265 lines
11 KiB
C
265 lines
11 KiB
C
/* $NetBSD: pciide_i31244_reg.h,v 1.2 2005/02/11 21:12:32 rearnsha Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2002 Wasabi Systems, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed for the NetBSD Project by
|
|
* Wasabi Systems, Inc.
|
|
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
|
|
* or promote products derived from this software without specific prior
|
|
* written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_PCI_PCIIDE_I31244_REG_H_
|
|
#define _DEV_PCI_PCIIDE_I31244_REG_H_
|
|
|
|
/*
|
|
* Register definitions for the Intel i31244 Serial ATA Controller.
|
|
*/
|
|
|
|
/*
|
|
* In DPA mode, the i31244 has a single 64-bit BAR.
|
|
*/
|
|
#define ARTISEA_PCI_DPA_BASE PCI_MAPREG_START
|
|
|
|
/*
|
|
* Extended Control and Status Register 0
|
|
*/
|
|
#define ARTISEA_PCI_SUECSR0 0x98
|
|
#define SUECSR0_LED0_ONLY (1U << 28) /* activity on LED0 only */
|
|
#define SUECSR0_SFSS (1U << 16) /* Superset Features
|
|
Secondary Select */
|
|
|
|
#define ARTISEA_PCI_SUDCSCR 0xa0
|
|
#define SUDCSCR_DMA_WCAE 0x02 /* Write cache align enable */
|
|
#define SUDCSCR_DMA_RCAE 0x01 /* Read cache align enable */
|
|
|
|
/*
|
|
* DPA mode shared registers.
|
|
*/
|
|
#define ARTISEA_SUPDIPR 0x00 /* DPA interrupt pending register */
|
|
#define SUPDIPR_PORTSHIFT(x) ((x) * 8)
|
|
#define SUPDIPR_PHY_CS (1U << 0) /* PHY change state */
|
|
#define SUPDIPR_PHY_RDY (1U << 1) /* PHY ready */
|
|
#define SUPDIPR_FIFO_ERR (1U << 2) /* FIFO error */
|
|
#define SUPDIPR_ERR_RCVD (1U << 3) /* ERR received */
|
|
#define SUPDIPR_U_FIS_R (1U << 4) /* unrecog. FIS reception */
|
|
#define SUPDIPR_DATA_I (1U << 5) /* data integrity */
|
|
#define SUPDIPR_CRC_ED (1U << 6) /* CRC error detected */
|
|
#define SUPDIPR_IDE (1U << 7) /* IDE interrupt */
|
|
|
|
#define ARTISEA_SUPDIMR 0x04 /* DPA interrupt mask register */
|
|
/* See SUPDIPR bits. */
|
|
|
|
/*
|
|
* DPA mode offset to per-port registers.
|
|
*/
|
|
#define ARTISEA_DPA_PORT_BASE(x) (((x) + 1) * 0x200)
|
|
|
|
/*
|
|
* DPA mode per-port registers.
|
|
*/
|
|
#define ARTISEA_SUPDDR 0x00 /* DPA data port register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDER 0x04 /* DPA error register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDFR 0x06 /* DPA features register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDCSR 0x08 /* DPA sector count register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDSNR 0x0c /* DPA sector number register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDCLR 0x10 /* DPA cylinder low register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDCHR 0x14 /* DPA cylinder high register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDDHR 0x18 /* DPA device/head register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDSR 0x1c /* DPA status register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDCR 0x1d /* DPA command register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDASR 0x28 /* DPA alt. status register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDDCTLR 0x29 /* DPA device control register */
|
|
/* ATA/ATAPI compatible */
|
|
|
|
#define ARTISEA_SUPDUDDTPR 0x64 /* DPA upper DMA desc. table pointer */
|
|
|
|
#define ARTISEA_SUPDUDDPR 0x6c /* DPA upper DMA data buffer pointer */
|
|
|
|
#define ARTISEA_SUPDDCMDR 0x70 /* DPA DMA command register */
|
|
/* Almost compatible with PCI IDE, but not quite. */
