NetBSD/sys/dev/mii
briggs 7f9445d14a It is best to allow a little time for the reset to settle in before
we start polling the BMCR again.  Greg Woods noted on tech-net@
that the DP83840A manual states that there should be a 500us delay
between asserting software reset and attempting MII serial operations.

I've also noted that a DP83815 can get into a bad state on cable
removal and reinsertion if we do not delay here.

This may well address PR/16346, and I seem to recall occasional
reports of auto-negotiation and flaky kinds of errors that this
might also alleviate.
2003-09-10 05:25:22 +00:00
..
Makefile.miidevs
acphy.c
acphyreg.h
amhphy.c
amhphyreg.h
bmtphy.c Only read media status bits when they are valid. 2003-06-06 23:22:56 +00:00
bmtphyreg.h
brgphy.c Add support for the BCM5705: 2003-07-17 11:44:26 +00:00
brgphyreg.h
devlist2h.awk
dmphy.c
dmphyreg.h
exphy.c
files.mii
gentbi.c
glxtphy.c
glxtphyreg.h
gphyter.c
gphyterreg.h
icsphy.c - last commit (rev. 1.32) fixes icsphy_reset()'s problem. ICSphys don't 2003-07-01 22:51:13 +00:00
icsphyreg.h Add ICS1889 and 1892 2003-07-01 22:46:08 +00:00
inphy.c
inphyreg.h
iophy.c
iophyreg.h
lxtphy.c
lxtphyreg.h
makphy.c
makphyreg.h
mii.c
mii.h
mii_bitbang.c
mii_bitbang.h
mii_physubr.c It is best to allow a little time for the reset to settle in before 2003-09-10 05:25:22 +00:00
miidevs Add support for the BCM5705: 2003-07-17 11:44:26 +00:00
miidevs.h Regen. 2003-07-17 12:40:56 +00:00
miidevs_data.h Regen. 2003-07-17 12:40:56 +00:00
miivar.h - last commit (rev. 1.36) add a entry to keep model number of the PHY in 2003-07-01 22:58:48 +00:00
nsphy.c
nsphyreg.h
nsphyter.c
nsphyterreg.h
pnaphy.c
qsphy.c
qsphyreg.h
sqphy.c
sqphyreg.h
tlphy.c
tlphyreg.h
tlphyvar.h
tqphy.c
tqphyreg.h
ukphy.c
ukphy_subr.c
urlphy.c Remove advertising clauses from code written by Shingo WATANABE. 2003-09-04 15:17:38 +00:00
urlphyreg.h Remove advertising clauses from code written by Shingo WATANABE. 2003-09-04 15:17:38 +00:00