aee9bb5b5f
IPv6CP support. if IPv6 link-local address is configured to the interface,
...
the interface tries to negotiate ifid with the other end by using IPv6CP.
other changes:
- do not share ppp sequence number across protocols.
- if LCP proto-rej is received, drop the protocol mentioned by the message.
this is to be friendly with non-IPv6 peer (if the peer complains due to
lack of IPv6CP, drop IPv6CP). this basically implements "RXJ+" state
transition in the RFC.
- cleanup debugging message. always print blank just before message.
CAVEAT:
- if the peer uses the same MAC address as our side (pretty unlikely)
the code may go into req-rej loop.
- even though we negotiate ifid, we don't configure destination address
onto the interface. it is not really necessary to do so (IMHO).
- I've tested this code on a NetBSD 1.4.2 node, which was with fair amount
of modifications. not sure if the committed code does it right... (please
test and send reports)
2000-05-02 12:43:16 +00:00
2ced82ab8e
Add the (void)&acc; hack from strtouq.c to strtoull.c. This works around
...
an arm32 compiler bug. Change the comment in strtouq.c to reflect the current
usage of the hack.
2000-05-02 12:39:03 +00:00
dc5fae5847
Don't build libntp anymore.
2000-05-02 12:22:23 +00:00
e5150c9868
Out with the old, in with the new.
2000-05-02 12:19:20 +00:00
dd4d1cfbc2
Change xntpd to ntpd.
2000-05-02 12:17:28 +00:00
dfbbad05df
Use "ntpd.pid" for pid file, change other xntp references to ntp.
2000-05-02 12:16:07 +00:00
8632dc5bb6
Add ntp, remove xntp.
2000-05-02 12:14:40 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
1bf404af94
Install html doco under HTMLDOCDIR/ntp.
2000-05-02 12:01:10 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
d81e26a851
Note rtk and com attachment at cardbus.
2000-05-02 11:54:15 +00:00
f5e35141a6
Remove the never populated /usr/share/doc/xntp, and add /usr/share/doc/html
...
and the ntp4 subdirectories under that.
2000-05-02 11:49:16 +00:00
b155979066
Add HTMLDOCDIR pointing to /usr/share/doc/html.
2000-05-02 11:44:20 +00:00
22ffe6a4de
Add mainbus(4).
2000-05-02 11:43:23 +00:00
c279885e45
Add a very short man page for mainbus (following my philosophy that
...
every device in the config file should have a man page).
2000-05-02 11:42:06 +00:00
c528cb8edd
NetBSD - because Unix isn't just #include <linux.h>, i386, ELF, ...!
2000-05-02 11:41:24 +00:00
062a7e5eb4
Xref pnpbios(4).
2000-05-02 11:11:39 +00:00
f788a32437
Add line for cms attach.
2000-05-02 11:05:27 +00:00
9f9f06401c
Add (commented out) cms(4) driver.
2000-05-02 11:00:56 +00:00
d46e0d77c0
Remove unused code: getptesw4m(),setptesw4m()
2000-05-02 10:35:06 +00:00
716a862d08
Lock internals have changed, and we depend on those in here.
2000-05-02 09:29:39 +00:00
40ca86f953
Make audio devices.
2000-05-02 08:17:51 +00:00
8abcd395fd
Add bba(4) attachment.
2000-05-02 08:04:24 +00:00
e15d2472fa
Fix typo.
2000-05-02 08:03:53 +00:00
2e87728bd8
Restructure a bit as to create wscons device nodes using the 'wscons'
...
argument, rather than enumerating all the terminal devices. (Convenient
side-effect: ttyEcfg ist actually created.)
2000-05-02 08:03:38 +00:00
087a67c892
Add proper bba attachment. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-02 08:02:07 +00:00
f4284215b0
Update bba(4) man page and xref it.
2000-05-02 08:00:00 +00:00
c6df4d8830
Comment out bba since I don't really know if it's right.
2000-05-02 07:23:56 +00:00
05ef4c3d35
Add bba(4) attachment at tc.
2000-05-02 07:22:26 +00:00
08e476f3c5
Add bba(4) man page.
2000-05-02 07:17:20 +00:00
952a141de5
use KERNOBJDIR from bsd.kernobj.mk
2000-05-02 07:10:19 +00:00
8124e16d8e
use ../../Makefile.inc
2000-05-02 06:47:23 +00:00
49cf26c7de
Use top-level Makefile.inc to set BSDSRCDIR
...
use bsd.kernobj.mk to set KERNOBJDIR and pass this to runlist.sh
2000-05-02 06:45:24 +00:00
621ef4d785
Add am7930 audio driver.
2000-05-02 06:43:05 +00:00
734bcf16ec
Use bsd.kernobj.mk
...
Also if KERNELS_DONE is defined skip building kernels. Handy if re-spinning
due to errors in distrib later on.
2000-05-02 06:41:44 +00:00
361f2141f7
Adapt to new am7930 driver. PR 10033 from Gregory McGarry.
2000-05-02 06:35:12 +00:00
f9dbbf4c92
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 06:30:49 +00:00
39f8e55cfc
On the m68k, the most efficient type for __cpu_simple_lock_t is
...
an unsigned char, since that is what the `tas' instruction uses.
While I'm here, implement the __cpu_simple_lock family of routines.
Why? One, because they're easy. Two, so Steve can get master/slave
MVME systems talking across the backplane. :-)
2000-05-02 05:17:45 +00:00
6f2260a0ca
Added bsd.kernobj.mk
2000-05-02 04:52:16 +00:00
855b79db92
Let each platform typedef the new __cpu_simple_lock_t, which should
...
be the most efficient type used for the atomic operations in the
simplelock structure, and should also be __volatile.
2000-05-02 04:41:04 +00:00
8185691694
- If a platform defines __HAVE_ATOMIC_OPERATIONS, use them for counting
...
in the MULTIPROCESSOR case.
- Move a misplaced #ifdef so that LK_REENABLE actually works.
2000-05-02 04:32:33 +00:00
e37f1e2284
specification (specifically, 6to4-04) forbids use of private
...
IPv4 address in 6to4 prefix.
2000-05-02 04:05:25 +00:00
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
acc4f5dd41
Set variables to mark the absolute and realative paths to the top of
...
the src tree. Default BSDSRCDIR to ABSTOP.
2000-05-02 03:47:19 +00:00
44f0af2b1f
Allow optimizer/debug flags to be changed on command line without
...
breaking everything. Eg. use DBG="-O0 -g" when debugging something.
2000-05-02 03:44:36 +00:00
a434bb7045
Added bsd.kernobj.mk to centralize the magic for the location
...
of kernel configs and compiles. Relies on BSDSRCDIR being set
which is now handled by src/Makefile.inc if need be.
2000-05-02 03:43:15 +00:00
712326ecbd
Traditionally, the floppy controller was configured at 0x3f0 for 8 ports,
...
but the registers actually begin at 0x3f2, and this is what PNPBIOS reports
for the floppy controller resources. Adjust the register offsets and the
mapping of them for the ISA front-end to compensate, so that the PNPBIOS
attachment of the floppy controller actually works.
2000-05-02 03:33:45 +00:00
5e915fcab9
Nuke some dead code.
2000-05-02 03:32:09 +00:00
658f83f55c
/etc/postfix/postfix-script is a config file.
...
Only install it as part of "make distribution".
Change committed on behalf of perry.
2000-05-02 03:03:21 +00:00
d2fbbe8204
Install postfix-script into /etc/postfix for the /etc set.
2000-05-02 02:36:20 +00:00
itojun