nathanw
1a4f33e2db
Move _initialize_corelow() back to before _initialize_nbsd_thread() so that
...
threaded core debugging is enabled.
2003-12-01 17:54:41 +00:00
simonb
9c8a6768e6
Revert 2.14 mknative (with expanded local paths!) while we're forced at
...
2.13.2.1; needed to get clean -current building again.
2003-11-28 05:16:19 +00:00
simonb
d95b3733ab
Revert part of binutils 2.14 framework; needed to get clean -current
...
building again.
2003-11-28 05:14:18 +00:00
mrg
d409bb8e80
framework to build binutils 2.14. note lib{bfd,opcodes,iberty} framework
...
is moving here, keeping everything together.
tested with: vax (old config), mac68k (old config), i386 (new config)
and shark (new config). tested i386 binaries only so far, but the
system seems to be surviving the self-hosted test.
XXX: note that this isn't *all* the bits required to run a binutils
2.14 world for arm or i386; these will come soon enough...
2003-11-27 15:02:21 +00:00
mrg
d2f6146b45
find libraries etc in a binutils 2.14 world.
2003-11-27 14:36:45 +00:00
mrg
65e91005fa
don't build libopcodes/bfd/iberty here if we have binutils 2.14
2003-11-27 13:53:11 +00:00
mrg
eb9e243e98
include "getopt.h" as we refer to struct option.
2003-11-27 13:52:30 +00:00
mrg
e47eb0663b
backout most of the previous; it is no longer necessary.
2003-11-27 10:54:17 +00:00
mrg
8533021b27
gdb 5.0 is gone.
2003-11-27 10:52:02 +00:00
mrg
3a3b2d3c50
delete GDB 5.0. it is no longer used by supported platforms (sorry pc532 :-)
2003-11-27 10:32:25 +00:00
mrg
7764cab06d
merge the non-aout-shlib changes forward from gnu/dist/toolchain.
2003-11-27 09:45:33 +00:00
mrg
f8f47744d8
disable rules that modify the source tree.
2003-11-27 09:40:38 +00:00
mrg
ebf56cd11f
re-add binutils 2.14 files.
2003-11-26 12:29:43 +00:00
mrg
1a898f987d
initial import of binutils 2.14 into gnu/dist/binutils.
2003-11-26 11:33:51 +00:00
mrg
2e50f8ac41
initial import of binutils 2.14 into gnu/dist/binutils.
2003-11-26 11:31:11 +00:00
uwe
633913b2b3
Add ifdefed inits for TUI and if 0'ed _initialize_nbsd_thread (not yet).
2003-11-24 01:59:59 +00:00
uwe
c9a82b254b
DEFAULT_BFD_VEC should be little endian bfd_elf32_shlnbsd_vec.
2003-11-24 01:58:22 +00:00
uwe
10ff81335f
Set ENTRY=__start to be consistent with other ELF ports. The produced
...
binaries are the same, as we provide both _start and __start symbols
for the entry point in crt0.
PR#22073 by Izumi Tsutsui.
Ok by Matthew Green <mrg@netbsd>.
2003-11-23 13:54:11 +00:00
nathanw
d8637f542a
Use $(build_exeext) in both the source and destination, like the other
...
rules.
2003-11-20 18:43:58 +00:00
nathanw
0dcab12a43
Add a missing $(build_exeext)
2003-11-19 23:45:25 +00:00
lukem
b7b564a26d
add fini.lo to CLEANFILES
2003-11-16 22:49:48 +00:00
lukem
263786182a
support MAKEVERBOSE
2003-11-16 16:29:04 +00:00
lukem
59c9b264d0
Use .lo for host tool objects.
...
Use CPPFLAGS.file correctly (CPPFLAGS.foo.c _not_ CPPFLAGS.foo.o !)
Support MAKEVERBOSE.
Be consistent about make(1) variable use.
2003-11-16 16:24:48 +00:00
matt
4e90dd053f
Add kcore and netbsd thread support.
2003-11-14 19:10:00 +00:00
matt
8056b67d49
Add kcore & netbsd thread support
2003-11-14 19:08:49 +00:00
briggs
5e0fd052da
Fix from Ian Lance Taylor to allow building a cross-gdb with arm--netbsdelf
...
target. Patch as seen on tech-toolchain@.
2003-11-14 15:06:15 +00:00
dbj
be929a0a55
update to most recent versions
2003-11-13 03:06:40 +00:00
martin
4b0b317837
Remove unused variables.
2003-11-11 16:28:59 +00:00
martin
6354cf63d2
Fix register offset calculations. From Christian Limpach.
