93eb82ff2f
Recognize the Intel InBusiness.
2000-03-16 23:41:40 +00:00
56460ec830
Regen.
2000-03-16 23:41:30 +00:00
3f182de5c6
Add product ID for the Intel InBusiness 10/100 Ethernet adapter (which
...
is an i82559 with a different product ID).
2000-03-16 23:36:44 +00:00
cdc4484e47
Regen.
2000-03-16 21:51:45 +00:00
94f5fe4392
Add Altec ADA70 speakers and have them recognized despite announcing an
...
old rev of the USB audio spec.
2000-03-16 21:51:23 +00:00
34329d9139
regen.
2000-03-16 18:28:11 +00:00
348fff03fb
add I/O DATA USB-ET/TX USB ethernet adapter.
2000-03-16 18:27:21 +00:00
9eb76252d0
Regen.
2000-03-16 16:48:59 +00:00
8a8e062c16
cards for if_awi:
...
Add AirSurfer Pro
Change the name for AMD Am79C930. The same CIS strings are used
both for Melco WLI-PCM and NTT-EL SS Magic.
2000-03-16 16:38:41 +00:00
afaa5767a3
Match shutdown msg with that of cac.c.
2000-03-16 15:13:05 +00:00
534da504b9
Cosmetic change.
2000-03-16 15:09:59 +00:00
a81a812b50
Remove unneeded field in 'struct cac_ccb'.
2000-03-16 15:07:22 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
6e0e3d609f
Replace LE() macro with le32toh()/le32toh().
2000-03-16 12:40:51 +00:00
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
f44ddd61a9
Do bus-specific interrupt handling (i.e. ahc_pci_intr) via a bus_intr
...
field in the softc, instead of relying on NPCI > 0. This would
prevent things from compiling if PCI buses were in the config file,
but ahc was attached only to something else than the PCI bus.
2000-03-16 10:33:45 +00:00
f52c9620bc
Place 34 by 80 console at the center of screen.
2000-03-16 05:50:57 +00:00
0b765ee6f8
Retain rendering performance lossage by rasops, but suffering
...
flexibility in turn; this renderer is 2B stroke (less than 16 pixel
width) font only. If 1B stroke (less than 8 pixel width) font is
ever supported, the font data should be converted into 2B stroke
during font initialization process. 'wsfont_realize()' is to be
proposed in order to have 'CPU and/or accelerator hardware friendly'
format to squeeze maxinum performance.
2000-03-16 05:48:28 +00:00
aa8b5ebd93
On initialization failure, free all the storage allocated to store
...
component pathnames rather than the last one.
2000-03-16 03:54:01 +00:00
5336e37153
Make this file just compiles again.
...
XXX Don't expect to work yet. It fails even to link depending on your
XXX kernel config file.
2000-03-16 03:06:51 +00:00
c99c03da4d
Make the USB event queue longer. Mine overflows before the (user-land)
...
event handler has started. But then I have about 25 devices connected. :)
2000-03-16 00:46:38 +00:00
1a9f0619fd
Fix thinko in the handling of FORCE_SHORT_XFER so that it actually
...
transfers a 0 length package instead on munging the whole transfer.
The aue driver works now.
2000-03-16 00:41:50 +00:00
f9fd27ea3c
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:41:29 +00:00
499e5cba01
Fix some uninitialized variables. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:40:30 +00:00
411a31adb2
- Go to splimp() when sending the rtsock message regarding link status.
...
- Would like to notify protocols if a link goes up or down, to e.g.
restart Duplicate Address Detection, etc. Add a comment to this
effect.
2000-03-15 20:34:43 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
fbc4dbb7ac
Catch up to rearranged aic7*.h files
2000-03-15 07:17:06 +00:00
220005d941
Eliminate unused sc_cookie field of struct ioasic_softc.
2000-03-15 03:07:44 +00:00
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
085f68836e
Common code for EISA and VL frontends for the ahc driver, split off
...
by Noriyuki Soda when updating for the new ahc driver.
