NetBSD/distrib/sparc/install.md

NetBSD: install.md,v 1.22 2010/09/25 14:29:13 tsutsui Exp

Copyright (c) 1996 The NetBSD Foundation, Inc.

All rights reserved.

This code is derived from software contributed to The NetBSD Foundation

by Jason R. Thorpe.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS

``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

machine dependent section of installation/upgrade script.

Machine-dependent install sets

MDSETS="kern xbase xcomp xfont xserver"

if [ "$MODE" = upgrade ]; then RELOCATED_FILES_13="${RELOCATED_FILES_13} /usr/sbin/installboot /usr/mdec/installboot" fi

md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [vt100]: " getresp "vt100" TERM="$resp" export TERM }

md_makerootwritable() { # Was: do_mfs_mount "/tmp" "2048" # /tmp is the mount point # 2048 is the size in DEV_BIZE blocks

umount /tmp > /dev/null 2>&1
if ! mount_mfs -s 2048 swap /tmp ; then
	cat << \__mfs_failed_1

FATAL ERROR: Can't mount the memory filesystem.

__mfs_failed_1 exit fi

# Bleh.  Give mount_mfs a chance to DTRT.
sleep 2

}

md_get_diskdevs() { # return available disk devices dmesg | sed -n -e 's/^sd[0-9] ./\1/p' -e 's/^x[dy][0-9] ./\1/p' | sort -u }

md_get_cddevs() { # return available CDROM devices dmesg | sed -n -e 's/^cd[0-9] .*/\1/p' | sort -u }

md_get_ifdevs() { # return available network devices dmesg | sed -n -e 's/^le[0-9] ./\1/p' -e 's/^ie[0-9] ./\1/p' | sort -u }

md_get_partition_range() { # return range of valid partition letters echo "[a-h]" }

md_installboot() { # $1 is the boot disk echo "Installing boot block..." cp -p /usr/mdec/boot /mnt/boot /usr/sbin/installboot -v /dev/r${1}a /usr/mdec/bootxx /boot }

md_native_fstype() { }

md_native_fsopts() { }

md_checkfordisklabel() { # $1 is the disk to check local rval local cfdl

cfdl=`disklabel $1 2>&1 > /dev/null | \
    sed -n -e '/no disk label/{s/.*/ndl/p;q;}; \
	 /disk label corrupted/{s/.*/dlc/p;q;}; \
	 $s/.*/no/p'`
if [ x$cfdl = xndl ]; then
	rval=1
elif [ x$cfdl = xdlc ]; then
	rval=2
else
	rval=0
fi

return $rval

}

md_prep_disklabel() { local _disk

_disk=$1
md_checkfordisklabel $_disk
case $? in
0)
	echo -n "Do you wish to edit the disklabel on $_disk? [y]"
	;;
1)
	echo "WARNING: Disk $_disk has no label"
	echo -n "Do you want to create one with the disklabel editor? [y]"
	;;
2)
	echo "WARNING: Label on disk $_disk is corrupted"
	echo -n "Do you want to try and repair the damage using the disklabel editor? [y]"
	;;
esac

getresp "y"
case "$resp" in
y*|Y*) ;;
*)	return ;;
esac

# display example
cat << \__md_prep_disklabel_1

Here is an example of what the partition information will look like once you have entered the disklabel editor. Disk partition sizes and offsets are in sector (most likely 512 bytes) units. Make sure these size/offset pairs are on cylinder boundaries (the number of sector per cylinder is given in the `sectors/cylinder' entry, which is not shown here).

Do not change any parameters except the partition layout and the label name. It's probably also wisest not to touch the `8 partitions:' line, even in case you have defined less than eight partitions.

[Example] 8 partitions:

size offset fstype [fsize bsize cpg]

a: 50176 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 111) b: 64512 50176 swap # (Cyl. 112 - 255) c: 640192 0 unknown # (Cyl. 0 - 1428) d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428) [End of example]

__md_prep_disklabel_1 echo -n "Press [Enter] to continue " getresp "" disklabel -W ${_disk} if [ -f /usr/bin/vi ]; then disklabel -e ${_disk} else disklabel -i ${_disk} fi }

md_copy_kernel() { if [ ! -f /mnt/netbsd ]; then echo -n "WARNING: No kernel installed; " if [ -f /netbsd ]; then echo -n "copying miniroot kernel... " cp -p /netbsd /mnt/netbsd echo "done." else echo -n "install a kernel manually." fi fi }

md_welcome_banner() { { if [ "$MODE" = "install" ]; then echo "" echo "Welcome to the NetBSD/sparc ${VERSION} installation program." cat << __welcome_banner_1

This program is designed to help you put NetBSD on your disk, in a simple and rational way. You'll be asked several questions, and it would probably be useful to have your disk's hardware manual, the installation notes, and a calculator handy. __welcome_banner_1

else
	echo ""
	echo "Welcome to the NetBSD/sparc ${VERSION} upgrade program."
	cat << \__welcome_banner_2

This program is designed to help you upgrade your NetBSD system in a simple and rational way.