2003-11-11 16:24:23 +00:00
scw
9bf3f153c5
Apply a patch from Richard Earnshaw which fixes a half-word load/store
...
codegen bug on armeb.
2003-11-11 12:04:13 +00:00
matt
8c60671ca9
Add thread support.
2003-11-10 21:59:58 +00:00
matt
0ef98a7702
Make version 5.3nb1
2003-11-10 21:49:14 +00:00
matt
e2bf0dc236
Enable nbsd-thread.
...
Make version 5.3nb1.
2003-11-10 21:48:48 +00:00
mrg
0bcb648614
set the arm breakpoint depending on the byte order. now armeb gdb works.
2003-11-09 02:52:07 +00:00
ragge
587d7055bd
Set optimizing to -O0 for vax (was -O1 before), otherwise awk
...
gets internal errors when used.
2003-11-08 17:17:59 +00:00
mrg
b6f7d4362f
default armeb*netbsd* to ARM_FLAG_BIG_END
2003-11-08 06:57:26 +00:00
uwe
af9cced758
The "pref @rN" instruction was introduced in sh3, not sh4, so correct
...
its sh_opcode_info entry accordingly.
2003-11-07 14:43:18 +00:00
mrg
57ddb40e82
be sure to default to bfd_elf32_bigarm_vec not bfd_elf32_littlearm_vec
2003-11-07 07:31:44 +00:00
mrg
68002eaa4a
build ra-colorize.c with -O0 until the bug that causes it to have dozens
...
of undefined references to local symbols is fixed.
2003-11-05 00:05:48 +00:00
hannken
83bd54e877
Add "target kcore" to gdb53/sparc64.
...
Taken verbatim from the old gdb in src/gnu/dist/toolchain/gdb.
Approved by: Christos Zoulas <christos@netbsd.org>
2003-11-04 19:33:39 +00:00
scw
437384a077
Regen for TARGET_ENDIAN_DEFAULT=ARM_FLAG_BIG_END fix in config.gcc.
2003-11-04 14:46:59 +00:00
scw
2a38410f5e
Need to add TARGET_ENDIAN_DEFAULT=ARM_FLAG_BIG_END to tm_defines if
...
configuring for armeb.
2003-11-04 14:45:16 +00:00
wiz
9678ca7caa
Install grohtml(1).
2003-11-03 17:05:28 +00:00
skrll
c1946cebd4
Index fpregsetp->fpr correctly.
2003-11-03 15:59:11 +00:00
ragge
3a99ca5371
Set USER_LABEL_PREFIX to "", otherwise native compilation of some GNU
...
utilities (like texinfo) fails.
2003-11-03 10:07:34 +00:00
hannken
3f72313b8e
Add "target kcore" to gdb53/sparc.
...
Taken verbatim from the old gdb in src/gnu/dist/toolchain/gdb.
Approved by: Christos Zoulas <zoulas@netbsd.org>
2003-11-02 20:59:28 +00:00
uwe
1d729d7bc4
First cut at implementing software single stepping for sh3. We need
...
it because sh3 ports don't provide PT_STEP. It is finally possible to
run programs under gdb now, though there are still issues to be
resolved. It was deemed useful enough to commit early, while the work
is still in progress. Tested on hpcsh.
Blessed by christos@.
2003-10-31 00:11:27 +00:00
mycroft
b9c785bd44
As seen on tech-toolchain:
...
So the problem is thus:
* The {u,}mulsidi3 generate two parallel sets which modify the upper and lower
halves of the target register.
* life_analysis() does not track subregister modifications -- if you don't
modify the whole register with a single set, it considers the register
unused.
The simple, if klugy, solution to this is to stick an explicit clobber in. It
seems to work.
While doing this, I noticed that constant folding was not happening for
32x32->64 multiplies. This is because the parallel set generated by
{u,}mulsidi3 cannot be folded at all. To solve this, I first expand to a
normal multiply, and then use a define_insn_and_split to convert it to the
parallel set after CSE and constant folding.
This patch has also been submitted to GCC bugzilla, but who knows if I'll get
a reply to that.
2003-10-29 21:25:03 +00:00
matt
f22eb2930b
From gcc-patches:
...
* real.c (encode_ieee_single): Ensure proper promotion.
Back out change to i386.c
2003-10-28 19:08:12 +00:00
mrg
00b48119d0
XXX: build mdsetimage.c / installboot/ffs.c with -O0 on sun2 as GCC3
...
barfs on these for now.
2003-10-28 08:21:26 +00:00