NetBSD/distrib/sun3/common/install.md

NetBSD: install.md,v 1.6 1997/12/15 17:34:05 gwr Exp

Copyright (c) 1996 The NetBSD Foundation, Inc.

All rights reserved.

This code is derived from software contributed to The NetBSD Foundation

by Jason R. Thorpe.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software

must display the following acknowledgement:

This product includes software developed by the NetBSD

Foundation, Inc. and its contributors.

4. Neither the name of The NetBSD Foundation nor the names of its

contributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS

``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

machine dependent section of installation/upgrade script.

Machine-dependent install sets

MDSETS="xbin xman xinc xcon" XXX

MDSETS=""

md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [sun]: " getresp "sun" TERM="$resp" export TERM }

__mount_kernfs() { # Make sure kernfs is mounted. if [ ! -d /kern -o ! -e /kern/msgbuf ]; then mkdir /kern > /dev/null 2>&1 /sbin/mount_kernfs /kern /kern fi }

md_makerootwritable() { # Just remount the root device read-write. if [ ! -e /tmp/root_writable ]; then echo "Remounting root read-write..." __mount_kernfs mount -u /kern/rootdev / swapctl -a /kern/rootdev cp /dev/null /tmp/root_writable fi }

md_get_diskdevs() { # return available disk devices __mount_kernfs sed -n -e '/^sd[0-9] /s/ .//p'
-e '/^xd[0-9] /s/ .//p'
-e '/^xy[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u }

md_get_cddevs() { # return available CDROM devices __mount_kernfs sed -n -e '/^cd[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u }

md_get_ifdevs() { # return available network devices __mount_kernfs sed -n -e '/^ie[0-9] /s/ .//p'
-e '/^le[0-9] /s/ .//p'
< /kern/msgbuf | sort -u }

md_get_partition_range() { # return an expression describing the valid partition id's echo '[a-h]' }

md_installboot() { # install the boot block on disk $1 echo "Installing boot block..." ( cd /usr/mdec ;
cp -p ./ufsboot /mnt/ufsboot ;
sync ; sleep 1 ; sync ;
./installboot -v /mnt/ufsboot bootxx /dev/r${1}a ) echo "done." }

md_native_fstype() { }

md_native_fsopts() { }

md_prep_disklabel() { # $1 is the root disk echo -n "Do you wish to edit the disklabel on ${1}? [y]" getresp "y" case "$resp" in y*|Y*) ;; *) return ;; esac

# display example
cat << \__md_prep_disklabel_1

Here is an example of what the partition information will look like once you have entered the disklabel editor. Disk partition sizes and offsets are in sector (most likely 512 bytes) units. Make sure all partitions start on a cylinder boundary (c/t/s == XXX/0/0).

[Example] partition start (c/t/s) nblks (c/t/s) type

a (root) 0 (0/00/00) 31392 (109/00/00) 4.2BSD b (swap) 31392 (109/00/00) 73440 (255/00/00) swap c (disk) 0 (0/00/00) 1070496 (3717/00/00) unused d (user) 104832 (364/00/00) 30528 (106/00/00) 4.2BSD e (user) 135360 (470/00/00) 40896 (142/00/00) 4.2BSD f (user) 176256 (612/00/00) 92160 (320/00/00) 4.2BSD g (user) 268416 (932/00/00) 802080 (2785/00/00) 4.2BSD

[End of example]

Hit the key when you have read this...

__md_prep_disklabel_1 getresp "" edlabel /dev/r${1}c }

md_copy_kernel() { echo -n "Copying kernel..." cp -p /netbsd /mnt/netbsd echo "done." }

md_welcome_banner() { if [ "$MODE" = "install" ]; then echo "" echo "Welcome to the NetBSD/sun3 ${VERSION} installation program." cat << __welcome_banner_1

This program is designed to help you put NetBSD on your disk, in a simple and rational way. You'll be asked several questions, and it would probably be useful to have your disk's hardware manual, the installation notes, and a calculator handy. __welcome_banner_1

else
	echo ""
	echo "Welcome to the NetBSD/sun3 ${VERSION} upgrade program."
	cat << \__welcome_banner_2

This program is designed to help you upgrade your NetBSD system in a simple and rational way.

As a reminder, installing the etc' binary set is NOT recommended. Once the rest of your system has been upgraded, you should manually merge any changes to files in the etc' set into those files which already exist on your system. __welcome_banner_2 fi

cat << __welcome_banner_3

As with anything which modifies your disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your data is backed up before beginning the installation process.

Default answers are displayed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. Also, quitting in the middle of installation may leave your system in an inconsistent state.

__welcome_banner_3 }

md_not_going_to_install() { cat << __not_going_to_install_1

OK, then. Enter `halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.

__not_going_to_install_1 }

md_congrats() { local what; if [ "$MODE" = "install" ]; then what="installed"; else what="upgraded"; fi cat << __congratulations_1

CONGRATULATIONS! You have successfully $what NetBSD! To boot the installed system, enter halt at the command prompt. Once the system has halted, reset the machine and boot from the disk.

__congratulations_1 }