NetBSD/distrib/atari/floppies/prepare/install.md

NetBSD: install.md,v 1.1.1.1 2002/04/12 21:11:46 leo Exp

Copyright (c) 1996 The NetBSD Foundation, Inc.

All rights reserved.

This code is derived from software contributed to The NetBSD Foundation

by Jason R. Thorpe.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software

must display the following acknowledgement:

This product includes software developed by the NetBSD

Foundation, Inc. and its contributors.

4. Neither the name of The NetBSD Foundation nor the names of its

contributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS

``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

machine dependent section of installation/upgrade script.

VERSION= # filled in automatically (see list) export VERSION

md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [vt220]: " getresp "vt220" TERM="$resp" export TERM }

__mount_kernfs() { # # Force kern_fs to be mounted # if [ ! -d /kern -o ! -e /kern/msgbuf ]; then mkdir /kern > /dev/null 2>&1 /sbin/mount_kernfs /kern /kern >/dev/null 2>&1 fi }

md_makerootwritable() { # Mount root rw for convenience of the tester ;-) if [ ! -e /tmp/.root_writable ]; then __mount_kernfs mount -t ffs -u /kern/rootdev / > /dev/null 2>&1 cp /dev/null /tmp/.root_writable fi }

md_get_diskdevs() { # return available disk devices __mount_kernfs sed -n -e '/^[sw]d[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u }

md_prep_disklabel() { # $1 is the root disk # Note that the first part of this function is just a very verbose # version of md_label_disk().

cat << \__md_prep_disklabel_1

You now have to prepare your root disk for the installation of NetBSD. This is further referred to as 'labeling' a disk.

First you get the chance to edit or create an AHDI compatible partitioning on the installation disk. Note that NetBSD can do without AHDI partitions, check the documentation. If you want to use an AHDI compatible partitioning, you have to assign some partitions to NetBSD before NetBSD is able to use the disk. Change the 'id' of all partitions you want to use for NetBSD filesystems to 'NBD'. Change the 'id' of the partition you wish to use for swap to 'SWP'.

Hit the key when you have read this... __md_prep_disklabel_1 getresp "" ahdilabel /dev/r${1}c

# display example
cat << \__md_prep_disklabel_3

Here is an example of what the partition information will look like once you have entered the disklabel editor. Disk partition sizes and offsets are in sector (most likely 512 bytes) units.

[Example] partition start (c/t/s) nblks (c/t/s) type

a (root) 0 (0/00/00) 31392 (109/00/00) 4.2BSD b (swap) 31392 (109/00/00) 73440 (255/00/00) swap c (disk) 0 (0/00/00) 1070496 (3717/00/00) unused d (user) 104832 (364/00/00) 30528 (106/00/00) 4.2BSD e (user) 135360 (470/00/00) 40896 (142/00/00) 4.2BSD f (user) 176256 (612/00/00) 92160 (320/00/00) 4.2BSD g (user) 268416 (932/00/00) 802080 (2785/00/00) 4.2BSD

[End of example]

Hit the key when you have read this...

__md_prep_disklabel_3 getresp "" edlabel /dev/r${1}c

cat << \__md_prep_disklabel_4

You will now be given the opportunity to place disklabels on any additional disks on your system. __md_prep_disklabel_4

_DKDEVS=`rmel ${1} ${_DKDEVS}`
resp="X"	# force at least one iteration
while [ "X$resp" != X"done" ]; do
	labelmoredisks
done

}

md_labeldisk() { edahdi /dev/r${1}c < /dev/null > /dev/null 2>&1 [ ? -eq 0 ] && edahdi /dev/r{1}c edlabel /dev/r${1}c }

md_welcome_banner() { echo "" echo "Welcome to the NetBSD/atari ${VERSION} preparation program." cat << __welcome_banner_1

This program is designed to partition your disk in preparation of the NetBSD installation. At this stage, the only thing you must setup is a swap partition. If you wish, the remaining partitioning work might be delayed until the actual installation.

As with anything which modifies your disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your data is backed up before beginning the preparation process.

Default answers are displayed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. __welcome_banner_1 }

md_not_going_to_install() { cat << __not_going_to_install_1

OK, then. Enter `halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.

Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the program will restart itself.

__not_going_to_install_1 }

md_congrats() { cat << __congratulations_1

CONGRATULATIONS! You have successfully partitioned your disks! Now you can use file2swap.ttp to transfer the install.fs to your swap partition and continue the installation. Enter halt at the command prompt. Once the system has halted, reset the machine and re-boot it.

Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the installer will restart itself.

__congratulations_1 }