10 KiB
NetBSD: install.md,v 1.15 2001/08/16 19:14:40 tv Exp
Copyright (c) 1996 The NetBSD Foundation, Inc.
All rights reserved.
This code is derived from software contributed to The NetBSD Foundation
by Jason R. Thorpe.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
must display the following acknowledgement:
This product includes software developed by the NetBSD
Foundation, Inc. and its contributors.
4. Neither the name of The NetBSD Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
machine dependent section of installation/upgrade script.
Machine-dependent install sets
MDSETS="xbase xcomp xcontrib xfont xserver"
md_set_term() { if [ ! -z "$TERM" ]; then return fi echo -n "Specify terminal type [vt220]: " getresp "vt220" TERM="$resp" export TERM }
__mount_kernfs() { # # Force kern_fs to be mounted # if [ ! -d /kern -o ! -e /kern/msgbuf ]; then mkdir /kern > /dev/null 2>&1 /sbin/mount_kernfs /kern /kern >/dev/null 2>&1 fi }
md_makerootwritable() { # Mount root rw for convenience of the tester ;-) if [ ! -e /tmp/.root_writable ]; then __mount_kernfs mount -t ffs -u /kern/rootdev / > /dev/null 2>&1 cp /dev/null /tmp/.root_writable fi }
md_get_diskdevs() {
# return available disk devices
__mount_kernfs
sed -n -e '/^[sw]d[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u
}
md_get_cddevs() {
# return available CDROM devices
__mount_kernfs
sed -n -e '/^cd[0-9] /s/ .*//p'
< /kern/msgbuf | sort -u
}
md_get_ifdevs() {
# return available network devices
__mount_kernfs
sed -n -e '/^ie[0-9] /s/ .//p'
-e '/^le[0-9] /s/ .//p'
< /kern/msgbuf | sort -u
}
md_get_partition_range() { # return an expression describing the valid partition id's echo '[a-p]' }
md_installboot() { if [ -x /mnt/usr/mdec/installboot ]; then echo -n "Should a boot block be installed? [y] " getresp "y" case "$resp" in y*|Y*) echo "Installing boot block..." chroot /mnt /usr/mdec/installboot -v $1 ;; *) echo "No bootblock installed..." ;; esac elif [ "$MODE" = "install" ]; then cat << __md_installboot_1 There is no installboot program found on the installed filesystems. No boot programs are installed. __md_installboot_1 else cat << __md_installboot_2 There is no installboot program found on the upgraded filesystems. No boot programs are installed. __md_installboot_2 fi }
md_native_fstype() { echo "msdos" }
md_native_fsopts() { echo "-G,ro" }
md_prep_disklabel() { # $1 is the root disk # Note that the first part of this function is just a very verbose # version of md_label_disk().
cat << \__md_prep_disklabel_1
You now have to prepare your root disk for the installation of NetBSD. This is further referred to as 'labeling' a disk.
First you get the chance to edit or create an AHDI compatible partitioning on the installation disk. Note that NetBSD can do without AHDI partitions, check the documentation. If you want to use an AHDI compatible partitioning, you have to assign some partitions to NetBSD before NetBSD is able to use the disk. Change the 'id' of all partitions you want to use for NetBSD filesystems to 'NBD'. Change the 'id' of the partition you wish to use for swap to 'NBS' or 'SWP'.
Hit the key when you have read this... __md_prep_disklabel_1 getresp "" ahdilabel /dev/r${1}c
# display example
cat << \__md_prep_disklabel_3
Here is an example of what the partition information will look like once you have entered the disklabel editor. Disk partition sizes and offsets are in sector (most likely 512 bytes) units.
[Example] partition start (c/t/s) nblks (c/t/s) type
a (root) 0 (0/00/00) 31392 (109/00/00) 4.2BSD b (swap) 31392 (109/00/00) 73440 (255/00/00) swap c (disk) 0 (0/00/00) 1070496 (3717/00/00) unused d (user) 104832 (364/00/00) 30528 (106/00/00) 4.2BSD e (user) 135360 (470/00/00) 40896 (142/00/00) 4.2BSD f (user) 176256 (612/00/00) 92160 (320/00/00) 4.2BSD g (user) 268416 (932/00/00) 802080 (2785/00/00) 4.2BSD
[End of example]
Hit the key when you have read this...
