KAUTH_REQ_NETWORK_NFS_EXPORT and KAUTH_REQ_NETWORK_NFS_SVC, and use them
to replace two KAUTH_GENERIC_ISSUSER calls in the NFS code.
Also replace two more with KAUTH_SYSTEM_MKNOD, where appropriate.
Documetnation and examples updated. More to come.
Make the FreeBSD and Linux compat code convert the parameters to their
native representation and call the native routines.
Remove KAUTH_PROCESS_SCHEDULER_GET/SET.
Update documentation and examples.
XXX: For now, only the Linux compat code does the priority conversion
XXX: right.
Linux priority conversion code from yamt@, thanks!
Okay yamt@.
- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).
Okay blymn@.
words, don't pass an action and a request, and just use a single action to
indicate what is the operation in question.
This is the first step in fixing PR/37986, which calls for policy/priority
checking in the secmodel code. Right now we're lacking room for another
parameter required to make a decision, and this change makes room for such.
it is deprecated, no longer required, and will be removed in a future
release of NetBSD.
Dramatically reduce the size of the session structure by removing an
IOV_MAX array of iovecs where only the first was use. Saves an 8k
bzero on each session creation.
Convert fixed-size allocations in cryptodev.c to pools.
OpenSSL:
1) Fix extremely misleading text in crypto.4 manual page so it does not
appear to claim that a new cloned file descriptor is required for every
session.
2) Fix severe performance problem (and fd leak!) in openssl cryptodev
engine resulting from misunderstanding probably caused by said manual
page text.
3) Check for session-ID wraparound in kernel cryptodev provider. Also,
start allocating sessions at 1, not 0 -- this will be necessary when
we add ioctls for the creation of multiple sessions at once, so we
can tell which if any creations failed.
- Add a KAUTH_PROCESS_SCHEDULER action, to handle scheduler related
requests, and add specific requests for set/get scheduler policy and
set/get scheduler parameters.
- Add a KAUTH_PROCESS_KEVENT_FILTER action, to handle kevent(2) related
requests.
- Add a KAUTH_DEVICE_TTY_STI action to handle requests to TIOCSTI.
- Add requests for the KAUTH_PROCESS_CANSEE action, indicating what
process information is being looked at (entry itself, args, env,
open files).
- Add requests for the KAUTH_PROCESS_RLIMIT action indicating set/get.
- Add requests for the KAUTH_PROCESS_CORENAME action indicating set/get.
- Make bsd44 secmodel code handle the newly added rqeuests appropriately.
All of the above make it possible to issue finer-grained kauth(9) calls in
many places, removing some KAUTH_GENERIC_ISSUSER requests.
- Remove the "CAN" from KAUTH_PROCESS_CAN{KTRACE,PROCFS,PTRACE,SIGNAL}.
Discussed with christos@ and yamt@.
PR/37692 from Yojiro UO
---
uhmodem: device driver for huawei 3G wireless modem
* what it is?
A device driver for huawei 3G wireless modem, E220 and its valiations.
The devices are very simuler to ubsa device, but they need special care
to use as modem device.
This patch introduce "uhmodem (USB Huawei modem)" for the devices.
A uhmodem device has two com devices and one USB mass strage device.
The driver enable to use all of them.
* dmesg:
uhmodem0 at uhub0 port 1 configuration 1 interface 0
uhmodem0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
uhmodem0: mass storage only mode, reattach to enable modem
uhmodem0: at uhub0 port 1 (addr 2) disconnected
uhmodem0 detached
uhmodem0 at uhub0 port 1 configuration 1 interface 0
uhmodem0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
ucom0 at uhmodem0 portno 0: modem
ucom1 at uhmodem0 portno 1: monitor
umass0 at uhub0 port 1 configuration 1 interface 2
umass0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
cd0 at scsibus0 target 0 lun 0: <HUAWEI, Mass Storage, 2.31> cdrom removable
that acts as PCI-ISA bridge and supports a Timecounter, Watchdog Timer
and GPIO.
Adapted by Yojiro UO and minor tweaks by me from OpenBSD. Tested on
CS5535 and CS5536. This closes PR kern/37577.
Been running in my tree for over a month at least.
Reviewed and okay yamt@, and special thanks to him as well as rittera@
for making this possible through fixing NDIS to not call fork1() with
l1 != curlwp.
* Add a nooutput function to be used instead of redirecting to /dev/null,
because /dev/null might not exist early in the boot sequence. This
should fix a bug in which the pax autodetection failed when used from
init(8) with a read-only root file system without a /dev/null.
* Move most of the main program into a new makedev_main function,
to allow reuse by MAKEDEV.local.
In MAKEDEV.local:
* Use the new makedev_main function defined in MAKEDEV. This allows
MAKEDEV.local to support all the options understood by MAKEDEV, instead
of only a subset. This should fix a bug in which the setup() function
could try to use pax mode even though that was previously not supported.
In MAKEDEV.local man page:
* Update list of command line options.
* Don't explain all the options, just refer to MAKEDEV(8) man page.
* Remove BUGS section now that all MAKEDEV options are supported
by MAKEDEV.local.
man8/man8.i386/dosboot.8, and man8/man8.i386/pxeboot.8.
* In all:
- First few lines of each man page should be .Dd, .Os, .Dt, .Nm;
- Use Nx; new sentence, new line; serial comma;
- Update comments about which files to keep in sync.
* In MI boot(8):
- add reference to architecture-specific boot(8);
- add commented-out reference to boot.cfg(5);
- reinstate BUGS heading that was lost when the MI boot.8 was
created from i386 boot.8.
* In i386 boot.8:
- mention -x and -z flags;
- we can boot from media other than floppy, or from the network;
- remove first paragraph in BUGS section now that an MI boot(8)
man page exists.
* In i386 dosboot.8 and pxeboot.8:
- mention -c, -x, and -z flags.
Improve the documentation around that.
* The "-p pax", "-m mknod", and "-s" (mtree specfile) options should
always have been mutually exclusive. Now enforce that.
* The "-f" option didn't ever work with pax or mtree mode; document that,
and make it an error to try something that won't work.
* Make pax mode the default, if no other options prevent this, and if
"pax -w -M" appears to be usable.
* Add missing options to a usage message.
volumes that are migrating such as when you change the stripe size.
While I'm here use the same string than we had in the old framework to
report status "online" vs "drive is online", because the sensor might be
a RAID volume and not just a drive.