As a reminder, installing the etc' binary set is NOT recommended. Once the rest of your system has been upgraded, you should manually merge any changes to files in the etc' set into those files which already exist on your system. __welcome_banner_2 fi

cat << __welcome_banner_3

As with anything which modifies your disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your data is backed up before beginning the installation process.

Default answers are displayed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. Also, quitting in the middle of installation may leave your system in an inconsistent state.

__welcome_banner_3 } | more }

md_not_going_to_install() { cat << __not_going_to_install_1

OK, then. Enter `halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.

__not_going_to_install_1 }

md_congrats() { local what; if [ "$MODE" = "install" ]; then what="installed"; else what="upgraded"; fi cat << __congratulations_1

CONGRATULATIONS! You have successfully $what NetBSD! To boot the installed system, enter halt at the command prompt. Once the system has halted, reset the machine and boot from the disk.

__congratulations_1 }

md_lib_is_aout() { local r test -h $1 && return 1 test -f $1 || return 1

[ "`dd if=$1 bs=1 skip=1 count=3 2> /dev/null`" = "ELF" ] && return 1
return 0

}

md_mv_usr_lib() { local root root=$1 for f in $root/usr/lib/lib*.so.[0-9].[0-9] ; do md_lib_is_aout $f || continue mv -f $f $root/emul/aout/usr/lib || return 1 done return 0 }

md_x_shlib_set_14="
libICE.so.6.3
libPEX5.so.6.0
libSM.so.6.0
libX11.so.6.1
libXIE.so.6.0
libXaw.so.6.1
libXext.so.6.3
libXi.so.6.0
libXmu.so.6.0
libXp.so.6.2
libXt.so.6.0
libXtst.so.6.1
liboldX.so.6.0"

md_mv_x_lib() { local root xlibdir root=$1 xlibdir=$2 for f in $md_x_shlib_set_14; do md_lib_is_aout $root/$xlibdir/$f || continue mv -f $root/$xlibdir/$f $root/emul/aout/$xlibdir || return 1 done return 0 }

md_mv_aout_libs() { local root xlibdir

root=/mnt	# XXX - should be global

if [ -d $root/emul/aout/. ]; then
	echo "Using existing /emul/aout directory"
else
	echo "Creating /emul/aout hierachy"
	mkdir -p $root/usr/aout || return 1

	if [ ! -d $root/emul ]; then
		mkdir $root/emul || return 1
	fi

	if [ -h $root/emul/aout ]; then
		echo "Preserving existing symbolic link from /emul/aout"
		mv -f $root/emul/aout $root/emul/aout.old || return 1
	fi

	ln -s ../usr/aout $root/emul/aout || return 1
fi

# Create /emul/aout/etc and /emul/aout/usr/lib
if [ ! -d $root/emul/aout/etc ]; then
	mkdir $root/emul/aout/etc || return 1
fi
if [ ! -d $root/emul/aout/usr/lib ]; then
	mkdir -p $root/emul/aout/usr/lib || return 1
fi

# Move ld.so.conf
if [ -f $root/etc/ld.so.conf ]; then
	mv -f $root/etc/ld.so.conf $root/emul/aout/etc || return 1
fi

# Finally, move the aout shared libraries from /usr/lib
md_mv_usr_lib $root || return 1

# If X11 is installed, move the those libraries as well
xlibdir="/usr/X11R6/lib"
if [ -d $root/$xlibdir/. ]; then
	mkdir -p $root/emul/aout/$xlibdir || return 1
	md_mv_x_lib $root $xlibdir || return 1
fi

echo "a.out emulation environment setup completed."

}

md_prepare_upgrade()
{ cat << 'EOF' This release uses the ELF binary object format. Existing (a.out) binaries can still be used on your system after it has been upgraded, provided that the shared libraries needed by those binaries are made available in the filesystem hierarchy rooted at /emul/aout.

This upgrade procedure will now establish this hierarchy by moving all shared libraries in a.out format found in /usr/lib to /emul/aout/usr/lib. It will also move the X11 shared libraries in a.out format from previous NetBSD/sparc X11 installation sets, if they are installed.

EOF md_mv_aout_libs || { echo "Failed to setup a.out emulation environment" return 1 } return 0 }

Flag to notify upgrade.sh of the existence of md_prepare_upgrade()

md_upgrade_prep_needed=1