2000-03-15 02:06:18 +00:00
7df6153163
Update EISA frontend for new ahc driver (done by Noriyuki Soda).
2000-03-15 02:04:43 +00:00
2da1f00fcd
Update cardbus frontend for new ahc driver.
2000-03-15 02:03:51 +00:00
d025f5705e
Add a couple of defines/aliases for messages.
2000-03-15 02:02:37 +00:00
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
1e1f1f3b3b
Make sure the USB event thread discovers all devices first time it call
...
usb_discover().
It should now be possible to have the root NFS mounted over a USB Ethernet
adapter.
2000-03-14 23:13:12 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
65da099cb1
Unnecessary to enclose device driver body with #if NASC > 0.
2000-03-14 08:23:29 +00:00
2eb68c00d2
Respect video console colour designation by configration file.
2000-03-14 08:04:06 +00:00
80c0893a8b
Switch to improved flexible video console text rasterizer provided by
...
rasops and wsfont.
2000-03-14 06:25:21 +00:00
ae493d8845
Resolve LP64 issues.
2000-03-14 04:23:14 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
e2850da406
Regen.
2000-03-13 21:17:32 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
9f0c40cff1
Add Palm serial adapter.
2000-03-13 17:14:27 +00:00
112137cd30
Added Artec/Ultima A6000C scanner to the quirks table (no LUNs).
2000-03-13 09:56:26 +00:00
035f58c823
HPC/PsPC keyboard types.
2000-03-13 01:46:44 +00:00
a7f01b4816
Fix DMAADDR():
...
Return the mapped address of the block, not the kernel address.
A uhci device now finds devices on my pc164.
2000-03-12 23:10:29 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
ce6f0100c1
Remove extra \n in attach message.
2000-03-12 19:16:48 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
058d87a788
Add a new frame buffer identifier for the hpcmips.
2000-03-12 04:59:24 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
42144199a1
- Make the pcppi and pckbd drivers cooperate a little more -- pckbd provides
...
a call to hook up a bell-ringer (since the keyboard itself has no bell).
This eliminates the need for #ifdefs for the bell-ringer in the pckbd
driver.
- Add cnbell() support to pckbd.
2000-03-06 21:40:08 +00:00
da4dc67d3e
Add cnbell() support.
2000-03-06 21:37:16 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
41aade98ba
Generate better error codes on bulk write.
2000-03-06 20:59:17 +00:00
119a2a3a80
Remove irrelevant comment.
2000-03-06 20:58:39 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
68484a4ad9
- Remove redundant assignment.
...
- Don't disestablish shutdown hook if we can't establish it.
- Noneed to manage resouces individually.
2000-03-06 10:31:27 +00:00
9066b12bbb
Remove redundant assignment.
2000-03-06 10:21:46 +00:00
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
e65044e30d
Get rid of hook for dk_establish() - pmax will now use device_register().
2000-03-06 03:08:32 +00:00
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
d610ec4cb0
Add Norwegian keymap from Haavard Lygre.
2000-03-05 08:56:53 +00:00
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
1231bd6d14
Umm... don't allow attempts to configure the same RAID device multiple times.
...
The check was there, but the return() was missing :(
2000-03-04 06:03:21 +00:00
3b06f6f887
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller.
2000-03-04 05:43:51 +00:00
0049933f0f
Reorganize some comments.
2000-03-04 04:22:34 +00:00
194aba4e41
Garbage collect the (already disabled) "random" queue type.
2000-03-04 03:27:13 +00:00
612e2e8f92
Nuke an unneeded #define.
2000-03-04 03:22:17 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
88a8d06a0b
Use the common disk allocation code, rather doing things the old way.
2000-03-03 03:47:17 +00:00
142175b1a1
Minor formatting cleanup.
2000-03-03 03:10:03 +00:00
7b1139520e
More minor cleanup.
2000-03-03 02:04:48 +00:00
87f46374bb
Minor cleanup. No functional changes.
2000-03-03 01:46:36 +00:00
2dda67d4a2
Fix typo in argument to ratecheck().
2000-03-02 15:49:29 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
thorpej