575 lines
16 KiB
C
575 lines
16 KiB
C
/* $NetBSD: makphy.c,v 1.73 2024/02/09 22:08:35 andvar Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: makphy.c,v 1.73 2024/02/09 22:08:35 andvar Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include <dev/mii/miidevs.h>
|
|
|
|
#include <dev/mii/makphyreg.h>
|
|
#include <dev/mii/makphyvar.h>
|
|
|
|
static int makphymatch(device_t, cfdata_t, void *);
|
|
static void makphyattach(device_t, device_t, void *);
|
|
|
|
CFATTACH_DECL_NEW(makphy, sizeof(struct makphy_softc),
|
|
makphymatch, makphyattach, mii_phy_detach, mii_phy_activate);
|
|
|
|
static int makphy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void makphy_status(struct mii_softc *);
|
|
static void makphy_reset(struct mii_softc *);
|
|
|
|
static const struct mii_phy_funcs makphy_funcs = {
|
|
makphy_service, makphy_status, makphy_reset,
|
|
};
|
|
|
|
static const struct mii_phydesc makphys[] = {
|
|
MII_PHY_DESC(MARVELL, E1000_0),
|
|
MII_PHY_DESC(MARVELL, E1000_3),
|
|
MII_PHY_DESC(MARVELL, E1000_5),
|
|
MII_PHY_DESC(MARVELL, E1000_6),
|
|
MII_PHY_DESC(xxMARVELL, E1000_3),
|
|
MII_PHY_DESC(xxMARVELL, E1000_5),
|
|
MII_PHY_DESC(xxMARVELL, E1000S),
|
|
MII_PHY_DESC(xxMARVELL, E1011),
|
|
MII_PHY_DESC(xxMARVELL, E1101),
|
|
MII_PHY_DESC(xxMARVELL, E1111),
|
|
MII_PHY_DESC(xxMARVELL, E1112),
|
|
MII_PHY_DESC(xxMARVELL, E1116),
|
|
MII_PHY_DESC(xxMARVELL, E1116R),
|
|
MII_PHY_DESC(xxMARVELL, E1118),
|
|
MII_PHY_DESC(xxMARVELL, E1145),
|
|
MII_PHY_DESC(xxMARVELL, E1149),
|
|
MII_PHY_DESC(xxMARVELL, E1149R),
|
|
MII_PHY_DESC(xxMARVELL, E1240),
|
|
MII_PHY_DESC(xxMARVELL, E1318S),
|
|
MII_PHY_DESC(xxMARVELL, E1512),
|
|
MII_PHY_DESC(xxMARVELL, E1543),
|
|
MII_PHY_DESC(xxMARVELL, E3016),
|
|
MII_PHY_DESC(xxMARVELL, E3082),
|
|
MII_PHY_DESC(xxMARVELL, PHYG65G),
|
|
MII_PHY_DESC(xxMARVELL, I347),
|
|
MII_PHY_END,
|
|
};
|
|
|
|
#define MAKARG_PDOWN true /* Power DOWN */
|
|
#define MAKARG_PUP false /* Power UP */
|
|
|
|
static bool
|
|
makphy_isi210(device_t parent, struct mii_attach_args *ma)
|
|
{
|
|
|
|
/* I21[01]'s model number is 0 */
|
|
if ((MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_xxMARVELL)
|
|
&& (MII_MODEL(ma->mii_id2) == MII_MODEL_xxMARVELL_I210)
|
|
&& (device_is_a(parent, "wm")))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static int
|
|
makphymatch(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct mii_attach_args *ma = aux;
|
|
|
|
if (mii_phy_match(ma, makphys) != NULL)
|
|
return 10;
|
|
|
|
if (makphy_isi210(parent, ma))
|
|
return 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
makphyattach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct mii_softc *sc = device_private(self);
|
|
struct mii_attach_args *ma = aux;
|
|
struct mii_data *mii = ma->mii_data;
|
|
const struct mii_phydesc *mpd;
|
|
struct makphy_softc *maksc = (struct makphy_softc *)sc;
|
|
const char *name;
|
|
uint16_t reg, model;
|
|
int rv;
|
|
|
|
mpd = mii_phy_match(ma, makphys);
|
|
aprint_naive(": Media interface\n");
|
|
if (mpd)
|
|
name = mpd->mpd_name;
|
|
else if (makphy_isi210(parent, ma)) {
|
|
name = MII_STR_xxMARVELL_I210;
|
|
maksc->sc_flags |= MAKPHY_F_I210;
|
|
} else
|
|
panic("Unknown PHY");
|
|
aprint_normal(": %s, rev. %d\n", name, MII_REV(ma->mii_id2));
|
|
|
|
sc->mii_dev = self;
|
|
sc->mii_mpd_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
|
|
sc->mii_mpd_model = model = MII_MODEL(ma->mii_id2);
|
|
sc->mii_mpd_rev = MII_REV(ma->mii_id2);
|
|
sc->mii_inst = mii->mii_instance;
|
|
sc->mii_phy = ma->mii_phyno;
|
|
sc->mii_funcs = &makphy_funcs;
|
|
sc->mii_pdata = mii;
|
|
sc->mii_flags = ma->mii_flags;
