Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
95,818 Commits 606 Branches 0 Tags 3.1 GiB
fa97a362d4
Commit Graph

95818 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
onoe
fa97a362d4 Support WI_RID_SCAN_APS (wiconfig -D) for Symbol CF Card. 
It apparently requires newer firmware (3.10.4), and doesn't work on
Intel PRO/Wireless 2011 (2.0.11).
 2002-04-16 07:24:06 +00:00
martin
22143f5a44 Add strtoul.c, otherwise kernels using "wi* at pcmcia?" do not work 
anymore.

Why only four archs provide this is beyound me.
 2002-04-16 06:36:02 +00:00
martin
d200477ffe Yet another nit pick. 2002-04-16 06:11:39 +00:00
enami
6cfcfb947c genfs_{compat_}getpages(): For PGO_LOCKED request, it is safe to return 
read only page if it was due to read fault.  This avoid many unnecessary
read fault introduced by recent nfs_bio.c change.  Reviewed by chuq.
 2002-04-16 06:05:05 +00:00
enami
08625200a0 KNF and other misc. cosmetic changes. 2002-04-16 06:00:46 +00:00
lukem
33e7bb62d6 - Convert to using distrib/common/buildfloppies.sh, which can build both 
single and multi-volume floppies in better fashion that the crufty
  shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent
 2002-04-16 05:23:33 +00:00
thorpej
bbdbd9ab37 Add i80321 DMA controller registers. 2002-04-16 04:50:14 +00:00
lukem
2db638e823 buildfloppies.sh -- build floppy images from the given files. 
It can write multiple disks (up to a maximum number), and optionally
install a bootstrap or pad the last disk to the image size.
 2002-04-16 04:28:23 +00:00
msaitoh
1b117bda9b pass arg 4 of a qsort() correctly. 2002-04-16 03:49:57 +00:00
itojun
9b96df2ed3 NOCRYPTO is no longer used and has no effect, so remove documentation 2002-04-16 03:47:32 +00:00
uwe
42c0a37e03 Add Krups (sparc) devices. 2002-04-16 03:08:12 +00:00
gmcgarry
fd08163598 Replace vax-specific cross references with MI ones. 2002-04-16 02:53:16 +00:00
mycroft
1d4148b8f4 Run reboot(8) and halt(8) from system(), not run_prog(). 2002-04-16 02:20:17 +00:00
mycroft
6b51f6a75b Use reboot -q' and halt -q' to make it reboot faster. 2002-04-16 02:06:09 +00:00
mycroft
e84a828ff1 In single-user, after taking a signal and having the `shell' die with 
SIGKILL, go into an infinite loop (like in the runcom SIGTERM case), on the
assumption that reboot(8) is in the middle of taking the system down.
This fixes `panic: init died' from sysinst.
 2002-04-16 01:59:37 +00:00
tron
0f55b8bb08 Use vfork(2) and exec(2) instead of system for performance and security 
reasons.
 2002-04-15 21:08:41 +00:00
gmcgarry
f030856690 typo 2002-04-15 20:57:55 +00:00
manu
28a3cfe032 Do not restore SR on sigreturn: this could enable the user process to gain 
unpropre privileges.
 2002-04-15 20:48:12 +00:00
tron
7b03e17cb9 Don't invoke the up- and down-script for link local IPv6 addresses. 2002-04-15 20:42:37 +00:00
martin
cd924e0a08 nit pick. 2002-04-15 18:08:22 +00:00
tron
c28d45defe Invoke "ip-up" and "ip-down" script with parameters exactly matching 
those used by pppd(8).
 2002-04-15 17:32:18 +00:00
thorpej
d533e315ee Fix a typo and an omission in last. 2002-04-15 17:27:39 +00:00
bjh21
1f1695ddff Build the keymap-generating programs as hostprogs, since they're only run 
on the host system and never installed.