|
|
#define SUPDDCMDR_START (1U << 0) /* start DMA transfer (c) */
|
|
#define SUPDDCMDR_WRITE (1U << 3) /* write *to memory* (c) */
|
|
#define SUPDDCMDR_DP_DMA_ACT (1U << 8) /* first party DMA active */
|
|
#define SUPDDCMDR_FP_DMA_DIR (1U << 9) /* 1 = host->device */
|
|
|
|
#define ARTISEA_SUPDDSR 0x72 /* DPA DMA status register */
|
|
/* PCI IDE compatible */
|
|
|
|
#define ARTISEA_SUPDDDTPR 0x74 /* DPA DMA desc. table pointer */
|
|
|
|
#define ARTISEA_SUPERSET_DPA_OFF 0x100 /* offset to Superset regs: DPA mode */
|
|
|
|
#define ARTISEA_SUPDSSSR 0x000 /* DPA SATA SStatus register */
|
|
#define SUPDSSSR_IPM_NP (0 << 8) /* device not present */
|
|
#define SUPDSSSR_IPM_ACT (1U << 8) /* active state */
|
|
#define SUPDSSSR_IPM_PARTIAL (2U << 8) /* partial power mgmt */
|
|
#define SUPDSSSR_IPM_SLUMBER (6U << 8) /* slumber power mgmt */
|
|
#define SUPDSSSR_SPD_NP (0 << 4) /* device not present */
|
|
#define SUPDSSSR_SPD_G1 (1U << 4) /* Generation 1 speed */
|
|
#define SUPDSSSR_DET_NP (0 << 0) /* device not present */
|
|
#define SUPDSSSR_DET_PHY_CNE (1U << 0) /* PHY comm. not established */
|
|
#define SUPDSSSR_DET_PHY_CE (3U << 0) /* PHY comm. established */
|
|
#define SUPDSSSR_DET_PHY_LOOP (4U << 0) /* loopback mode */
|
|
|
|
#define ARTISEA_SUPDSSER 0x004 /* DPA SATA SError register */
|
|
#define SUPDSSER_DIAG_F (1U << 25) /* invalid FIS type */
|
|
#define SUPDSSER_DIAG_T (1U << 24) /* not implemented */
|
|
#define SUPDSSER_DIAG_S (1U << 23) /* not implemented */
|
|
#define SUPDSSER_DIAG_H (1U << 22) /* handshake error */
|
|
#define SUPDSSER_DIAG_C (1U << 21) /* CRC error */
|
|
#define SUPDSSER_DIAG_D (1U << 20) /* disparity error */
|
|
#define SUPDSSER_DIAG_B (1U << 19) /* not implemented */
|
|
#define SUPDSSER_DIAG_W (1U << 18) /* comm wake */
|
|
#define SUPDSSER_DIAG_I (1U << 17) /* not implemented */
|
|
#define SUPDSSER_DIAG_N (1U << 16) /* PHY RDY state change */
|
|
#define SUPDSSER_ERR_E (1U << 11) /* internal error */
|
|
#define SUPDSSER_ERR_P (1U << 10) /* protocol error */
|
|
#define SUPDSSER_ERR_C (1U << 9) /* non-recovered comm. */
|
|
#define SUPDSSER_ERR_T (1U << 8) /* non-recovered TDIE */
|
|
#define SUPDSSER_ERR_M (1U << 1) /* recovered comm. */
|
|
#define SUPDSSER_ERR_I (1U << 0) /* not implemented */
|
|
|
|
#define ARTISEA_SUPDSSCR 0x008 /* DPA SATA SControl register */
|
|
#define SUPDSSCR_IPM_ANY (0 << 8) /* no IPM mode restrictions */
|
|
#define SUPDSSCR_IPM_NO_PARTIAL (1U << 8) /* no PARTIAL mode */
|
|
#define SUPDSSCR_IPM_NO_SLUMBER (2U << 8) /* no SLUMBER mode */
|
|
#define SUPDSSCR_IPM_NONE (3U << 8) /* no PM allowed */
|
|
#define SUPDSSCR_SPD_ANY (0 << 4) /* no speed restrictions */
|
|
#define SUPDSSCR_SPD_G1 (1U << 4) /* <= Generation 1 */
|
|
#define SUPDSSCR_DET_NORM (0 << 0) /* normal operation */
|
|
#define SUPDSSCR_DET_INIT (1U << 0) /* comm. init */
|
|
#define SUPDSSCR_DET_DISABLE (4U << 0) /* disable interface */
|
|
|
|
#define ARTISEA_SUPDSDBR 0x00c /* DPA Set Device Bits register */
|
|
|
|
#define ARTISEA_SUPDPFR 0x040 /* DPA PHY feature register */
|
|
#define SUPDPFR_SSCEN (1U << 16) /* SSC enable */
|
|
#define SUPDPFR_FVS (1U << 14) /* full voltage swing */
|
|
|
|
#define ARTISEA_SUPDBFCSR 0x044 /* DPA BIST FIS ctrl/stat register */
|
|
#define SUPDBFCSR_PAT_D21_5 (0 << 30) /* D21.5s */
|
|
#define SUPDBFCSR_PAT_D24_3 (1U << 30) /* D24.3s */
|
|
#define SUPDBFCSR_PAT_D10_2 (2U << 30) /* D10.2 / K28.5 */
|
|