|
|
|
|
mii_lock(mii);
|
|
|
|
switch (model) {
|
|
case MII_MODEL_xxMARVELL_E1000:
|
|
if ((maksc->sc_flags & MAKPHY_F_I210) != 0)
|
|
goto page0;
|
|
/* FALLTHROUGH */
|
|
case MII_MODEL_xxMARVELL_E1000_3:
|
|
case MII_MODEL_xxMARVELL_E1000S:
|
|
case MII_MODEL_xxMARVELL_E1000_5:
|
|
/* 88E1000 series has no EADR */
|
|
break;
|
|
default:
|
|
page0:
|
|
/* Make sure page 0 is selected. */
|
|
if (PHY_WRITE(sc, MAKPHY_EADR, 0) != 0)
|
|
aprint_verbose_dev(self,
|
|
"Failed to access EADR. Are you an emulator?\n");
|
|
break;
|
|
}
|
|
|
|
PHY_RESET(sc);
|
|
|
|
PHY_READ(sc, MII_BMSR, &sc->mii_capabilities);
|
|
sc->mii_capabilities &= ma->mii_capmask;
|
|
if (sc->mii_capabilities & BMSR_EXTSTAT) {
|
|
rv = PHY_READ(sc, MII_EXTSR, &sc->mii_extcapabilities);
|
|
if (rv != 0) {
|
|
aprint_verbose_dev(self, "Failed to read EXTSR. "
|
|
"Are you an emulator?. "
|
|
"Regard as 1000BASE-T.\n");
|
|
sc->mii_extcapabilities
|
|
|= EXTSR_1000TFDX | EXTSR_1000THDX;
|
|
|
|
/*
|
|
* Also assume it doesn't support PSSR_LINK bit.
|
|
* It's for QEMU.
|
|
*/
|
|
maksc->sc_flags |= MAKPHY_QUIRK_PSSR_LINK;
|
|
}
|
|
}
|
|
|
|
if (((sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX))
|
|
!= 0)
|
|
&& ((sc->mii_extcapabilities & (EXTSR_1000XFDX | EXTSR_1000XHDX))
|
|
!= 0)) {
|
|
bool fiberonly = false, copperonly = false;
|
|
|
|
/* Both copper and fiber are set. check MODE[] */
|
|
switch (sc->mii_mpd_model) {
|
|
case MII_MODEL_xxMARVELL_E1011:
|
|
case MII_MODEL_xxMARVELL_E1111:
|
|
/* These devices have ESSR register */
|
|
rv = PHY_READ(sc, MAKPHY_ESSR, ®);
|
|
if (rv != 0) {
|
|
/*
|
|
* XXX Emulator (e.g qemu) may not implement
|
|
* the ESSR register. If so, regard as copper
|
|
* media.
|
|
*/
|
|
copperonly = true;
|
|
aprint_verbose_dev(self, "Failed to access "
|
|
"ESSR. Are you an emulator? Regard as "
|
|
"copper only media.\n");
|
|
} else if ((reg & ESSR_AUTOSEL_DISABLE) != 0) {
|
|
switch (reg & ESSR_HWCFG_MODE) {
|
|
case ESSR_RTBI_FIBER:
|
|
case ESSR_RGMII_FIBER:
|
|
case ESSR_RGMII_SGMII: /* right? */
|
|
case ESSR_TBI_FIBER:
|
|
case ESSR_GMII_FIBER:
|
|
fiberonly = true;
|
|
break;
|
|
case ESSR_SGMII_WC_COPPER:
|
|
case ESSR_SGMII_WOC_COPPER:
|
|
case ESSR_RTBI_COPPER:
|
|
case ESSR_RGMII_COPPER:
|
|
case ESSR_GMII_COPPER:
|
|
copperonly = true;
|
|
default:
|
|
break;
|
|
}
|
|
} else
|
|
maksc->sc_flags |= MAKPHY_F_FICO_AUTOSEL;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (fiberonly || copperonly)
|
|
aprint_debug_dev(self, "both copper and fiber are set "
|
|
"but MODE[] is %s only.\n",
|
|
fiberonly ? "fiber" : "copper");
|
|
if (fiberonly)
|
|
sc->mii_extcapabilities
|
|
&= ~(EXTSR_1000TFDX | EXTSR_1000THDX);
|
|
else if (copperonly) {
|
|
sc->mii_extcapabilities
|
|
&= ~(EXTSR_1000XFDX | EXTSR_1000XHDX);
|
|
sc->mii_flags &= ~MIIF_IS_1000X;
|
|
}
|
|
}
|
|
mii_unlock(mii);
|
|
mii_phy_add_media(sc);
|
|
}
|
|
|
|
static void
|
|
makphy_reset(struct mii_softc *sc)
|
|
{
|
|
struct makphy_softc *maksc = (struct makphy_softc *)sc;
|
|
uint16_t reg;
|
|
|
|
KASSERT(mii_locked(sc->mii_pdata));
|
|
|
|
mii_phy_reset(sc);
|
|
|
|
/* Initialize PHY Specific Control Register. */
|
|
PHY_READ(sc, MAKPHY_PSCR, ®);
|
|
|
|
/* Assert CRS on transmit. */
|
|
switch (sc->mii_mpd_model) {
|
|
case MII_MODEL_MARVELL_E1000_0:
|
|
if ((maksc->sc_flags & MAKPHY_F_I210) != 0)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case MII_MODEL_MARVELL_E1000_3:
|
|
case MII_MODEL_MARVELL_E1000_5:
|
|
case MII_MODEL_MARVELL_E1000_6:
|
|
case MII_MODEL_xxMARVELL_E1000S:
|
|
case MII_MODEL_xxMARVELL_E1011:
|
|
case MII_MODEL_xxMARVELL_E1111:
|
|
reg |= PSCR_CRS_ON_TX;
