Use the bootpath[] array in setroot() to determine partition info in case
of boot devices of type DV_DISK. Also, precook more SCSI device info in
fake_bootpath() to simplify dk_establish().
in favour of storing the device pointer in the bootpath[] element corresponding
to the boot device. This also allows the opportunity to get to "intermediate"
devices (e.g. busses) should the need for this ever arise.
Call prom_iopen only on the first disk_open call, otherwise
only the first file open attempt ever works. Fixes PR# 1726
Both from der Mouse <mouse@Collatz.McRCIM.McGill.EDU>
Add prototypes to (most of) src/sys/arch/pmax/pmax. (The un-protytyped
parts still have pending merges with the Pica port.)
Fix splx() glitches in pmax/clock.c.
Delete old cpu/fpu identification from pmax/autoconf.c, use r4400/r4600/idt
aware code from Pica port, now in mips/mips/mips_machdep.c.
Delete unused multi-CPU autoconfiguration code; NetBSD/pmax does not
support decsystem 5800s anyway.
Update the pmax SCSI drivers (rz and tz) to use <machine/conf.h>.
Fix the driver entry points to have the correct signatures -- add
"ioflag" args to read() and write(), add "struct proc *p" arg to
open and close.
Stop using __BDEVSW_DUMP_OLD_TYPE, and update the rzdump and tzdump
entry points to have the correct, MI signatures.
NB: this is just syntactic sugar: both the caller and the dump entry
points ignore the additional args, and do exactly what they did before.
This must be fixed before using dump entry points in non-pmax drivers
(e.g., the MI scsi code).
add prototyped declarations for the callbacks which add old-style
(4.4bsd/pmax conf.old) SCSI controllers, and which configure SCSI slaves
on such controllers.
rewriting the SII driver to work with the MI scsi would be a better option,
if time were available, and the MI scsi code supported SCSI controllers with
an 8k upper bound on transfers.
the bus is configured, interrupts are handled, etc. define
eisa_chipset_tag_t and eisa_intr_handle_t types, and the following
functions:
eisa_attach_hook()
eisa_maxslots()
eisa_intr_map()
eisa_intr_string()
eisa_intr_establish()
eisa_intr_disestablish()
to do the right things for the i386.
Replace impliclty-sized types (u_long, u_short) used in
declarations of byteorder functions witho explicitly sized types
(u_int32_t, u_int16_t).
Avoids problems with using ntohl(foo) as (eg) an argument to printf().
Do not define __BDEVSW_DUMP_OLD_TYPE, as it breaks prototyping
of device dump functions, and should be port-dependent in any case.
The pmax 4.4bsd/pmax-derived drivers are being fixed, and the pica port
uses the MI scsi drivers already.
Add prototyped declarations for scsiGroup0Cmd and scsiGroup1Cmd.
Add prototype declarations for scsiPrintSense. Cut the inqiury-response
pretty-printer from tz.c and rz.c and paste it in as scsiPrintInquiry.
-Wall -Wmissing-prototypes:
Add prototypes.
Fix printf() format strings (%x vs pointer-arg, %x with a long int).
Fix a possibly-uninitialized shadowing local variable "resid" in tzdone().
include <sys/systm.h> to get prototypes for printf() and bcopy().
Move to mips/pmax/genassym.c, as (most of) the assembler locore code is
being merged into a generic-MIPS locore.
Remove the redundant pmax/pmax/genassym.c.
was never getting attached on a sun4 machine. Fix this so that the
cache and FPU get enabled on sun4 machines. (Believe me, a 4/260 is
slot enough, *with* the cache...)
or so claims the comment in trap.c). Reinstate the code that
treats trap 2 as "trace" which is given special handling in
trap.c for SunOS binaries. Also add some comments about this.
Thanks to <Ian.Dall@dsto.defence.gov.au> for this one.
config lines for obio0 devices without addresses (thus cf->cf_loc[0] took
the default value of -1). we now ignore these entries on a sun4 since
they could never be valid (eliminates a 'panic:alignment' fault at bootup).
config lines for obio0 devices without addresses (thus cf->cf_loc[0] took
the default value of -1). this caused autoconf.c to map memreg0 to
obio physical address -1 (invalid). as soon as we took a memory fault
the code in memfault_sun4 [locore] would get a Watchdog timeout when trying to
read memreg0 (a.k.a. par_err_reg).
Amiga partition block. Print a diagnostic if the sectors/track or
number of heads differs from the RDSK values.
Fix sorting by partition offset (don't drop last partition).
Save filesystem blocksize for adosfs partitions. (Closes PR 2232)
