #define WI_RID_DNLD_BUF 0xFD01 #define WI_RID_MEMSZ 0xFD02 /* memory size info */ #define WI_RID_PRI_SUP_RANGE 0xFD03 /* primary supplier compatibility */ #define WI_RID_CIF_ACT_RANGE 0xFD04 /* controller sup. compatibility */ #define WI_RID_SERIALNO 0xFD0A /* card serial number */ #define WI_RID_CARD_ID 0xFD0B /* card identification */ #define WI_RID_MFI_SUP_RANGE 0xFD0C /* modem supplier compatibility */ #define WI_RID_CFI_SUP_RANGE 0xFD0D /* controller sup. compatibility */ #define WI_RID_CHANNEL_LIST 0xFD10 /* allowd comm. frequencies. */ #define WI_RID_REG_DOMAINS 0xFD11 /* list of intendted regulatory doms */ #define WI_RID_TEMP_TYPE 0xFD12 /* hw temp range code */ #define WI_RID_CIS 0xFD13 /* PC card info struct */ #define WI_RID_STA_IDENTITY 0xFD20 /* station funcs firmware ident */ #define WI_RID_STA_SUP_RANGE 0xFD21 /* station supplier compat */ #define WI_RID_MFI_ACT_RANGE 0xFD22 #define WI_RID_CFI_ACT_RANGE 0xFD33 #define WI_RID_COMMQUAL 0xFD43 #define WI_RID_SCALETHRESH 0xFD46 #define WI_RID_PCF 0xFD87 /* * MAC information */ #define WI_RID_PORT_STAT 0xFD40 /* actual MAC port con control stat */ #define WI_RID_CURRENT_SSID 0xFD41 /* ID of actually connected SS */ #define WI_RID_CURRENT_BSSID 0xFD42 /* ID of actually connected BSS */ #define WI_RID_COMMS_QUALITY 0xFD43 /* quality of BSS connection */ #define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */ #define WI_RID_OWN_BEACON_INT 0xFD45 /* beacon xmit time for BSS creation */ #define WI_RID_CUR_SCALE_THRESH 0xFD46 /* actual system scane thresh setting */ #define WI_RID_PROT_RESP_TIME 0xFD47 /* time to wait for resp to req msg */ #define WI_RID_SHORT_RTR_LIM 0xFD48 /* max tx attempts for short frames */ #define WI_RID_LONG_RTS_LIM 0xFD49 /* max tx attempts for long frames */ #define WI_RID_MAX_TX_LIFE 0xFD4A /* max tx frame handling duration */ #define WI_RID_MAX_RX_LIFE 0xFD4B /* max rx frame handling duration */ #define WI_RID_CF_POLL 0xFD4C /* contention free pollable ind */ #define WI_RID_AUTH_ALGS 0xFD4D /* auth algorithms available */ #define WI_RID_AUTH_TYPE 0xFD4E /* available auth types */ #define WI_RID_WEP_AVAIL 0xFD4F /* WEP privacy option available */ #define WI_RID_CUR_TX_RATE1 0xFD80 #define WI_RID_CUR_TX_RATE2 0xFD81 #define WI_RID_CUR_TX_RATE3 0xFD82 #define WI_RID_CUR_TX_RATE4 0xFD83 #define WI_RID_CUR_TX_RATE5 0xFD84 #define WI_RID_CUR_TX_RATE6 0xFD85 #define WI_RID_OWN_MAC 0xFD86 /* unique local MAC addr */ #define WI_RID_PCI_INFO 0xFD87 /* point coordination func cap */ /* * Scan Information */ #define WI_RID_SCAN_REQ 0xFCE1 /* Scan request (STA only) */ #define WI_RID_JOIN_REQ 0xFCE2 /* Join request (STA only) */ #define WI_RID_AUTH_STATION 0xFCE3 /* Authenticates Station (AP) */ #define WI_RID_CHANNEL_REQ 0xFCE4 /* Channel Information Request (AP) */ #define WI_RID_SCAN_RESULTS 0xFD88 /* Scan Results Table */ struct wi_apinfo { int scanreason; /* ScanReason */ char bssid[6]; /* BSSID (mac address) */ int channel; /* Channel */ int signal; /* Signal level */ int noise; /* Average Noise Level*/ int quality; /* Quality */ int namelen; /* Length of SSID string */ char name[32]; /* SSID string */ int capinfo; /* Capability info. */ int interval; /* BSS Beacon Interval */ int rate; /* Data Rate */ }; /* * Modem information */ #define WI_RID_PHY_TYPE 0xFDC0 /* phys layer type indication */ #define WI_RID_CURRENT_CHAN 0xFDC1 /* current frequency */ #define WI_RID_PWR_STATE 0xFDC2 /* pwr consumption status */ #define WI_RID_CCA_MODE 0xFDC3 /* clear chan assess mode indication */ #define WI_RID_CCA_TIME 0xFDC4 /* clear chan assess time */ #define WI_RID_MAC_PROC_DELAY 0xFDC5 /* MAC processing delay time */ #define WI_RID_DATA_RATES 0xFDC6 /* supported data rates */ #endif