|
|
break;
|
|
default: /* No PSCR_CRS_ON_TX bit */
|
|
break;
|
|
}
|
|
|
|
/* Enable scrambler if necessary. */
|
|
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E3016)
|
|
reg &= ~E3016_PSCR_SCRAMBLE_DIS;
|
|
|
|
/*
|
|
* Store next page in the Link Partner Next Page register for
|
|
* compatibility with 802.3ab.
|
|
*/
|
|
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E3016)
|
|
reg |= E3016_PSCR_REG8NXTPG;
|
|
|
|
PHY_WRITE(sc, MAKPHY_PSCR, reg);
|
|
|
|
/* Configure LEDs if they were left unconfigured. */
|
|
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E3016) {
|
|
PHY_READ(sc, 0x16, ®);
|
|
if (reg == 0) {
|
|
reg = (0x0b << 8) | (0x05 << 4) | 0x04; /* XXX */
|
|
PHY_WRITE(sc, 0x16, reg);
|
|
}
|
|
}
|
|
|
|
mii_phy_reset(sc);
|
|
}
|
|
|
|
static void
|
|
makphy_pdown(struct mii_softc *sc, bool pdown)
|
|
{
|
|
uint16_t bmcr, new;
|
|
bool need_reset = false;
|
|
|
|
/*
|
|
* XXX
|
|
* PSCR (register 16) should be modified on some chips.
|
|
*/
|
|
|
|
PHY_READ(sc, MII_BMCR, &bmcr);
|
|
if (pdown)
|
|
new = bmcr | BMCR_PDOWN;
|
|
else
|
|
new = bmcr & ~BMCR_PDOWN;
|
|
if (bmcr != new)
|
|
need_reset = true;
|
|
|
|
if (need_reset)
|
|
new |= BMCR_RESET;
|
|
PHY_WRITE(sc, MII_BMCR, new);
|
|
}
|
|
|
|
static int
|
|
makphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
uint16_t bmcr;
|
|
|
|
if (!device_is_active(sc->mii_dev))
|
|
return ENXIO;
|
|
|
|
KASSERT(mii_locked(mii));
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
/* If we're not polling our PHY instance, just return. */
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return 0;
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the media indicates a different PHY instance,
|
|
* isolate ourselves.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
|
|
PHY_READ(sc, MII_BMCR, &bmcr);
|
|
PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO);
|
|
return 0;
|
|
}
|
|
|
|
/* If the interface is not up, don't do anything. */
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
break;
|
|
|
|
/* Try to power up the PHY in case it's down */
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_NONE)
|
|
makphy_pdown(sc, MAKARG_PUP);
|
|
|
|
mii_phy_setmedia(sc);
|
|
|
|
/*
|
|
* If autonegotiation is not enabled, we need a
|
|
* software reset for the settings to take effect.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) == IFM_NONE)
|
|
makphy_pdown(sc, MAKARG_PDOWN);
|
|
else if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
|
|
PHY_READ(sc, MII_BMCR, &bmcr);
|
|
PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_RESET);
|
|
}
|
|
break;
|
|
|
|
case MII_TICK:
|
|
/* If we're not currently selected, just return. */
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return 0;
|
|
|
|
if (mii_phy_tick(sc) == EJUSTRETURN)
|
|
return 0;
|
|
break;
|
|
|
|
case MII_DOWN:
|
|
mii_phy_down(sc);
|
|
return 0;
|
|
}
|
|
|
|
/* Update the media status. */
|
|
mii_phy_status(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
makphy_status(struct mii_softc *sc)
|
|
{
|
|
struct makphy_softc *maksc = (struct makphy_softc *)sc;
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
uint16_t bmcr, gsr, pssr, essr;
|
|
|
|
KASSERT(mii_locked(mii));
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
PHY_READ(sc, MII_BMCR, &bmcr);
|
|
/* XXX FIXME: Use different page for Fiber on newer chips */
|
|
PHY_READ(sc, MAKPHY_PSSR, &pssr);
|
|
|
|
if ((maksc->sc_flags & MAKPHY_QUIRK_PSSR_LINK) != 0) {
|
|
uint16_t bmsr;
|
|
|
|
/*
|
|
* QEMU e1000 driver has the PSSR register but it doesn't
|
|
* support the PSSR_LINK bit well. It always returns 1.
