based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
that the page being zero'd was not completed and that page zeroing
should be aborted. This may be used by machine-dependent code doing
slow page access to reduce the latency of running a process that has
become runnable while in the middle of doing a slow page zero.
- Don't fall into infinite loop even if the # of iteration necessary isn't 1.
- Don't interpret lower 8bit of AL, which is # of iteration, as a descriptor.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
and large page support. This version is a bit more intelligent about
how it deals with kernel text pages.
Now that this is fixed, don't map the kernel text read-write if
DDB is configured.
- Return FALSE if the PTE does not have PG_V set (previously, you would
get always get true of the PDE was valid, even if the PTE was not).
- Teach it about 4MB pages.
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it). Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.
Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
need to access this when we have the proclist locked for reading,
and thus cannot store it in the PCB (which may be swapped out).
As part of this, call pmap_activate() from cpu_switch() to switch
to the new address space, and refresh the PCB's copy of the LDT
selector from the pmap structure (see above paragraph). We need
to do this for MP support anyhow.
Fixes a "panic: spinlock_switchcheck: CPU 0 has 1 spin locks" via
gdt_compact() reported by Nathan Williams.
so that special setup functions needed for some CPUs will be run before
some things (like UVM) are inited.
Add vm_page_zero_enable = FALSE to the cyrix 6x86 case, as page zeroing
while idle causes problems.
while suspended. When waking up the power hooks are again called at
splhigh() and then the level is lowered.
This prevents interrupts from reaching a device before the power hook
has reinitialized it.
Under this option, if only one IRQ is available for the link,
we assumes that the IRQ is already connected, and configure
PCI Interrupt Configuration Register accordingly.
This is what Linux pcmcia-cs-3.1.19 does by default.
This fixes unconfigured pccbb interrupt problem of
Sharp Mebius MN-5500. It's interrupt router is ITExpress Inc. IT8330G.
(http://www.ite.com.tw/, vendor=0x1283, product=0x8330)
Problem reporeted by Kitagawa <sk@kiu.ac.jp> in
http://www.kaynet.or.jp/~kay/ml/netbsd-pcmcia/msg/msg00608.html
- MB_LEN_MAX is increased to 32.
- To ensure binary compatibility for old executables
under multibyte locale, versioned setlocale is added.
- __mb_len_cur definision is added in setlocale.c
and enable it in stdlib.h .
It is also important for multibyte locale stuffs,
but I just forgot.
Avoid interpreting the upper 32 bits of 64-bit BARs as a 32-bit BAR.
Otherwise, the code would assume that the value 0 was incorrect and either:
(a) [on bus 0] "fix up" the address to some nonzero value, thus placing
the decoded address range outside of 32-bit address space, or
(b) [elsewhere] completely disable the device.
The fact that this behaviour depends on the bus number of the device is
already XXX'd.
XXX: This will need revisiting if and when we ever want to handle a PCI bus
XXX: with more than 32 bits of address space on an i386.
The onboard Adaptec 7890 on my Dell Precision Workstation 410 works again.
- Use PCI_INTERRUPT_PIN_MAX and I386_PCI_INTERRUPT_LINE_NO_CONNECTION
instead of magic number.
the Following changes are
{Modified with,Approved by} UCHIYAMA Yasushi <uch@netbsd.org>:
- Do not touch a PIRQ router, if the PIRQ is already routed
by the BIOS, or no appropriate IRQ is found for the PIRQ.
The latter prevents a panic on the machine of Frank van der Linden.
- Do not modify a PCI Interrupt Configuration register,
if it is already set by the BIOS, even if it is inconsistent
with the PCI IRQ routing table provided by the BIOS.
(The PCI Interrupt Configuration register seems to be more reliable
than the PCI IRQ routing table.)
This is needed to prevent a incorrect header_fixup() caused
by the incorrect PIR table on a Panasonic Let's Note AL-N2T516J5.
Provide "options PCIBIOS_INTR_FIXUP_FORCE" to retain
previous behavior, i.e. believe the PCI IRQ routing table
and ignore the PCI Interrupt Configuration register.
Although I'm not sure this is really needed.
- Do not modify a PCI Interrupt Configuration register,
if appropriate IRQ is not found for the link.
- Move a pciintr_icu_getclink() call and a pciintr_icu_get_intr()
call from pciintr_link_fixup() to pciintr_link_alloc(),
and only allocate pciintr_link_map if those calls succeeded.
This reduces number of calls of pciintr_icu_getclink(),
and also avoid necessity to validate a clink value in
ICU's {get,set}_{intr,trigger}() functions.
The sanity checks are not removed yet, though.
- Fix uninitialized usage of variable `bitmap' on stage 3
of pciintr_link_fixup().
- Remove a member variable `old_irq' from struct pciintr_link_map.
- Always use 0x%02x for printf format of canonical link value.
