f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
8634976fb2
Move conversion of PRAM-time to UNIX-time to clock.c (like mac68k).
1998-11-04 15:06:13 +00:00
28411139b3
be consistent with locking of amaps and anons when freeing them.
1998-11-04 07:07:22 +00:00
e4c4ea06b4
remove outdated comment.
1998-11-04 07:06:05 +00:00
2d3363a6d0
regen.
1998-11-04 06:41:57 +00:00
b0e0dc2101
(manufacturer, product) = (0x149, 0x265) is used both
...
"Linksys EthernetCard" and some new versions of "D-Link DE-650".
Changed the product string as such.
1998-11-04 06:40:54 +00:00
5bf12ef4b9
Allow newer versions of D-Link DE650 cards (the manufacturer and
...
the product are valid and the same as Linksys EthernetCard's) work
with the current ne driver.
Somewhat kludgy.
1998-11-04 06:37:09 +00:00
23ed4b5656
we must unlock a vp's object's lock before calling vrele().
1998-11-04 06:21:40 +00:00
61458d7dfa
LOCKDEBUG enhancements for non-MP:
...
keep a list of locked locks.
use this to print where the lock was locked
when we either go to sleep with a lock held
or try to free a locked lock.
1998-11-04 06:19:55 +00:00
42921bd66d
Add the ex driver.
1998-11-04 00:40:03 +00:00
21ab4a980a
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards.
1998-11-04 00:31:59 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
28221c24db
Add info for ex driver.
1998-11-04 00:28:05 +00:00
6768f892cc
Add sqphy.
1998-11-03 23:52:50 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
46f5a5f507
Make "src/sys/arch/i386/stand" compile again.
1998-11-03 22:00:37 +00:00
873f0be1cd
Sync with files in "src/lib/libz".
1998-11-03 15:49:39 +00:00
4401599ff3
These should have been added together with leo.c a long while ago :-( Thanks
...
to 'entropy' for keeping an eye on me...
1998-11-03 14:50:15 +00:00
0b3665db48
Add "Paddington" ID.
1998-11-03 12:15:57 +00:00
44dfb8ea2c
Define the size of the members of utsname in terms of _SYS_NMLN, and
...
define SYS_NMLN if not POSIX or XOPEN source.
1998-11-03 10:08:32 +00:00
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
ec38cdc6d9
Add icsphy*.
1998-11-03 00:12:45 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
be4ce8c3f4
Add "10baseT-FDX" and "100baseTX-FDX" aliases to the end of the subtype
...
table. These are actually subtype+option combos, but these are the
strings displayed by the MII code to indicate 10Mbps full-duplex and
100Mbps full-duplex respectively, and it's Nice that ifconfig(8) can
grok them.
1998-11-02 22:10:26 +00:00
67f74ebee4
Implement the new BUFCACHE option.
1998-11-02 07:43:37 +00:00
cee6f4a531
Implement the new BUFCACHE option.
1998-11-02 04:43:23 +00:00
d9b5b0b01a
Sync with files in "src/lib/libz".
1998-11-01 21:28:51 +00:00
e45fa5e3bb
add version for libkeycap
1998-11-01 17:14:27 +00:00
eccf9ccdd8
s|share/misc|share/pcvt|
1998-11-01 16:37:06 +00:00
d04b2d9043
implement BUFCACHE, which sets the size of the buffer cache to BUFCACHE %
...
of physmem. if not set (or == 0), falls back to old sizing method.
1998-11-01 09:51:09 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
3bcd2ef84d
fix botched printout format
1998-11-01 00:03:08 +00:00
82b48f66b6
If NSIO not defined, compile errors.
1998-10-31 23:51:05 +00:00
e4d73206ab
Make the exec header an automatic variable, instead of malloc()ed space.
...
Saves 60 bytes of code.
1998-10-31 22:40:27 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
32a315ff7c
Use the so_send and so_receive funcptrs in the socket instead of calling
...
sosend/soreceive directly. [I've been meaning to commit these for months.]
1998-10-31 01:18:41 +00:00
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
266aaad811
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019
...
and 8029 NE2000-compatible Ethernet chips.
1998-10-31 00:43:19 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
thorpej