|
|
* To avoid this problem, use the BMSR_LINK bit. It's not
|
|
* required to read it twice as real device because it's not
|
|
* latched.
|
|
*/
|
|
PHY_READ(sc, MII_BMSR, &bmsr);
|
|
if (bmsr & BMSR_LINK)
|
|
pssr |= MAKPHY_PSSR_LINK;
|
|
else
|
|
pssr &= ~MAKPHY_PSSR_LINK;
|
|
}
|
|
|
|
if (pssr & MAKPHY_PSSR_LINK)
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
if (bmcr & BMCR_LOOP)
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
if (bmcr & (BMCR_ISO | BMCR_PDOWN)) {
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
if ((bmcr & BMCR_AUTOEN) != 0) {
|
|
/*
|
|
* Check Speed and Duplex Resolved bit.
|
|
* Note that this bit is always 1 when autonego is not enabled.
|
|
*/
|
|
if (!(pssr & MAKPHY_PSSR_RESOLVED)) {
|
|
/* Erg, still trying, I guess... */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
} else {
|
|
if ((pssr & MAKPHY_PSSR_LINK) == 0) {
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* XXX The following code support Fiber/Copper auto select mode
|
|
* only for 88E1011, 88E1111 and 88E1112. For other chips, the document
|
|
* is required.
|
|
*/
|
|
if (sc->mii_flags & MIIF_IS_1000X) {
|
|
/* Not in Fiber/Copper auto select mode */
|
|
mii->mii_media_active |= IFM_1000_SX;
|
|
} else if ((sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1011) ||
|
|
(sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1111)) {
|
|
if ((maksc->sc_flags & MAKPHY_F_FICO_AUTOSEL) != 0) {
|
|
/* Fiber/Copper auto select mode */
|
|
PHY_READ(sc, MAKPHY_ESSR, &essr);
|
|
if ((essr & ESSR_FIBER_LINK) == 0)
|
|
goto copper;
|
|
else {
|
|
/* Regard as 1000BASE-SX */
|
|
mii->mii_media_active |= IFM_1000_SX;
|
|
}
|
|
} else
|
|
goto copper;
|
|
} else if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1112) {
|
|
/* Fiber/Copper auto select mode */
|
|
|
|
PHY_READ(sc, MAKPHY_PSSR, &pssr);
|
|
if ((pssr & MAKPHY_PSSR_RESOLUTION_FIBER) == 0)
|
|
goto copper;
|
|
|
|
switch (MAKPHY_PSSR_SPEED_get(pssr)) {
|
|
case SPEED_1000:
|
|
mii->mii_media_active |= IFM_1000_SX;
|
|
break;
|
|
case SPEED_100:
|
|
mii->mii_media_active |= IFM_100_FX;
|
|
break;
|
|
default: /* Undefined (reserved) value */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
mii->mii_media_status = 0;
|
|
return;
|
|
}
|
|
} else {
|
|
copper:
|
|
switch (MAKPHY_PSSR_SPEED_get(pssr)) {
|
|
case SPEED_1000:
|
|
mii->mii_media_active |= IFM_1000_T;
|
|
break;
|
|
case SPEED_100:
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
break;
|
|
case SPEED_10:
|
|
mii->mii_media_active |= IFM_10_T;
|
|
break;
|
|
default: /* Undefined (reserved) value */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
mii->mii_media_status = 0;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (pssr & MAKPHY_PSSR_DUPLEX)
|
|
mii->mii_media_active |= mii_phy_flowstatus(sc) | IFM_FDX;
|
|
else
|
|
mii->mii_media_active |= IFM_HDX;
|
|
|
|
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
|
|
PHY_READ(sc, MII_100T2SR, &gsr);
|
|
if (gsr & GTSR_MS_RES)
|
|
mii->mii_media_active |= IFM_ETH_MASTER;
|
|
}
|
|
}
|