#define SUPDBFCSR_PAT_COUNT (3U << 30) /* counting */
|
|
#define SUPDBFCSR_CS_D21_5 (0 << 28)
|
|
#define SUPDBFCSR_CS_D24_3 (1U << 28)
|
|
#define SUPDBFCSR_CS_D10_2 (2U << 28)
|
|
#define SUPDBFCSR_CS_COUNT (3U << 30)
|
|
#define SUPDBFCSR_CLEAR_ERRS (1U << 25) /* clear errors/frames */
|
|
#define SUPDBFCSR_CE (1U << 24) /* BIST check enable */
|
|
#define SUPDBFCSR_PE (1U << 23) /* BIST pattern enable */
|
|
#define SUPDBFCSR_K28_5 ((1U << 16) | \
|
|
(1U << 8) /* send K28.5s */
|
|
#define SUPDBFCSR_BIST_ACT_RX (1U << 15) /* BIST Act. FIS was rx'd */
|
|
#define SUPDBFCSR_BIST_ACT_RX_TO (1U << 14) /* ...with transmit-only */
|
|
#define SUPDBFCSR_BIST_ACT_RX_AB (1U << 13) /* ...with align-bypass */
|
|
#define SUPDBFCSR_BIST_ACT_RX_SB (1U << 12) /* ...with scrambling-bypass */
|
|
#define SUPDBFCSR_BIST_ACT_RX_RT (1U << 11) /* ...with retimed */
|
|
#define SUPDBFCSR_BIST_ACT_RX_P (1U << 10) /* ...with primitive */
|
|
#define SUPDBFCSR_BIST_ACT_RX_AFEL (1U << 9) /* ...with AFE loopback */
|
|
#define SUPDBFCSR_BIST_ACT_TX (1U << 7) /* send BIST Act. FIS */
|
|
#define SUPDBFCSR_BIST_ACT_TX_TO (1U << 6) /* ...with transmit-only */
|
|
#define SUPDBFCSR_BIST_ACT_TX_AB (1U << 5) /* ...with align-bypass */
|
|
#define SUPDBFCSR_BIST_ACT_TX_SB (1U << 4) /* ...with scrambling-bypass */
|
|
#define SUPDBFCSR_BIST_ACT_TX_RT (1U << 3) /* ...with retimed */
|
|
#define SUPDBFCSR_BIST_ACT_TX_P (1U << 2) /* ...with primitive */
|
|
#define SUPDBFCSR_BIST_ACT_TX_AFEL (1U << 1) /* ...with AFE loopback */
|
|
#define SUPDBFCSR_INIT_NE_TO (1U << 0) /* init. near-end tx-only */
|
|
|
|
#define ARTISEA_SUPDBER 0x048 /* DPA BIST errors register */
|
|
|
|
#define ARTISEA_SUPDBFR 0x04c /* DPA BIST frames register */
|
|
|
|
#define ARTISEA_SUPDHBDLR 0x050 /* DPA Host BIST data low register */
|
|
|
|
#define ARTISEA_SUPDHBDHR 0x054 /* DPA Host BIST data high register */
|
|
|
|
#define ARTISEA_SUPDDBDLR 0x058 /* DPA Device BIST data low */
|
|
|
|
#define ARTISEA_SUPDDBDHR 0x05c /* DPA Device BIST data high */
|
|
|
|
#define ARTISEA_SUPDDSFCSR 0x068 /* DPA DMA setup FIS ctrl/stat */
|
|
#define SUPDDSFCSR_DIR (1U << 31) /* First Party setup FIS
|
|
word 0 direction bit
|
|
(1 == tx -> rx) */
|
|
#define SUPDDSFCSR_INTR (1U << 30) /* rcvd's First Party setup
|
|
FIS with I bit set */
|
|
#define SUPDDSFCSR_START_SETUP (1U << 28) /* send DMA setup FIS */
|
|
#define SUPDDSFCSR_EN_FP_AP (1U << 27) /* enab. FP DMA auto-process */
|
|
#define SUPDDSFCSR_ABORT_TSM (1U << 24) /* abort xport/link SMs */
|
|
|
|
#define ARTISEA_SUPDHDBILR 0x06c /* DPA Host DMA Buff. Id low */
|
|
|
|
#define ARTISEA_SUPDHDBIHR 0x070 /* DPA Host DMA Buff. Id high */
|
|
|
|
#define ARTISEA_SUPDHRDR0 0x074 /* DPA Host Resvd. DWORD 0 */
|
|
|
|
#define ARTISEA_SUPDHDBOR 0x078 /* DPA Host DMA Buff. offset */
|
|
|
|
#define ARTISEA_SUPDHDTCR 0x07c /* DPA Host DMA xfer count */
|
|
|
|
#define ARTISEA_SUPDHRDR1 0x080 /* DPA Host Resvd. DWORD 1 */
|
|
|
|
#define ARTISEA_SUPDDDBILR 0x084 /* DPA Device DMA Buff. Id low */
|
|
|
|
#define ARTISEA_SUPDDDBIHR 0x088 /* DPA Device DMA Buff. Id high */
|
|
|
|
#define ARTISEA_SUPDDRDR0 0x08c /* DPA Device Resvd. DWORD 0 */
|
|
|
|
#define ARTISEA_SUPDDDBOR 0x090 /* DPA Device DMA Buff. offset */
|
|
|
|
#define ARTISEA_SUPDDTCR 0x094 /* DPA Device DMA xfer count */
|
|
|
|
#define ARTISEA_SUPDDRDR1 0x09c /* DPA Device Resvd. DWORD 1 */
|
|
|
|
#endif /* _DEV_PCI_PCIIDE_I31244_REG_H_ */
|