NetBSD/sys/dev/pci
1999-05-20 09:23:33 +00:00
..
adv_pci.c Fix AdvanSys Narrow driver to work on Alpha 1999-02-25 20:20:30 +00:00
adw_pci.c
ahc_pci.c
bha_pci.c
com_puc.c
cy_pci.c
devlist2h.awk
eap.c Pass the correct address (PCI bus address, not PA) to the card. 1999-02-18 07:59:30 +00:00
files.pci Start commit of Lan Media Corp T1/HSSI/DS3 driver 1999-03-25 00:51:53 +00:00
i82365_pci.c Fix up support for PCI attachments of pcic devices on i386 in general, 1998-12-20 17:53:28 +00:00
i82365_pcivar.h Fix up support for PCI attachments of pcic devices on i386 in general, 1998-12-20 17:53:28 +00:00
if_de.c Rework layer 2 protocol input routines. Instead of calling e.g. ether_input() 1999-05-18 23:52:51 +00:00
if_devar.h Fix typo. (From PR 7027) 1999-04-01 14:55:25 +00:00
if_en_pci.c in general, it's a good idea to make sure you at least have all of the 1999-03-24 18:47:51 +00:00
if_ep_pci.c Improve card descriptions. 1999-02-19 06:57:56 +00:00
if_epic_pci.c Make sure bus mastering is enabled. 1999-03-24 01:05:15 +00:00
if_esh_pci.c
if_ex_pci.c Fix typo. 1999-02-20 07:07:07 +00:00
if_fpa.c
if_fxp.c Rework layer 2 protocol input routines. Instead of calling e.g. ether_input() 1999-05-18 23:52:51 +00:00
if_fxpreg.h
if_fxpvar.h Back out to the previous stable revision of the fxp driver. The latest 1999-02-18 01:23:41 +00:00
if_le_pci.c
if_levar.h
if_lmc_common.c Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver 1999-03-25 03:32:43 +00:00
if_lmc_media.c Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver 1999-03-25 03:32:43 +00:00
if_lmc_nbsd.c just say no to __BROKEN_INDIRECT_CONFIG 1999-05-12 22:55:14 +00:00
if_lmc_types.h wrap kernel bits in shared kernel/userland files 1999-03-25 04:09:33 +00:00
if_lmc.c Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver 1999-03-25 03:32:43 +00:00
if_lmcioctl.h wrap kernel bits in shared kernel/userland files 1999-03-25 04:09:33 +00:00
if_lmcvar.h Set the data link type to DLT_PPP_SERIAL so that tcpdump can do 1999-05-11 02:57:58 +00:00
if_ne_pci.c
if_ntwoc_pci.c RCS ID police 1999-02-15 04:54:34 +00:00
if_ntwoc_pcireg.h RCS ID police 1999-02-15 04:54:34 +00:00
if_tl.c Rework layer 2 protocol input routines. Instead of calling e.g. ether_input() 1999-05-18 23:52:51 +00:00
if_tlregs.h
if_tlvar.h Because memory mapped access doesn't fail only with the docking station 1999-01-11 22:45:41 +00:00
if_vr.c Rework layer 2 protocol input routines. Instead of calling e.g. ether_input() 1999-05-18 23:52:51 +00:00
if_vrreg.h Garbage-collect some unneeded definitions. 1999-02-12 00:37:07 +00:00
isp_pci.c Do a fairly large internal restructuring to accomodate dual-bus host adapters 1999-05-12 18:59:23 +00:00
lpt_puc.c
Makefile install if_lmc*.h 1999-03-25 03:54:43 +00:00
Makefile.pcidevs Tron whacked my you-know-what because I didn't follow procedure. 1999-03-16 22:41:56 +00:00
ncr.c Don't DMA the scsi command from or the sense data to the scsipi_xfer 1998-12-13 00:11:37 +00:00
ncrreg.h
ncrstat.c
ohci_pci.c Rework the way ukbd attaches itself as the console (again). We now allow 1999-05-13 23:34:38 +00:00
opl_sv.c Add a driver for the S3 SonicVibes chip. From OpenBSD and 1998-12-10 18:47:18 +00:00
pci_map.c
pci_quirks.c
pci_subr.c use a symbolic definition for the PCI subsystem ID 1998-12-21 20:56:06 +00:00
pci.c Back out previous. Thanks to cgd for pointing out another way to do this. 1999-05-06 01:10:28 +00:00
pcidevs Change vendor id 0x11c1 to Lucent since that seems to be what it is now. 1999-05-20 09:23:08 +00:00
pcidevs_data.h Regen. 1999-05-20 09:23:33 +00:00
pcidevs.h Regen. 1999-05-20 09:23:33 +00:00
pciide_acer_reg.h Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing 1999-02-02 16:13:59 +00:00
pciide_apollo_reg.h Rearange the modes setup to allow these to be dyanmically changed. Fill 1998-12-16 12:48:45 +00:00
pciide_cmd_reg.h
pciide_cy693_reg.h
pciide_piix_reg.h
pciide_sis_reg.h
pciide.c Fix the way we compute the mode to use: for multiword DMA, the used mode was 1999-05-05 15:24:59 +00:00
pciidereg.h Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing 1999-02-02 16:13:59 +00:00
pciidevar.h
pcireg.h add two of the newer register definitions 1998-12-21 20:31:54 +00:00
pcivar.h Back out previous. Thanks to cgd for pointing out another way to do this. 1999-05-06 01:10:28 +00:00
pcscp.c Fix a couple of problems in the PCscsi-PCI driver: 1999-04-25 01:20:02 +00:00
pcscpreg.h Device driver for the AMD Am53c974 PCscsi-PCI SCSI chip (i.e. the chip used 1999-01-06 23:23:33 +00:00
ppb.c
ppbreg.h
puc.c add code to cope with multiple ports per BAR, as are found, for instance, 1999-02-06 06:29:54 +00:00
pucdata.c put in better name/description for Simon G's board 1999-02-06 06:55:15 +00:00
pucvar.h add code to cope with multiple ports per BAR, as are found, for instance, 1999-02-06 06:29:54 +00:00
README
sv.c initialize 'p' for lame gcc-2.7.2.2 flow analysis. 1999-04-14 03:26:34 +00:00
svreg.h Add a driver for the S3 SonicVibes chip. From OpenBSD and 1998-12-10 18:47:18 +00:00
svvar.h spaces -> tabs 1999-02-18 00:55:36 +00:00
tga_bt463.c Rototillage; make this actually useful. To wit: 1999-04-30 02:47:42 +00:00
tga_bt485.c completely remove Mach VM support. all that is left is the all the 1999-03-24 05:50:49 +00:00
tga_conf.c
tga.c Accelerate scrolling. Originally by Roland Dowdeswell, revised by 1999-04-28 23:24:33 +00:00
tgareg.h
tgavar.h
uhci_pci.c Rework the way ukbd attaches itself as the console (again). We now allow 1999-05-13 23:34:38 +00:00
vga_pci.c
vga_pcivar.h

$NetBSD: README,v 1.3 1998/08/15 03:02:46 mycroft Exp $

This directory contains files which are used during PCI configuration
and PCI device drivers.  Eventually, most of the device drivers and
some of the configuration support should become machine-independent
and be moved to a more general location.

The configuration support was implemented according to the `PCI Local
Bus Specification, Production Version, Revision 2.0' dated April 30,
1993.  Section numbers referred to in the code may be specific to that
edition of the specification.

Some attempt has been made to insure that the code works on rogue
machines where the BIOS doesn't do its job, but in general I can't
guarantee that.

--
- Charles M. Hannum
  NetBSD group
  August 8, 1994