Install the generated keymaps using <bsd.files.mk> rather than by hand, so
that all the UNPRIVED magic can work.
 2002-04-15 17:27:33 +00:00
bjh21
5178253d62 Only include opt_*.h #ifdef _KERNEL_OPT. 2002-04-15 17:05:13 +00:00
mycroft
aa878fabc4 For 78Q2120 revisions 3 and earlier, punt to ukphy, as our special media status 
routine does not work on those chips.
 2002-04-15 16:50:52 +00:00
christos
6d2cc5b8e6 - open for r+, then w+, then r. 
- fix fread and fwrite error checking.
 2002-04-15 16:47:03 +00:00
thorpej
bc6522fb34 Add bits for the XScale Auxillary Control Register. 2002-04-15 16:34:32 +00:00
onoe
a40f47b098 Add support to Symbol Wireless Networker CF card. 
The card is Type 1 CF card and it doesn't have firmware in.
So we need to download the firmware image into the card before
touching it.
XXX downloading code should be written in generic (bus independent),
    but I don't have enough information for now.
 2002-04-15 15:05:58 +00:00
mycroft
69bae7ce64 Add wm. 2002-04-15 15:00:18 +00:00
onoe
410544177a Generated from the firmware binaries for T3 series CF adapter. 
Obtained from Tim Gardner <timg@tpi.com> who developoed the Linux driver.
And approved by Brad Lefore <blefore@sj.symbol.com> to redistribute it
with BSD license.
 2002-04-15 14:58:51 +00:00
tsutsui
2168ee307b Remove (commented-out) pmsi entries. 2002-04-15 14:47:03 +00:00
mycroft
0a948745d1 Regen. 2002-04-15 14:44:30 +00:00
mycroft
9d7578b25c Use chip numbers for most of the new Adaptec IDs, not board numbers. 2002-04-15 14:43:42 +00:00
tsutsui
ac00a8493f Set KERNEL_SUFFIXES=ecoff 2002-04-15 14:41:39 +00:00
msaitoh
22868c18c1 ADD MISSING "TARGET_DEFAULT" BIT WHEN LITTLE ENDIAN 2002-04-15 13:24:54 +00:00
skrll
6024d2c603 Nuke pmsi 2002-04-15 12:52:28 +00:00
christos
3baa6002c6 PR/16361: J. Mallett: make(1)'s job.c does not properly initialise postCommands 2002-04-15 12:45:33 +00:00
joda
518cc55c27 Maxtor D040H2 also can't modesense 2002-04-15 12:40:28 +00:00
ad
e200da16d8 Regen. 2002-04-15 11:12:46 +00:00
ad
aad41f43b6 Add a bunch of Adaptec, Dell and HP products. From OpenBSD. 2002-04-15 11:12:25 +00:00
leo
6b640fdcec Fix PR-16305. Make the 'end' symbol local. 2002-04-15 09:29:56 +00:00
mhitch
77b771d03b Don't copy boot.amiga to ${DESTDIR}/ - it is now done by the install/update 
script, sysinst, or manually when the bootblock is installed.
 2002-04-15 08:38:55 +00:00
pooka
eaf1f18146 Bump to nb7 after fixing FreeBSD PR #12801 (again) in a way which hopefully 
doesn't have adverse side-effects.
 2002-04-15 08:37:04 +00:00
pooka
a68282c497 Fix FreeBSD PR #12801 in such a way that it doesn't create unfortunate 
side-effects, like the ones described in bin/15891 and bin/16210.

patch from Sven Verdoolaege (nvi maintainer)
 2002-04-15 08:31:42 +00:00
martin
ed5298eb2f Make the LEDs work. 
Green LED = we have a TEI assigned, yellow LED slow blinking = one B-channel
in use, yellow LED fast blinking = both B-channels in use.
 2002-04-15 08:11:00 +00:00
ad
4f7cf03e41 Add an RCS Id, and comment out the settings since they represent what the 
defaults are - per Andrew Brown's suggestion.
 2002-04-15 07:48:00 +00:00
simonb
50d6d2b7d6 Add pcn, pnaphy. 
Add algor, evbmips, sbmips devices.
Sort.
 2002-04-15 07:37:17 +00:00
simonb
2e3d50dbd3 Add algor and evbmips attachments. 2002-04-15 07:33:27 +00:00
martin
bc96c942e9 This card issues a constant stream of interrupts (from an internal timer). 
Make it do this only while /dev/isdn is open.
 2002-04-15 06:59:51 +00:00
gmcgarry
3238830b82 rtc is used on hp300 2002-04-15 06:08:19 +00:00