d318abdbc4
prototypes for ccd audio and ncr5380
1996-03-07 15:00:07 +00:00
97fbc0015b
Add bit definition for auto-initialize mode.
1996-03-01 22:27:09 +00:00
950eda2d54
Replace DEBUG with NCR5380_DEBUG and do not define it by default.
1996-03-01 01:42:04 +00:00
92d99153a3
Kill two mis-matched and unnecessary declarations.
1996-02-28 01:44:17 +00:00
4005c5fd09
Fix typo (PR 2123, from Michael VanLoon)
1996-02-26 22:48:32 +00:00
5a1e1bb682
don't need isa/isareg.h or pci/pci{reg,var}.h.
1996-02-25 22:56:30 +00:00
3d182fe265
Use CPU-type macros
1996-02-25 21:53:49 +00:00
012b23ca17
fix a trace message
1996-02-22 04:06:03 +00:00
a19a024e59
Do not mark target/LUN busy until we commit to working with it,
...
after the check for reselections. (From Matthias Pfaller, PR 2105)
Also improve the selection code WRT concurrent reselection.
1996-02-22 03:10:47 +00:00
a35f0ac985
Add more debugging code.
1996-02-20 12:13:09 +00:00
5021ab87f1
Update copyright notice.
1996-02-19 15:23:25 +00:00
5bc567b0d3
Set IER_ETXRDY before outputting any bytes, to prevent race condition.
1996-02-19 15:09:25 +00:00
c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
b9de283ae6
Fix typo; pointed out by jtk.
1996-02-19 10:30:09 +00:00
e9d6e59c62
Fix two bugs found by Bill Studenmund:
...
Driver can not use tp->t_sc for its own purposes
Attach should take the unit number from _dev.dv_unit
1996-02-19 04:34:01 +00:00
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
9cbadb3ec2
Remove incorrect comment. From Mike Long, PR 1277.
1996-02-16 08:12:33 +00:00
ee08b72ef4
Hayes ESP register definition
1996-02-10 20:23:40 +00:00
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
30c34c327f
vnd.c: Typo (disk_deta{t,}ch) It was detach in the header file and
...
detatch everywhere else. Reverted to the english spelling.
Also fixed the rest of the prototype warnings while I was at it.
ic/ncr5380sbc.c: Don't declare Debugger()... I have to clean this
everywhere :-(
1996-02-10 00:11:44 +00:00
54c51d4393
Document this file better, mostly from John Vinopal
...
<banshee@gabriella.resort.com>. Closes PR #1864 .
1996-02-05 23:01:50 +00:00
3ae2aedf4d
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
240e22087c
Received copyright assignment
1996-02-05 00:10:32 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
c2c1c1b11a
Move struct definitions to MD code.
1996-01-24 19:21:40 +00:00
ca633a9f35
Reorganized, machine-independent z8530 driver, based on the sparc/sun3 zs.
...
Uses autoconfig to attach keyboard, mouse, or tty. (See z8530.doc)
1996-01-24 01:07:21 +00:00
5886eb474f
Use the function pointers sc_pio_in, sc_pio_out to call the PIO functions
...
for transfers in data phase so those functions may be MD implementations
that do "pseudo-DMA" if desired. Also correct some comments.
1996-01-23 19:47:00 +00:00
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
efb493a4e0
Back out the rint/tint hook stuff, and remove need to LEINTR_UNIT. The
...
hp300 was the last to use it.
1996-01-02 21:51:56 +00:00
1bd3fee124
Switch to David Jones' new machine-independent NCR5380 driver. It's been
...
in use by the sun3 port for some time, and is now used by the sparc port.
1996-01-01 22:24:30 +00:00
0df0df026b
Add hooks at the top of the tint and rint functions, conditionally called
...
if the CPP symbols LE_TINT_HOOK and LE_RINT_HOOK are defined, respectively.
The hooks are called by jumping though the sc_tint_hook and sc_rint_hook
members of the softc, and take the softc as an argument. Only ports which
need these hooks need to declare them in the softc.
1995-12-30 20:59:17 +00:00
fd9084650c
make changed from pr#1824 from Ignatios Souvatzis
1995-12-27 07:51:40 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
69d57286dc
merge latest Thomas version with our minimal changes
1995-12-23 06:22:46 +00:00
7bb08a12f6
Make lewatchdog() take an int, not a short.
1995-12-11 19:48:53 +00:00
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
d51f726204
Fix typo, and eliminate some unneeded local variables.
1995-12-11 02:30:44 +00:00
333f2e0065
Make several informational messages #ifdef LEDEBUG.
1995-12-11 02:21:56 +00:00
77fce9fe33
Change format of probe messages slightly.
...
Add work-around for LANCE rev. C bug, iff LANCE_REVC_BUG is defined.
1995-12-10 08:55:07 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
2f9169d20b
Correct NE7CMD_FORMAT command (from John Kohl; PR#1637).
1995-10-20 00:02:20 +00:00
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
78bd894529
add prototypes for isr stuff fixes pr# 1284 and 1569
1995-10-09 15:19:58 +00:00
3973aeb080
fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de>
1995-10-09 14:05:24 +00:00
b216bead49
Add an Adaptec 2940 driver, by John Aycock and Justin Gibbs, ported to NetBSD by Stefan
...
Grefen, with several bug fixes by me.
1995-10-09 09:49:30 +00:00
christos