- Use DIAGNOSTIC instead of PCIINTR_DEBUG for really weird situation.
to prevent a panic on a Panasonic Let's Note AL-N2T516J5.
- add several debug printf which can be enabled by FIRESTARDEBUG.
by UCHIYAMA Yasushi <uch@netbsd.org>
- use I386_PCI_INTERRUPT_LINE_NO_CONNECTION instead of magic number.
Add GENERIC rev in "from:" line to aid future merging.
Major highlights include COMPAT_14, COMPAT_AOUT, NTFS, OVERLAY,
SOFTDEP, INET6, IPSEC, pcic iosiz changes, cz, dpt, rtk (cardbus!),
awi, cnw, ray, wi, xi, joy, and gif.
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.
* put #includes of opt headers and headers to get protos used by
net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
netisr_dispatch.h (pc532) to use it.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
from devices connected to pckbc:
- Do actual sample collection in pckbc.
- Add rndsource_element_t to the slot data.
- Change pckbc_set_inputhandler() to take an additional argument,
the name of the device, which is (eventually) passed into
rnd_attach_source() to identify the source.
- Change callers of pckbc_set_inputhander() appropriately.
If __HAVE_CPU_TIMESTAMP is defined, <machine/rnd.h> exists and defines
two functions:
1) u_int32_t cpu_timestamp(void);
returns the 32 low order bits of a reasonably high frequency counter.
2) int cpu_havetimestamp(void);
returns non-zero if cpu_timestamp() actually works.
The timestamp counter should run at a frequency greater than 1 MHz
(otherwise, microtime would be sufficient); other than that, the exact
frequency and origin of the counter are unspecified.
doing a cpu_set_kpc(), just pass the entry point and argument all
the way down the fork path starting with fork1(). In order to
avoid special-casing the normal fork in every cpu_fork(), MI code
passes down child_return() and the child process pointer explicitly.
This fixes a race condition on multiprocessor systems; a CPU could
grab the newly created processes (which has been placed on a run queue)
before cpu_set_kpc() would be performed.
- Change ktrace interface to pass in the current process, rather than
p->p_tracep, since the various ktr* function need curproc anyway.
- Add curproc as a parameter to mi_switch() since all callers had it
handy anyway.
- Add a second proc argument for inferior() since callers all had
curproc handy.
Also, miscellaneous cleanups in ktrace:
- ktrace now always uses file-based, rather than vnode-based I/O
(simplifies, increases type safety); eliminate KTRFLAG_FD & KTRFAC_FD.
Do non-blocking I/O, and yield a finite number of times when receiving
EWOULDBLOCK before giving up.
- move code duplicated between sys_fktrace and sys_ktrace into ktrace_common.
- simplify interface to ktrwrite()
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
kernel should only be used for experimentation
comment out some stuff not present or used on my development machine
g/c ef
add (commented out) aha attachment
from db_stack_trace_cmd() to db_stack_trace_print(),
and add an additional argument, a function pointer for an
output routine (i.e. printf() or db_printf()).
Add db_stack_trace_cmd() in db_command.[ch], calling
db_stack_trace_print() with db_printf() as the printer.
Move count==-1 special handling from db_stack_trace_print() [nee
db_stack_trace_cmd()] to db_stack_trace_cmd() [nascent here].
Again, I'm unable to test compilation on all affected platforms,
so advance apologies for potential brokenness.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
pointer indicating how to print the symbol. This allows db_printsym()
to called in places where db_printf() is not an appropriate output
function.
While straightforward, apologies in advance if I've introduced any minor
syntax errors; I was unable to test compilation this on all the affected
platforms.
addresses the problems seen by Jason Thorpe <thorpej@netbsd.org> and
Erik Berls <cyber@netbsd.org> necessitating rev 1.20 of
biosboot/main.c.
Move BOOTSEG from 0x100 to 0x1000.
Move heap from 0x10000 to 0x20000.
XXXXXXXX
This is a Kluge From Hell to allow boot blocks to grow a little larger
without diskbuf[] crossing a 64k boundary.
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
from biosboot via the "consdev" command.
Move "Press return" printf() out of print_banner() so we can
print_banner() reasonably after switching devices.
found in some older IBM PS/2 machines.
This code is based upon work by Scott D. Telford, with some minor bits
in arch/i386/mca/mca_machdep.c taken from FreeBSD.
XXX this is still very experimental and development version; use at your
XXX own risk
all the time (which crashes some vaios), get the static configuration,
and if config_search() finds a node, then do the dynamic configuration.
This seems to work fine on multiple vaios (which seem to crash
in different places...go figure).
Also, bring prototypes in-line with KNF and declare static as appropriate.
"#if 0" out pnpbios_getapmtable() and pnpbios_setnode() as they
are not called.
Fix printf()s to print out dv_xname.
Fix a comment typo.
Use manifest constants (PNP_CF_DEVCONF_DYNAMIC, etc.) in calls to
pnpbios_getnode() instead of hardcoded constants.