__md_prep_disklabel_3 getresp "" edlabel /dev/r${1}c
cat << \__md_prep_disklabel_4
You will now be given the opportunity to place disklabels on any additional disks on your system. __md_prep_disklabel_4
_DKDEVS=`rmel ${1} ${_DKDEVS}`
resp="X" # force at least one iteration
while [ "X$resp" != X"done" ]; do
labelmoredisks
done
}
md_labeldisk() { edahdi /dev/r${1}c < /dev/null > /dev/null 2>&1 [ $? -eq 0 ] && edahdi /dev/r${1}c edlabel /dev/r${1}c }
md_welcome_banner() { if [ "$MODE" = "install" ]; then echo "" echo "Welcome to the NetBSD/atari ${VERSION} installation program." cat << __welcome_banner_1
This program is designed to help you put NetBSD on your disk, in a simple and rational way. You'll be asked several questions, and it would probably be useful to have your disk's hardware manual, the installation notes, and a calculator handy. __welcome_banner_1
else
echo ""
echo "Welcome to the NetBSD/atari ${VERSION} upgrade program."
cat << \__welcome_banner_2
This program is designed to help you upgrade your NetBSD system in a simple and rational way.
As a reminder, installing the etc' binary set is NOT recommended. Once the rest of your system has been upgraded, you should manually merge any changes to files in the etc' set into those files which
already exist on your system.
__welcome_banner_2
fi
cat << __welcome_banner_3
As with anything which modifies your disk's contents, this program can cause SIGNIFICANT data loss, and you are advised to make sure your data is backed up before beginning the installation process.
Default answers are displayed in brackets after the questions. You can hit Control-C at any time to quit, but if you do so at a prompt, you may have to hit return. Also, quitting in the middle of installation may leave your system in an inconsistent state.
__welcome_banner_3 }
md_not_going_to_install() { cat << __not_going_to_install_1
OK, then. Enter `halt' at the prompt to halt the machine. Once the machine has halted, power-cycle the system to load new boot code.
Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the installer will restart itself.
__not_going_to_install_1 }
md_congrats() { local what; if [ "$MODE" = "install" ]; then what="installed"; else what="upgraded"; fi cat << __congratulations_1
CONGRATULATIONS! You have successfully $what NetBSD! To boot the installed system, enter halt at the command prompt. Once the system has halted, reset the machine and boot from the disk.
Note: If you wish to have another try. Just type '^D' at the prompt. After a moment, the installer will restart itself.
__congratulations_1 }
md_copy_kernel() { # This is largely a copy of install_disk and install_from_mounted_fs() # with some special frobbing.
local _directory
local _sets
local _filename
local _f
if [ -e /netbsd ]; then
echo -n "Copying kernel..."
cp -p /netbsd /mnt/netbsd
echo "done."
return
fi
cat << __md_copy_kernel_1 Your installation set did not include a netbsd kernel on the installation filesystem. You are now given the opportunity install it from either the kernel-floppy from the distribution or another location on one of your disks.
The following disk devices are installed on your system; please select the disk device containing the partition with the netbsd kernel: __md_copy_kernel_1
_DKDEVS=`md_get_diskdevs`
echo "$_DKDEVS"
echo "fd0"
echo ""
_DKDEVS="$_DKDEVS fd0" # Might be on the kernel floppy!
echo -n "Which is the disk with the kernel? [abort] "
if mount_a_disk ; then
return # couldn't mount the disk
fi
# Get the directory where the file lives
resp="" # force one iteration
while [ "X${resp}" = X"" ]; do
echo "Enter the directory relative to the mount point that"
echo -n "contains the file. [${_directory}] "
getresp "${_directory}"
done
_directory=$resp
_sets=`(cd /mnt2/$_directory; ls netbsd* 2> /dev/null)`
if [ -z "$_sets" ]; then
echo "There are no NetBSD kernels available in \"$1\""
umount -f /mnt2 > /dev/null 2>&1
return
fi
while : ; do
echo "The following kernels are available:"
echo ""
for _f in $_sets ; do
echo " $_f"
done
echo ""
set -- $_sets
echo -n "File name [$1]? "
getresp "$1"
_f=$resp
_filename="/mnt2/$_directory/$_f"
# Ensure file exists
if [ ! -f $_filename ]; then
echo "File $_filename does not exist. Check to make"
echo "sure you entered the information properly."
echo -n "Do you want to retry [y]? "
getresp "y"
if [ "$resp" = "n" ]; then
break
fi
continue
fi
# Copy the kernel
cp $_filename /mnt
break
done
umount -f /mnt2 > /dev/null 2>&1
}