NetBSD/distrib/amiga/miniroot/install.md

12 KiB

NetBSD: install.md,v 1.22 2003/01/15 07:20:52 mhitch Exp

Copyright (c) 1996 The NetBSD Foundation, Inc.

All rights reserved.

This code is derived from software contributed to The NetBSD Foundation

by Jason R. Thorpe.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software

must display the following acknowledgement:

This product includes software developed by the NetBSD

Foundation, Inc. and its contributors.

4. Neither the name of The NetBSD Foundation nor the names of its

contributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS

``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

machine dependent section of installation/upgrade script.

Machine-dependent install sets

MDSETS="kern-GENERIC xbase xcomp xcontrib xfont xmisc xserver"

md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [vt220]: " getresp "vt220" TERM="$resp" export TERM }

__mount_kernfs() { # # Force kern_fs to be mounted # if [ ! -d /kern -o ! -e /kern/msgbuf ]; then mkdir /kern > /dev/null 2>&1 /sbin/mount_kernfs /kern /kern >/dev/null 2>&1 fi }

md_makerootwritable() { # Mount root rw for convenience of the tester ;-) if ! cp /dev/null /tmp/.root_writable >/dev/null 2>&1; then __mount_kernfs # XXX: Use /kern/rootdev instead? mount -t ffs -u /kern/rootdev / > /dev/null 2>&1 fi }

md_get_diskdevs() { # return available disk devices __mount_kernfs sed -n -e '/^[sw]d[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u }

md_get_cddevs() { # return available CDROM devices __mount_kernfs sed -n -e '/^cd[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u }

md_get_partition_range() { # return an expression describing the valid partition id's echo '[a-p]' }

md_installboot() { if [ -x /mnt/usr/sbin/installboot ]; then echo -n "Should a boot block be installed? [y] " getresp "y" case "$resp" in y*|Y*) echo "Installing boot block..." chroot /mnt /usr/sbin/installboot /dev/r${1}a /usr/mdec/bootxx_ffs cp -p /mnt/usr/mdec/boot.amiga /mnt/ ;; *) echo "No bootblock installed." ;; esac elif [ "$MODE" = "install" ]; then cat << __md_installboot_1 There is no installboot program found on the installed filesystems. No boot programs are installed. __md_installboot_1 else cat << __md_installboot_2 There is no installboot program found on the upgraded filesystems. No boot programs are installed. __md_installboot_2 fi }

md_native_fstype() { echo "ados" }

md_native_fsopts() { echo "ro" }

md_prep_disklabel() { _DKDEVS=md_get_diskdevs echo "If you like, you can now examine the labels of your disks." echo "" echo -n "Available are "${_DKDEVS}". Look at which? [skip this step] " getresp "done" while [ "X$resp" != "Xdone" ]; do echo "" disklabel ${resp} echo "" echo -n "Available are "${_DKDEVS}". Look at which? [done] " getresp "done" done cat << __prep_disklabel_1

As a reminder: the 'c' partition is assigned to the whole disk and can't normally be used for a any file system!

__prep_disklabel_1 }

md_labeldisk() { }

md_welcome_banner() { if [ "$MODE" = "install" ]; then echo "" echo "Welcome to the NetBSD/amiga ${VERSION} installation program." cat << __welcome_banner_1

This program is designed to help you put NetBSD on your disk, in a simple and rational way. You'll be asked several questions, and it would probably be useful to have your disk's hardware manual, the installation notes, and a calculator handy. __welcome_banner_1

else
	echo ""
	echo "Welcome to the NetBSD/amiga ${VERSION} upgrade program."
	cat << \__welcome_banner_2

This program is designed to help you upgrade your NetBSD system in a simple and rational way.

As a reminder, installing the etc' binary set is NOT recommended. Once the rest of your system has been upgraded, you should manually merge any changes to files in the etc' set into those files which already exist on your system. __welcome_banner_2 fi

cat << __welcome_banner_3

As with anything which modifies your disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your data is backed up before beginning the installation process.

Default answers are displayed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. Also, quitting in the middle of installation may leave your system in an inconsistent state.

__welcome_banner_3 }

md_not_going_to_install() { cat << __not_going_to_install_1

OK, then. Enter `halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.

Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the installer will restart itself.

__not_going_to_install_1 }

md_congrats() { local what; if [ "$MODE" = "install" ]; then what="installed"; else what="upgraded"; fi cat << __congratulations_1

CONGRATULATIONS! You have successfully $what NetBSD! To boot the installed system, enter halt at the command prompt. Once the system has halted, reset the machine and boot from the disk.

Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the installer will restart itself.

__congratulations_1 }

md_copy_kernel() { # This is largely a copy of install_disk and install_from_mounted_fs() # with some special frobbing.

local _directory
local _sets
local _filename
local _f

if [ "$MODE" = "install" ]; then
	echo -n "Adding keymap initialization to rc.local..."
	echo /usr/sbin/loadkmap ${__keymap__} >> /mnt/etc/rc.local
	echo "done."
fi

if [ -e /netbsd ]; then
	if [ -e /mnt/netbsd ]; then
		echo "On the installation filesystem there is this kernel: "
		ls -l /netbsd
		echo "The already installed kernel is: "
		ls -l /mnt/netbsd
		echo	"Do you want to replace the already installed kernel by the kernel"
		echo -n "on the installation filesystem? (y/n) [n] "
		resp="n"
		getresp ""
		if [ "${resp}" != "y" -a "${resp}" != "Y" ]; then
			return
		fi
	fi

	echo -n "Copying kernel..."
	cp -p /netbsd /mnt/netbsd
	echo "done."
	return
fi

cat << __md_copy_kernel_1 Your installation set did not include a netbsd kernel on the installation filesystem. You are now given the opportunity install it from either the kernel-floppy from the distribution or another location on one of your disks.

