5.2 KiB
#!/bin/sh
NetBSD: install.md,v 1.4 2008/04/30 13:10:48 martin Exp
Copyright (c) 1996 The NetBSD Foundation, Inc.
All rights reserved.
This code is derived from software contributed to The NetBSD Foundation
by Jason R. Thorpe.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
machine dependent section of installation/upgrade script
Machine-dependent install sets
MDSETS=""
md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [vt220]: " getresp "vt220" TERM="$resp" export TERM # XXX call tset? }
md_makerootwritable() { # Was: do_mfs_mount "/tmp" "2048" # /tmp is the mount point # 2048 is the size in DEV_BIZE blocks
umount /tmp > /dev/null 2>&1
if ! mount_mfs -s 2048 swap /tmp ; then
cat << \__mfs_failed_1
FATAL ERROR: Can't mount the memory filesystem.
__mfs_failed_1 exit fi
# Bleh. Give mount_mfs a chance to DTRT.
sleep 2
}
md_get_diskdevs() { # return available disk devices dmesg | awk -F : '/^sd[0-9]*:.*cylinders/ { print $1; }' | sort -u }
md_get_cddevs() { # return available CD-ROM devices dmesg | awk -F : '/cd[0-9]*:.*CD-ROM/ { print $1; }' | sort -u }
md_get_ifdevs() { # return available network interfaces dmesg | awk -F : '/^ae[0-9]:/ { print $1; }' | sort -u dmesg | awk -F : '/^sn[0-9]:/ { print $1; }' | sort -u }
md_installboot() { # $1 is the root disk
# We don't have boot blocks. Sigh.
}
md_checkfordisklabel() { # $1 is the disk to check
# We don't support labels on the mac68k port. (Yet.)
rval="0"
}
md_labeldisk() { # $1 is the disk to label
# We don't support labels on the mac68k port. (Yet.)
}
md_prep_disklabel() { # $1 is the root disk
# We don't support labels on the mac68k port. (Yet.)
}
md_copy_kernel() { echo -n "Copying kernel..." cp -p /netbsd /mnt/netbsd echo "done." }
# Note, while they might not seem machine-dependent, the
# welcome banner and the punt message may contain information
# and/or instructions specific to the type of machine.
md_welcome_banner() { ( echo "" echo "Welcome to the NetBSD/mac68k ${VERSION} installation program." cat << __welcome_banner_1
This program is designed to help you install NetBSD on your system in a simple and rational way. You'll be asked several questions, and it would probably be useful to have your disk's hardware manual, the installation notes, and a calculator handy.
In particular, you will need to know some reasonably detailed information about your disk's geometry. This program can determine some limited information about certain specific types of HP-IB disks. If you have SCSI disks, however, prior knowledge of disk geometry is absolutely essential. The kernel will attempt to display geometry information for SCSI disks during boot, if possible. If you did not make it note of it before, you may wish to reboot and jot down your disk's geometry before proceeding.
As with anything which modifies your hard disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your hard drive is backed up before beginning the installation process.
Default answers are displyed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. Also, quitting in the middle of installation may leave your system in an inconsistent state.
__welcome_banner_1 ) | more }
md_not_going_to_install() { cat << __not_going_to_install_1
OK, then. Enter 'halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.
__not_going_to_install_1 }
md_congrats() { cat << __congratulations_1
CONGRATULATIONS! You have successfully installed NetBSD! To boot the installed system, enter halt at the command prompt. Once the system has halted, power-cycle the machine in order to load new boot code. Make sure you boot from the root disk.
__congratulations_1 }
md_native_fstype() { # Nothing to do. }
md_native_fsopts() { # Nothing to do. }