The following disk devices are installed on your system; please select the disk device containing the partition with the netbsd kernel: __md_copy_kernel_1

_DKDEVS=`md_get_diskdevs`
echo    "$_DKDEVS"
echo	"fd0"
echo	""
_DKDEVS="$_DKDEVS fd0"		# Might be on the kernel floppy!
echo -n	"Which is the disk with the kernel? [abort] "

if mount_a_disk ; then
	return	# couldn't mount the disk
fi

# Get the directory where the file lives
resp=""		# force one iteration
while [ "X${resp}" = X"" ]; do
	echo "Enter the directory relative to the mount point that"
	echo -n "contains the file. [${_directory}] "
	getresp "${_directory}"
done
_directory=$resp

_sets=`(cd /mnt2/$_directory; ls netbsd* 2> /dev/null)`
if [ -z "$_sets" ]; then
	echo "There are no NetBSD kernels available in \"$1\""
	umount -f /mnt2 > /dev/null 2>&1
	return
fi
while : ; do
	echo "The following kernels are available:"
	echo ""

	for _f in $_sets ; do
		echo "    $_f"
	done
	echo ""
	set -- $_sets
	echo -n "File name [$1]? "
	getresp "$1"
	_f=$resp
	_filename="/mnt2/$_directory/$_f"

	# Ensure file exists
	if [ ! -f $_filename ]; then
		echo "File $_filename does not exist.  Check to make"
		echo "sure you entered the information properly."
		echo -n "Do you want to retry [y]? "
		getresp "y"
		if [ "$resp" = "n" ]; then
			break
		fi
		continue
	fi

	# Copy the kernel
	cp $_filename /mnt
	break
done
umount -f /mnt2 > /dev/null 2>&1

}

md_lib_is_aout() { local r test -h $1 && return 1 test -f $1 || return 1

r=`file $1 | sed -n -e '/ELF/p'`
test -z "$r" || return 1
return 0

}

md_mv_usr_lib() { local root root=$1 for f in $root/usr/lib/lib*.so.[0-9].[0-9] ; do md_lib_is_aout $f || continue mv -f $f $root/emul/aout/usr/lib || return 1 done return 0 }

md_x_shlib_set_14="
libICE.so.6.3
libPEX5.so.6.0
libSM.so.6.0
libX11.so.6.1
libXIE.so.6.0
libXaw.so.6.1
libXext.so.6.3
libXi.so.6.0
libXmu.so.6.0
libXp.so.6.2
libXt.so.6.0
libXtst.so.6.1
liboldX.so.6.0"

md_mv_x_lib() { local root xlibdir root=$1 xlibdir=$2 for f in $md_x_shlib_set_14; do md_lib_is_aout $root/$xlibdir/$f || continue mv -f $root/$xlibdir/$f $root/emul/aout/$xlibdir || return 1 done return 0 }

md_mv_aout_libs() { local root xlibdir

root=/mnt	# XXX - should be global

if [ -d $root/emul/aout/. ]; then
	echo "Using existing /emul/aout directory"
else
	echo "Creating /emul/aout hierachy"
	mkdir -p $root/usr/aout || return 1

	if [ ! -d $root/emul ]; then
		mkdir $root/emul || return 1
	fi

	if [ -h $root/emul/aout ]; then
		echo "Preserving existing symbolic link from /emul/aout"
		mv -f $root/emul/aout $root/emul/aout.old || return 1
	fi

	ln -s ../usr/aout $root/emul/aout || return 1
fi

# Create /emul/aout/etc and /emul/aout/usr/lib
if [ ! -d $root/emul/aout/etc ]; then
	mkdir $root/emul/aout/etc || return 1
fi
if [ ! -d $root/emul/aout/usr/lib ]; then
	mkdir -p $root/emul/aout/usr/lib || return 1
fi

# Move ld.so.conf
if [ -f $root/etc/ld.so.conf ]; then
	mv -f $root/etc/ld.so.conf $root/emul/aout/etc || return 1
fi

# Finally, move the aout shared libraries from /usr/lib
md_mv_usr_lib $root || return 1

# If X11 is installed, move the those libraries as well
xlibdir="/usr/X11R6/lib"
if [ -d $root/$xlibdir/. ]; then
	mkdir -p $root/emul/aout/$xlibdir || return 1
	md_mv_x_lib $root $xlibdir || return 1
fi

echo "a.out emulation environment setup completed."

}

md_prepare_upgrade()
{ cat << 'EOF' This release uses the ELF binary object format. Existing (a.out) binaries can still be used on your system after it has been upgraded, provided that the shared libraries needed by those binaries are made available in the filesystem hierarchy rooted at /emul/aout.

This upgrade procedure will now establish this hierarchy by moving all shared libraries in a.out format found in /usr/lib to /emul/aout/usr/lib. It will also move the X11 shared libraries in a.out format from previous NetBSD/amiga X11 installation sets, if they are installed.

EOF md_mv_aout_libs || { echo "Failed to setup a.out emulation environment" return 1 } return 0 }

Flag to notify upgrade.sh of the existence of md_prepare_upgrade()

md_upgrade_prep_needed=1